M74 is one of four models of new MULTITEST family of portable meters, which included also M72, M73 and M75 meters, designed to perform Global Earth Resistance measurements, trip out time test on AC RCD type, Insulation and Continuity of earth conductors according to VDE and IEC common standards on typical urban electrical installations. Powerful AUTOTEST feature permits to M74 to quickly perform an automatic sequence of the above tests directly to the plugs of electrical plants with OK or NOT OK response results.M74 meter also include others features as phase sequence with 1 wire method, leakage current with optional transducer clamp and a powerful DMM function for TRMS measures of voltage and current ideal for troubleshooting operations both in civil and industrial environments. Voltage and current peak measure on 1ms it's also ok for inrush current evaluation of electrical motor devices.As each model of MULTITEST family also M74 have a large LCD display for easy readings, a modern and ergonomic external case, a innovative electronic function selector for easy to use and a protection rubber holder to prevent accidental damaged.

Features:

• Continuity test of protective conductors with 200mA
• Insulation Resistance with 250, 500VDC
• Trip-out time of RCDs type AC Standard
• Test current selectable; 30mA, 30x5mA, 100mA, 300mA
• Global Earth Resistance without RCD tripping
• Global Earth Resistance with 0.1Ohm resolution
• AUTOTEST function: automatic test of Global Earth Resistance + RDC test + Insulation test
• DC Voltage
• AC TRMS Voltage
• Automatic detection of AC/DC signals
• AC TRMS Current with optional clamp
• AC TRMS Leakage current with optional clamp
• Resistance
• Continuity test with buzzer
• Frequency with test leads
• Frequency with optional clamp
• Phase sequence with 1 or 2 wires method
• Phase coincidence with 1 or 2 wires method
• MIN/MAX/AVG functions
• PEAK function with response time 1ms
• HOLD function
• Auto Power OFF

What's included:

C2075: two safety banana + Shuko plug cable
KIT0075: kit of 2 Test leads + 2 alligator clips
BORSA75: Carrying bag
Calibration Certificate ISO9000
Instruction manual
Warranty card

The Anton ACMD is an easy to use and reliable self-contained Carbon Monoxide alarm. Designed for use in all domestic environments such as homes and static caravans, providing protection against the dangers of Carbon Monoxide poisoning.

Features:

• Batteries supplied & Pre-fitted
• No maintenance
• No mains power
• Easy to install & use
• No sensors to replace
• Approved to EN50291:2001
• Superior sensing technology
• Continuous self test function
• 6 year guarantee, up to 7 year life
• Automatic sensor adjustment function ensures complete accuracy

The new Megger 1001-046 is a sleek and compact machine. It prints labels from 3.5mm to 24mm wide and features an automatic tape cutter. With the new plug and print feature this product requires no software installation. Just highlight your text on your PC and press print - simple as that!

Features:

• Convenient automatic cutter for accurate label length
• Get creative, with customised labels printed direct from your PC
• Save time with up to 10mm per second printing
• Perfect choice for your home office
• Extra versatility – print labels to 3.5, 6, 9, 12, 18 & 24mm
• Durable – labels up to 24mm, able to handle extreme conditions
• Conveniently comes with 24mm black on white tape (8m)
• Save time, print labels instantly with plug and print
• Space-saving compact, stylish design

What's included:

• Labelling Machine
• AC adapter (Model AD-24)
• 1 x 24mm Black on White TZ tape (8 metres)
• USB Cable
• CD ROM (P-touch Editor 5.0 for Windows, Printer Driver)
• User Guide

Peak performance and I-V characteristic curve analyzer for PV systems

Portable measurement device (SOLAR-4000 ANALYZER)
The new SOLAR-4000 is capable of determining current characteristic values not just from individual PV modules, but also from module strings. The I-V characteristic curve, the short circuit current, open circuit voltage, power, irradiance, temperature and inclination angle are recorded by a 16-bit processor. For each measurement the SOLAR-4000 determines the optimal range and sampling rate. The instrument is simple and intuitive to operate via a menu-driven colour touch screen. The characteristic curve measured by the SOLAR-4000 will be extrapolated to standard test conditions by using of the measured values of the sensor and then displayed. In addition, the manufacturer‘s STC ideal characteristic curve can be displayed as well using the integrated module database.

Wireless sensor (SOLAR-4000 SENSOR)
The wireless sensor measures the cell temperature without direct contact, as well as the inclination angle and the irradiation in the solar module level. The measurement values are transmitted directly to the main device by radio signal. To measure the irradiation, the device switches the reference cell automatically from a monocrystalline to a polycrystalline cell.

Evaluation software
The module data measured can be evaluated, managed and stored on a PC using the software. The performance data is computed and can be compared with STC values. In just a few steps, the measurement data is stored by using a wizard in the respective customer folder or plant folder as part of a tree-type file structure. Further measurements from the same plant can be added with date stamp at will and compared with the software.

Features:

• Quick and precise measurement - approx. 15...30 s
• Simple identification of errors and defects affecting PV plants and modules
• Very light and easy-to-handle measurement device
• Wireless communication between ANALYZER and SENSOR
• Contactless temperature measurement
• Measurement of monocrystalline and polycrystalline cells (measurement of thin-layer modules on request, without STC computation) Easy menu guidance via colour touch screen
• Large measrement range: 1.0…1000 V and 0.1…15.0 A
• Reporting: plant and maintenance certificates
• Performance comparison for a plant over several years
• Built-in battery allows measurement over several hours
• Measurement device and software includes over 5000 module data items
• Regularly available module data updates free of charge
• Quick and easy sensor assembly using quick-fix mounting (in scope of supply) directly to solar module
• Evaluation software included in scope of supply

What's included:

SOLAR-4000 ANALYZER, SOLAR-4000 SENSOR, hard case with foam inlay, PV test lead set (MC3, MC4, Huber+Suhner, Tyco, SunClix
as well as without PV connectors), SENSOR (quick-fix) mounting, SD card (PC software with manual), USB SD/SDHC card reading device, 2x charging devices, user manuals.

Megger’s DET4 family of ground testing instruments offer a comprehensive solution to your ground stake and soil resistivity testing needs. The standard instrument comes with test leads, stakes, terminal adaptors for bare wire, batteries and calibration certificate are delivered in a tough carry case which has space to accommodate all the instrument accessories - everything you need to start testing in one kit.

The clear, easy-to-read display provides excellent contrast and viewing angle making the instrument ideally suited to outdoor use. The display is backlit, extending the operational environment of the instrument to cable cellars and other dark locations.

The instrument offers a wide measurement range of 0.01 Ω to 200 kΩ, ground noise voltage measurement from 1 V to 100 V and ground current from 1 mA to 20 A. Accurate results can be obtained in electrically noisy environments since the instrument is capable of rejecting noise voltages of 40 V peak to peak and the user can select different test frequencies to minimise the effect of interference.

The Megger ground testers comply with stringent safety standards and are rated to 100 V CAT IV. They also have selectable 25 V or 50 V output for compliance with IEC 61557-5.

Ingress protection
IP54

C stake, P stake and Noise check
Automatic

Noise rejection
40 V pk to pk

2-wire, 3-wire, 4-wire test
Yes, no shorting links required

No disconnect testing (ART)
Yes, with ICLAMP

Stakeless measurement
Yes, with ICLAMP and VCLAMP

Instrument output
Voltage: ±25 V or ±50 V at 94 Hz, 105 Hz, 111 Hz and 128 Hz
Current: 4.5 mA or 0.45 mA or 0.045 mA

Ground current range with clamp
0.5 mA to 19.9 A

Ground current accuracy
5% ±3 digits

Ground voltage range
0 to 100 V ac

Ground voltage accuracy
2% ±2 V

Resistance range
0.01 Ω to 200 kΩ

Resistance accuracy
2P measurements: 2% ±3 digits
3P measurements: 2% ±3 digits
4P measurements: 2% ±3 digits
ART measurements: 5% ±3 digits
Stakeless measurements: 7% ±3 digits

Maximum probe resistance
Rp limit: 200 kΩ (50 V output voltage)
Rc limit: 200 kΩ (50 V output voltage)
Limits reduced to 100 kΩ for 25 V output voltage
Limits reduced to 5 kΩ for 0.01 Ω resolution

Display
31⁄2 digit high contrast liquid crystal, backlit

Battery type
DET4TC2: 8 off AA (LR6) cells
DET4TCR2: 8 off AA (LR6) NiMH rechargeable cells

Operating temperature range
-15 °C to +55 °C / 5 °F to 131 °F

Storage temperature range
-40 °C to +70 °C / -40 °F to 158 °F

Safety
Complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs.

EMC
In accordance with IEC61326-1

Standards Compliance
Complies with the requirements of KEMA K85B
Complies with the following parts of EN61557, “Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective
measures”.
Part 1 - General requirements
Part 5 - Resistance to earth

Dimensions
203 mm x 148 mm x 78 mm (8 in x 5.8 in x 3 in)

Weight
1kg (2.2lb)

USB barcode scanner, compatible with selected Megger portable appliance testers (PAT Testers).

• Measures up to 1500ºF (816ºC)
• K-type thermocouples plug into digital multimeter or clamp meter voltage ports with 61-465 adapter

Intended for Ideal 61-255 SureTest Installation Tester

Remote Probe intended for Ideal 61-255 SureTest Installation Tester.

Intended for 35-053 Ratcheting Cable Cutter. Includes replacement bolt, locknut, and washer

Providing the ability to test single-mode fiber optic cables to certification standards. Simply plug into the "Connectorless" adaptor port on the SCT for instant use. Fitted with the ever popular SC fiber port.

Providing the ability to test multi-mode fiber optic cables to certification standards. Simply plug into the "Connectorless" adaptor port on the SCT for instant use. Fitted with the ever popular SC fiber port.

A replacement Channel adaptor for use with the Megger SCT2000. Used for connecting and testing the Channel Link of Category 7 Ethernet using the popular TERA connector. For use with Megger SCT2000 only.

A replacement Permanent Link adaptor for use with the Megger SCT2000. Used for connecting and testing the Permanent Link of Category 7 Ethernet using the popular TERA connector. For use with Megger SCT2000 only.

For an interactive virtual demo of the Megger SCT2000, please click here.

The SCT series are high-performance testers for certifying and evaluating copper and fiber cabling installations. The SCT Series are unmatched for flexibility with improved device features including 1/4 VGA color display, USB & serial ports; compact flash, secure digital, multimedia card storage, unit-to-unit audio and 64 Mb of internal memory.

The SCT series covers two models, the SCT1500 which allows testing and certification of copper ethernet up-to category 6/class E and the SCT2000 which allows testing and certification of copper ethernet to category 7/class F.

Both models also support testing and certification of single and multi mode fiber optic cable, with the optional adaptor, making the requirement for seperate instruments redundant. Additionally, the SCT2000 also supports testing of alien crosstalk, with the optional adaptor, for certification above category 6/class E.

Designed for cable installers and network owners who need to certify the performance of high-speed cabling to today’s industry standards and tomorrow’s emerging standards, the SCT Series delivers unmatched performance and accuracy. Whether certifying cabling installations, troubleshooting problems, migrating to a high-speed network, or re-certifying after add-ins, moves or expansions, the SCT Series exceeds expectations.

Cable Types:

Shielded and Unshielded Twisted Pair (STP and UTP)

LAN Cabling:
TIA Category 6, 5e: 100Ω
ISO/IEC Class F, E, D, and C: 100Ω

Foil-Screened Twisted Pair (ScTP):
TIA Category 6, 5e: 100Ω
ISO/IEC Class F, E, D, and C: 100Ω

Fiber:
Multimode Fiber Optics Adapter IEC14763 Compliant.
Wave Lengths: 850/1300 nm
Singlemode Fiber Optic Adapter.
Wave Lengths: 1310/1550 nm

Test Standards:
TIA Category 5e per TIA/EIA-568B
TIA Category 6 per TIA/EIA-568-B.2-1
TIA Category 6a per TIA/EIA-568C.2*
ISO Class F per ISO/IEC 11081
ISO Class E, D, C per ISO/IEC 11801
IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
TSB140 Fiber Certification Testing
MM and SM
TIA 568B
ISO 11801
EN 50173

* Requires additional AXT adapter.

Supported Tests

Frequency Measurements
NEXT; Power Sum NEXT (PSNEXT); Equal Level Far-End Cross Talk (ELFEXT); Power Sum ELFEXT (PSELFEXT); Insertion Loss; Return Loss; Attenuation-to-Cross Talk Ratio (ACR); Power Sum ACR (PSACR); Impedance.

Single Point Measurements
Delay; Delay Skew; Length; Wire Map; DC Resistance

Diagnostic Measurements
WireMap vs. Length; NEXT vs. Length; Return Loss vs. Length.

Display
1/4 VGA color display.

Input Protection
Protected against all continuous telco voltages, 100 mA over-current, and ISDN over-voltages.

Dimensions
Main unit and smart remote including link interface adapter:
9” x 5” x 2.5” (22.7 cm x 12.7 cm x 6.3 cm)

Weight
Main unit: 2 lbs., 11 oz (1.2 kg)
Smart remote: 2 lbs., 11 oz (1.2 kg)

Power
Primary and Secondary instruments:
Rechargeable NiMH battery 7.2V, 4000 mAH Typical battery life 10hours, with recharge time of 6 hours May be charged while in the instrument (instrument powered down)

Calibration
Service center calibration period is 1 year.

For an interactive virtual demo of the Megger SCT2000, please click here.

The SCT series are high-performance testers for certifying and evaluating copper and fiber cabling installations. The SCT Series are unmatched for flexibility with improved device features including 1/4 VGA color display, USB & serial ports; compact flash, secure digital, multimedia card storage, unit-to-unit audio and 64 Mb of internal memory.

The SCT series covers two models, the SCT1500 which allows testing and certification of copper ethernet up-to category 6/class E and the SCT2000 which allows testing and certification of copper ethernet to category 7/class F.

Both models also support testing and certification of single and multi mode fiber optic cable, with the optional adaptor, making the requirement for seperate instruments redundant.

The rugged design of the SCT series allows for peace of mind in varied environments. Absorbing the knocks of everyday use, the rubberized body of the SCT series also provides protection against the elements and allows a firm grip to be maintained on your instrument at all times.

Designed for cable installers and network owners who need to certify the performance of high-speed cabling to today’s industry standards and tomorrow’s emerging standards, the SCT Series delivers unmatched performance and accuracy. Whether certifying cabling installations, troubleshooting problems, migrating to a high-speed network, or re-certifying after add-ins, moves or expansions, the SCT Series exceeds expectations.

Cable Types:

Shielded and Unshielded Twisted Pair (STP and UTP)

LAN Cabling:
TIA Category 6, 5e: 100Ω
ISO/IEC Class F, E, D, and C: 100Ω

Foil-Screened Twisted Pair (ScTP):
TIA Category 6, 5e: 100Ω
ISO/IEC Class F, E, D, and C: 100Ω

Fiber:
Multimode Fiber Optics Adapter IEC14763 Compliant
Wave Lengths: 850/1300 nm
Singlemode Fiber Optic Adapter
Wave Lengths: 1310/1550 nm

Test Standards:
TIA Category 5e per TIA/EIA-568B
TIA Category 6 per TIA/EIA-568-B.2-1
ISO Class E, D, C per ISO/IEC 11801
IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
TSB140 Fiber Certification Testing
MM and SM
TIA 568B
ISO 11801
EN 50173

* Requires additional AXT adapter.

Frequency Measurements
NEXT; Power Sum NEXT (PSNEXT); Equal Level Far-End Cross Talk (ELFEXT); Power Sum ELFEXT (PSELFEXT); Insertion Loss; Return Loss; Attenuation-to-Cross Talk Ratio (ACR); Power Sum ACR (PSACR); Impedance.

Single Point Measurements
Delay; Delay Skew; Length; Wire Map; DC Resistance

Diagnostic Measurements
WireMap vs. Length; NEXT vs. Length; Return Loss vs. Length.

Display
1/4 VGA color display.

Input Protection
Protected against all continuous telco voltages, 100 mA over-current, and ISDN over-voltages.

Dimensions
Main unit and smart remote including link interface adapter:
9” x 5” x 2.5” (22.7 cm x 12.7 cm x 6.3 cm)

Weight
Main unit: 2 lbs., 11 oz (1.2 kg)
Smart remote: 2 lbs., 11 oz (1.2 kg)

Power
Primary and Secondary instruments:
Rechargeable NiMH battery 7.2V, 4000 mAH Typical battery life 10hours, with recharge time of 6 hours May be charged while in the instrument (instrument powered down)

Calibration
Service center calibration period is 1 year.

The Solar Survey 200 is a unique irradiance meter capable of measuring more than just light intensity. A built-in digital compass measures roof orientation, and a built-in digital inclinometer measures the roof pitch.

Suitable for both Solar Photovoltaic (solar PV) and Solar Thermal applications, the Solar Survey 200 measures irradiance up to 1250Wm-2 or BTU/hr/ftf2 via a micro-cell, meaning it acts as a solar cell and therefore offers a more relevant reading than other irradiance meters which use photo-diodes. In addition, the Solar Survey 200 also digitally measures ambient air and module temperature simulataneously.

All of the Solar Survey 200 measurements are taken in real time, and a hold function enables the screen to be frozen so that results can be recorded.

The Solar Survey 200 has the added benefit of a large internal memory and real-time clock for data logging purposes. This allows for irradiance and temperature to be recorded at user-defined intervals over a number of hours or days, the collected data can then be downloaded to a PC for analysis of for inclusion in installation reports.

Features:

• Measures irradiance as required by IEC 62446
• Built-in compass and inclinometer measure roof orientation and pitch
• Suitable for both photovoltaic and solar thermal installations
• Perfect for surveying potential solar sites
• Rugged, robust and handheld

Technical Specification:

Irradiance Display Range: 0 - 1500 Wm-2 or 0 - 500 BTU/hr/ft2
Measurement Range: 100 – 1250 Wm-2 or 30 - 400 BTU/hr/ft2
Resolution: 1 BTU/hr/ ft2 / 1Wm-2

Temperature Display Range: -30°C to +100°C
Measurement Ranges: -30°C to +100°C
Resolution: 1°

Compass Bearing Display Range: 0° to 360°
Measurement Ranges: 0° to 360°
Resolution: 1°

Inclinometer Display Range: 0° to 90°
Measurement Ranges: 0° to 90°
Resolution: 1°

Datalogger Datasets: 5000
Sample Rate: 1-60 minutes (user definable)

General Specifications:

Display: Custom LCD
Power Supply: 2AA Alkaline Batteries
Auto Power Down: After 2 minutes

Serviceability:

Warranty: 2 year
Calibration: 1 year

What's included:

Seaward Solar Survey 200 Irradiance Meter, Temp Probe, Driver CD, USB Cable, Quick Start Guide and Manufacturer Calibration Certificate.

A hand-held, battery-powered tool, the VFF projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. The VFF is equipped with a high-power, extra long-life, 650nm laser diode which operates either in Continuous (CW) or Modulated (MOD; 1Hz Pulse) mode. A push button allows the user to select the mode while preventing accidental operation. Any breaks will be seen as a conspicuously glowing or blinking red light area (in 3mm or smaller cables). A red LED on the outer case echoes the operation mode selected.

The VFF is useful over a distance of approximately 3km (2.3mi) into multimode fiber and 4km (2.5mi) into single mode fiber and can be used with single-mode and multimode cable. Use it as a stand-alone first-line basic troubleshooting tool, or in conjunction with an OTDR to pinpoint faults. The unit is packaged in a pocket-sized, rugged metal housing and is fitted with 2.5mm universal connector that accepts ST, SC and FC optical connectors. The VFF is also an excellent aide to technicians terminating mechanical splices or internal-splice style connectors where leaking light is an indicator of a poor fiber cleave or other misalignment.

Advanced fiber optic testing and troubleshooting capabilities are available with the FIBERTEK and TRACETEK accessory modules for the LANTEK 6/7G cable certifiers. FIBERTEK certifies fiber installations by measuring the attenuation and length of a pair of fibers simultaneously and generating printed certification reports. TRACETEK graphical display pinpoints faulty connectors and breaks in fiber optic cables at a fraction of the price of an OTDR.

Features:

• Finds Breaks, Faulty Splices and Crimps Poor Components or Connections
• Low-Cost, Basic Fiber Test Tool
• High Output, Class 2, 670nm Laser Diode

What's included:

Ideal VFF5, Carrying Case, Lens Cap, Batteries, Lanyard, and Instruction Sheet, Rugged, Metal Housing

Compatible with Ideal part number 33-984, 33-985, 33-986 and 33-988.

Compatible with Ideal SIGNALTEK-FO part numbers 33-984, 33-985, 33-986 and 33-988.

Optional 120-240V Power adaptor for Ideal SIGNALTEK™ & SIGNALTEK™ FO Testers.

The 540DK is a portable, battery operated device which fit’s easily in your pocket, tool kit or tool belt.

The 541TG transmits a distinctive tone through a pair of wires and the 542SP inductive probe senses this signal and amplifies it through its built-in speaker. In noisy situations a butt set or headphones can be attached.

The 541TG includes both an RJ11 connector for plugging in to standard telephone jacks and datacom RJ45 jacks. Alligator clips are supplied for attaching other wires or cable types, such as CATV or coax. The 3-position switch selects warble tone, continuous tone or off. The LED function will indicate continuity when switched to the CONT position or an active circuit if the device is in its OFF position.

Features:

• Tracing and continuity checking of telecom and datacom cables
• Ergonomic design aids grip and durability
• Probe’s unique rubber tip won’t break or crack
• LED lamp provides visual indication of correct wire
• External terminals for butt-set connection
• Volume adjustment knob
• Batteries included

Features:

• Rugged, steel construction for long-term durability
• Baked-on blue enamel finish resists corrosion and enhances visibility
• Convenient bending guide for offset bends
• Lifetime warranty

Features:

• Rugged, steel construction for long-term durability
• Baked-on blue enamel finish resists corrosion and enhances visibility
• Convenient bending guide for offset bends
• Lifetime warranty

Features:

• Lightweight aluminum construction for easy handling
• Heat treated for extra strength -- reinforced at stress points for longer life
• Precision-located degree scale, star, arrow and rim notch for perfect bends every time
• Markings are raised and cast into bender body on both sides for easy visibility
• Deeply serrated step helps prevent slippage when applying maximum leverage
• Grooved internal hook surface helps prevent conduit from slipping
• Flat hook surface provides stable starting point

Features:

• Ductile iron construction for added durability
• Heat-treated for extra strength -- reinforced at stress points for longer life
• Precision-located degree scale, star, arrow and rim notch for perfect bends every time
• Markings raised and cast into bender body on both sides for easy visibility
• Deeply serrated step helps prevent slippage when applying maximum leverage
• Grooved internal hook surface helps prevent conduit from slipping
• Flat hook surface provides stable starting point
• Lifetime replacement guarantee

Features:

• Ductile iron construction for added durability
• Heat-treated for extra strength -- reinforced at stress points for longer life
• Precision-located degree scale, star, arrow and rim notch for perfect bends every time
• Markings raised and cast into bender body on both sides for easy visibility
• Deeply serrated step helps prevent slippage when applying maximum leverage
• Grooved internal hook surface helps prevent conduit from slipping
• Flat hook surface provides stable starting point
• Lifetime replacement guarantee

Features:

• Lightweight aluminum construction for easy handling
• Heat treated for extra strength -- reinforced at stress points for longer life
• Precision-located degree scale, star, arrow and rim notch for perfect bends every time
• Markings are raised and cast into bender body on both sides for easy visibility
• Deeply serrated step helps prevent slippage when applying maximum leverage
• Grooved internal hook surface helps prevent conduit from slipping
• Flat hook surface provides stable starting point

Features:

• Ductile iron construction for added durability
• Heat-treated for extra strength -- reinforced at stress points for longer life
• Precision-located degree scale, star, arrow and rim notch for perfect bends every time
• Markings raised and cast into bender body on both sides for easy visibility
• Deeply serrated step helps prevent slippage when applying maximum leverage
• Grooved internal hook surface helps prevent conduit from slipping
• Flat hook surface provides stable starting point
• Lifetime replacement guarantee

Features:

• Ductile iron construction for added durability
• Heat-treated for extra strength -- reinforced at stress points for longer life
• Precision-located degree scale, star, arrow and rim notch for perfect bends every time
• Markings raised and cast into bender body on both sides for easy visibility
• Deeply serrated step helps prevent slippage when applying maximum leverage
• Grooved internal hook surface helps prevent conduit from slipping
• Flat hook surface provides stable starting point
• Lifetime replacement guarantee

Lightweight and durable pouch for Ideal 33-892 SecuriTEST™ PRO CCTV/Security Tester

• Test wiring configuration on UTP and STP
• Check for shorts, miss wires, reversals and split pairs
• Debug feature, automatic shut-off and low battery LED indicator
• Main unit and remote allow one person testing
• Designed to test installed twisted pair wiring
• Tests unshielded & shielded modular plugs
• Main unit and remote allow one person testing

The 920 Series Ground Resistance Tester from IDEAL enables electricians to test grounding systems without disconnecting the ground, saving both time and effort. By simply clamping around the grounding rod or ground conductor, it provides direct measurements of both ground resistance and ground leakage current. For the safest, quickest and most accurate means of grounding measurement, the 920 Series from IDEAL is the answer.

Features:

• Simple clamp-on operation
• Ground resistance measurement up to 1200Ω
• Ground leakage current up to 30AAC
• Noise check function
• Auto ranging
• Accommodates conductor size up to 1.25 in. (32mm) 1000 MCM cable
• Memory saves up to 99 readings
• Data hold
• Audible continuity buzzer
• Auto power off with alarm
• Backlight
• Audible resistance alarm
• Double reinforced insulation
• Includes protective case, calibration loop, user manual and four AA batteries

Troubleshoot and identify potential problems before they happen with the IDEAL HeatSeeker® Thermal Imagers. What makes HeatSeeker® so useful are the dual cursors that instantly locate the hottest and coldest temperatures on a live screen, and the camera’s ability to blend a thermal image on top of a digital image for easy on-the-job decision making. The HeatSeeker® Thermal Imager’s easy set-up and operation make it a cost-effective tool for electrical service, industrial maintenance, building inspection and data centre evaluation.

Features:

• Blended thermal/digital image
• Picture-in-picture
• Hottest/coldest temperatures displayed instantly on live screen
• Mark images with text and voice annotation
• Sequence image recording up to every hour or by alarm settings
• Fully radiometric and temperature measurements can be made over entire image
• IP54 rated to resist dust and water
• Withstands a six foot (2m) drop
• Class II Laser
• Built-in LED illuminator
• High and low temperature alarms
• Adjustable emissivity for maximum accuracy
• Accuracy of +/- 2°C or ±2%
• Multilingual – Nine languages included
• Long battery life
• Tripod mountable
• Carrying case included
• ThermalVision™ PC software included
• Automatic report generator
• 2-year warranty

Specifications:

Temperature Range: 14°F to 482°F (-10°C to 250°C)
Temperature Accuracy: ±2°C or ±2% of reading
Emissivity Table: 0.2 to 1.0 (adjustable)
Cursors: Four-movable (with independent emissivity settings)
Image Storage (2 GB micro SD card): 2000 Images
Field of View: 10° x 15°
Thermal Sensitivity: < 0.08°C at 30°C
Focal Plane Array: 19,200 pixels (160 x 120)
Display: 3.5” LCD
Visible Light Camera Resolution: 2.0 Megapixels
Spectral Range: 8μm to 14μm
Image Control: Eight colour palettes (Ironbow, Rainbow, Isotherm, Hot Metal, High Contrast, Rainbow 16, Black Hot and White Hot)
Focus: Manual
Power: Field replaceable, rechargeable Li-ion battery (5 hours)

Insulation is subject to many effects which can cause it to fail, including mechanical damage, vibration, excessive heat or cold, dirt, oil, corrosive vapors, moisture or humidity. The IDEAL Digital Insulation Meter is the tool every professional needs to determine whether the insulation is performing at an effective and safe level. During installation or routine maintenance, the Digital Insulation Meter identifies capacitive, absorption and leakage current, helping to prevent problems before they result in injury or equipment failure.

Features:

• Test voltages at 50/100/250/500/1000V
• Automatic calculation of PI and DAR
• Auto sensing AC/DC voltage to 600V
• Low Pass Filter – filters out high frequency noise
• Earth-bond resistance
• Test inhibition if >30V
• Digital reading with analog arc
• Compare pass/fail mode
• Remote test probe
• Store/recall memory
• Auto discharge
• Auto power off
• Backlit display – auto sensing
• Low battery indication
• Carrying case included
• CAT IV – 600V
• 2-year warranty

The new feature-rich IDEAL TightSight® Clamp Meters are built to professional quality standards to withstand tough use in commercial and industrial settings. The High Frequency Rejection (HFR) feature measures accurately even in noisy electrical environments. For everything from load measurement to troubleshooting industrial motors and adjustable speed drives (ASDs), the new TightSight Clamps bring speed, accuracy, safety and ease-of-use together in one rugged meter line.

Features:

• TightSight® bottom display
• Tapered jaws with hook tip
• Measures AC/DC Current
• True RMS
• AC/DC Voltage
• Selectable audible and visual voltage alerts on AC/DC voltage functions
• Frequency via clamp head or test leads
• Resistance
• Capacitance
• High Frequency Rejection*
• Peak hold
• Max/min
• Data hold
• Audible continuity
• Selectable auto power off
• Backlit display
• Low Battery Indicator**
• Includes leads, alligator clips and case
• CAT IV – 600V rating
• CAT III – 1000V rating
• 2-year warranty

* High Frequency Rejection (HFR) and EMI shielding features provide accurate
voltage/frequency readings on non-sinusoidal wave forms, such as adjustable speed drives.
** Low Battery Indicator – The low battery symbol will appear and indicate approximately
one hour of operation remaining before the unit displays “bAtt” and shuts off to prevent
inaccurate readings.

The new feature-rich IDEAL TightSight® Clamp Meters are built to professional quality standards to withstand tough use in commercial and industrial settings. The High Frequency Rejection (HFR) feature measures accurately even in noisy electrical environments. For everything from load measurement to troubleshooting industrial motors and adjustable speed drives (ASDs), the new TightSight Clamps bring speed, accuracy, safety and ease-of-use together in one rugged meter line.

Features:

• TightSight® bottom display
• Tapered jaws with hook tip
• Measures AC Current
• True RMS
• AC/DC Voltage
• Selectable audible and visual voltage alerts on AC/DC voltage functions
• Frequency via clamp head or test leads
• Resistance
• Capacitance
• High Frequency Rejection*
• Peak hold
• Max/min
• Data hold
• Audible continuity
• Selectable auto power off
• Backlit display
• Low Battery Indicator**
• Includes leads, alligator clips and case
• CAT IV – 600V rating
• CAT III – 1000V rating
• 2-year warranty

* High Frequency Rejection (HFR) and EMI shielding features provide accurate
voltage/frequency readings on non-sinusoidal wave forms, such as adjustable speed drives.
** Low Battery Indicator – The low battery symbol will appear and indicate approximately
one hour of operation remaining before the unit displays “bAtt” and shuts off to prevent
inaccurate readings.

The new feature-rich IDEAL TightSight® Clamp Meters are built to professional quality standards to withstand tough use in commercial and industrial settings. The High Frequency Rejection (HFR) feature measures accurately even in noisy electrical environments. For everything from load measurement to troubleshooting industrial motors and adjustable speed drives (ASDs), the new TightSight Clamps bring speed, accuracy, safety and ease-of-use together in one rugged meter line.

Features:

• TightSight® bottom display
• Tapered jaws with hook tip
• Measures AC Current
• True RMS
• AC/DC Voltage
• Selectable audible and visual voltage alerts on AC/DC voltage functions
• Frequency via clamp head or test leads
• Resistance
• Capacitance
• High Frequency Rejection*
• Peak hold
• Max/min
• Data hold
• Audible continuity
• Selectable auto power off
• Backlit display
• Low Battery Indicator**
• Includes leads, alligator clips and case
• CAT IV – 600V rating
• CAT III – 1000V rating
• 2-year warranty

* High Frequency Rejection (HFR) and EMI shielding features provide accurate
voltage/frequency readings on non-sinusoidal wave forms, such as adjustable speed drives.
** Low Battery Indicator – The low battery symbol will appear and indicate approximately
one hour of operation remaining before the unit displays “bAtt” and shuts off to prevent
inaccurate readings.

The IDEAL Infrared (IR) Thermometer is the non-contact way to make safe and quick temperature checks on mechanical equipment, electrical circuits and building systems while in operation. Regular monitoring of heat (infrared energy) emitted from surfaces can prevent potential problems and failures.

Features:

• Point-and-shoot temperature measurements
• Measurement range of -76 to 932° F (-60 to 500° C)
• Holds and displays the maximum temperature measured
• Laser pointer indicates centre of measurement area
• Distance to spot ratio of 12:1
• Maximum, Minimum, Difference (Δ) and Average temperature displays
• Lock mode for continuous measuring
• Programmable High Alarm and Low Alarm settings with audible warning
• Supports K-type thermocouple (not included)
• Adjustable emissivity for highest accuracy
• Backlit display
• Carrying case included
• 2-year warranty

The 490 Series multimeters are packed with features for commercial and industrial environments. From the technical advantages of auto/manual ranging and True RMS measurements to the user-friendly benefits of auto backlight and dual display, these meters are as easy to use as they are to own.

Features:

• True RMS readings for error-free testing
• Auto AC/DC voltage and current mode with frequency indication
• Auto selection for resistance/continuity/diode/capacitance
• All-weather housing designed for harsh environments
• Large, easy-to-read LCD display

• Data acquisition
• Data logging (20,000 Records)
• Data storage
• High voltage indicator
• Frequency
• Temperature
• High frequency rejection mode*
• Auto hold
• Peak hold
• dBm/dB measurement
• Relative mode
• Auto Selection for Resistance/Diode/Capacitance
• Duty factor
• Auto power off
• Auto sensing backlight
• Low battery indication
• USB intertace with software included
• 2-year warranty

*High frequency rejection (HFR) provides accurate voltage/frequency readings on non-sinusoidal wave forms, such as adjustable speed motor drives.

The 490 Series multimeters are packed with features for commercial and industrial environments. From the technical advantages of auto/manual ranging and True RMS measurements to the user-friendly benefits of auto backlight and dual display, these meters are as easy to use as they are to own.

Features:

• True RMS readings for error-free testing
• Auto AC/DC voltage and current mode with frequency indication
• Auto selection for resistance/continuity/diode/capacitance
• All-weather housing designed for harsh environments
• Large, easy-to-read LCD display

• Data acquisition
• Data logging (20,000 Records)
• Data storage
• High voltage indicator
• Frequency
• Temperature
• High frequency rejection mode*
• Auto hold
• Peak hold
• dBm/dB measurement
• Relative mode
• Auto Selection for Resistance/Diode/Capacitance
• Duty factor
• Auto power off
• Auto sensing backlight
• Low battery indication
• USB intertace with software included
• 2-year warranty

*High frequency rejection (HFR) provides accurate voltage/frequency readings on non-sinusoidal wave forms, such as adjustable speed motor drives.

Features:

• 100X magnification for viewing multimode connectors
• Includes 2.5mm connector “Universal Adapter” for FC, ST and SC style connectors
• Oblique illumination provides excellent view of ferrule cleanliness and core condition
• Rugged, rubberized metal housing, precision glass optics and a built-in laser safety filter
• White LED illumination delivers 100,000 hours bulb life
• Soft padded carrying case included
• Battery life 48+ hours
• Compact size 7.5” x 1.96” x 1.18”
• Optional 200X Conversion Eyepiece threads on for viewing finish/polish of singlemode connectors

Features:

• Self-adjusting stripping blades automatically select proper position
• Strips 12 AWG solid to 14 AWG Underground Feeder (UF) Cable
• Strips Twin and Earth cable
• Open-throat construction allows unlimited strip length
• Neatly removes outer cable sheath and then inner wire sheathing to desired lenghts
• Lighweight, ergonomic design reduces user fatigue
• Replaceable blades

Features:

• Rips ROMEX® outer jacket cleanly and quickly.
• Clips outer sheathing to remove excess ROMEX® jacket.
• Strips inner conduit wires.
• Looping holes loop wire for screw-on connections.
• Twist-Assist™ tightens most popular sizes of winged twist-on wire connectors.
• Injection molded elastomer grip provides a comfortable, slip resistant grip.
• Strip length measuring scale allows for quick and easy measurements.
• Conveniently fits in your pocket.

Features:

• Infinitely adjustable from 2 1/2" to 7"
• Cuts drywall and ceiling tile only
• Self-sharpening carbide coated stainless steel blades
• Includes 2 dust shields for minimizing mess
• Competitively priced
• Drill not included

Features:

• Includes hole saws and arbors for electrical sizes for pipe and conduit through 2 in.
• 8-piece kit
• Durable plastic carrying case
• Hole saw sizes (inches) 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2
• Includes arbors 35-393 and 35-394

Features:

• Extremely versatile: fits almost any drill (12V minimum)
• Cuts up to 750 MCM hard drawn copper, 1000 MCM aluminum
• Heavy-duty gears and specially hardened blades for professional quality
• Rounded blade design minimizes cable distortion during cutting
• No need to mess with battery packs or special chargers, this tool works with the drill you already carry

Drill not included.

Features:

• Designed to cut 750 KCMIL and smaller hard-drawn copper and aluminum cables
• Hardened steel blades for durability
• Rounded blade design minimizes cable distortion
• Quick release mechanism for blade back-out
• Locking mechanism keeps handles closed for storage

For use with LanTEK® II Series Cable Certifier.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Three types of FiberTEK FDX are available to suit every installation. Multi-mode (850/1300nm) kits are available with either LED light sources for 10/100/1000Mbps certification, or VSCEL/laser sources with high dynamic range for certification of links greater than 2kM in length. Single mode (1310/1550nm) kits feature laser sources as well. Combination multi-mode and single mode kits are available to further increase the FiberTEK FDX value.

Features:

• The only solution that completely eliminates the need to swap fibers or modules, allowing complete one-step certification of horizontal and backbone cabling.
• More than 2x as fast as any other fiber certification tester
• Complies to TIA/ISO/IEC certification standards
• Available with both LED and VCSEL/laser multimode sources
• Real-time power meter to aid in troubleshooting active equipment
• Field changeable adapters (SC, ST, FC) eliminate the need to carry multiple hybrid launch cords

What's included:

2 FiberTEK® FDX Modules
Lockable semi rigid carry case
SC, FC, ST adaptors for modules (2 each)
SC-SC Patch Cords compliant to ISO/IEC 14763-3 Standard
Quick Reference Guide
Electronic operations manual

For use with LanTEK® II Series Cable Certifier.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Three types of FiberTEK FDX are available to suit every installation. Multi-mode (850/1300nm) kits are available with either LED light sources for 10/100/1000Mbps certification, or VSCEL/laser sources with high dynamic range for certification of links greater than 2kM in length. Single mode (1310/1550nm) kits feature laser sources as well. Combination multi-mode and single mode kits are available to further increase the FiberTEK FDX value.

Features:

• The only solution that completely eliminates the need to swap fibers or modules, allowing complete one-step certification of horizontal and backbone cabling.
• More than 2x as fast as any other fiber certification tester
• Complies to TIA/ISO/IEC certification standards
• Available with both LED and VCSEL/laser multimode sources
• Real-time power meter to aid in troubleshooting active equipment
• Field changeable adapters (SC, ST, FC) eliminate the need to carry multiple hybrid launch cords

What's included:

2 FiberTEK® FDX Modules
Lockable semi rigid carry case
SC, FC, ST adaptors for modules (2 each)
SC-SC Patch Cords compliant to ISO/IEC 14763-3 Standard
Quick Reference Guide
Electronic operations manual

For use with LanTEK® II Series Cable Certifier.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Three types of FiberTEK FDX are available to suit every installation. Multi-mode (850/1300nm) kits are available with either LED light sources for 10/100/1000Mbps certification, or VSCEL/laser sources with high dynamic range for certification of links greater than 2kM in length. Single mode (1310/1550nm) kits feature laser sources as well. Combination multi-mode and single mode kits are available to further increase the FiberTEK FDX value.

Features:

• The only solution that completely eliminates the need to swap fibers or modules, allowing complete one-step certification of horizontal and backbone cabling.
• More than 2x as fast as any other fiber certification tester
• Complies to TIA/ISO/IEC certification standards
• Available with both LED and VCSEL/laser multimode sources
• Real-time power meter to aid in troubleshooting active equipment
• Field changeable adapters (SC, ST, FC) eliminate the need to carry multiple hybrid launch cords

What's included:

2 FiberTEK® FDX Modules
Lockable semi rigid carry case
SC, FC, ST adaptors for modules (2 each)
SC-SC Patch Cords compliant to ISO/IEC 14763-3 Standard
Quick Reference Guide
Electronic operations manual

For use with LanTEK® II Series Cable Certifier.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Three types of FiberTEK FDX are available to suit every installation. Multi-mode (850/1300nm) kits are available with either LED light sources for 10/100/1000Mbps certification, or VSCEL/laser sources with high dynamic range for certification of links greater than 2kM in length. Single mode (1310/1550nm) kits feature laser sources as well. Combination multi-mode and single mode kits are available to further increase the FiberTEK FDX value.

Features:

• The only solution that completely eliminates the need to swap fibers or modules, allowing complete one-step certification of horizontal and backbone cabling.
• More than 2x as fast as any other fiber certification tester
• Complies to TIA/ISO/IEC certification standards
• Available with both LED and VCSEL/laser multimode sources
• Real-time power meter to aid in troubleshooting active equipment
• Field changeable adapters (SC, ST, FC) eliminate the need to carry multiple hybrid launch cords

What's included:

2 FiberTEK® FDX Modules
Lockable semi rigid carry case
SC, FC, ST adaptors for modules (2 each)
SC-SC Patch Cords compliant to ISO/IEC 14763-3 Standard
Quick Reference Guide
Electronic operations manual

For use with LanTEK® II Series Cable Certifier.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Three types of FiberTEK FDX are available to suit every installation. Multi-mode (850/1300nm) kits are available with either LED light sources for 10/100/1000Mbps certification, or VSCEL/laser sources with high dynamic range for certification of links greater than 2kM in length. Single mode (1310/1550nm) kits feature laser sources as well. Combination multi-mode and single mode kits are available to further increase the FiberTEK FDX value.

Features:

• The only solution that completely eliminates the need to swap fibers or modules, allowing complete one-step certification of horizontal and backbone cabling.
• More than 2x as fast as any other fiber certification tester
• Complies to TIA/ISO/IEC certification standards
• Available with both LED and VCSEL/laser multimode sources
• Real-time power meter to aid in troubleshooting active equipment
• Field changeable adapters (SC, ST, FC) eliminate the need to carry multiple hybrid launch cords

What's included:

2 FiberTEK® FDX Modules
Lockable semi rigid carry case
SC, FC, ST adaptors for modules (2 each)
SC-SC Patch Cords compliant to ISO/IEC 14763-3 Standard
Quick Reference Guide
Electronic operations manual

Superior performance, revolutionary fibre options and outstanding value makes LanTEK® II the ultimate cable certification platform. Choose from three models that provide the test capabilities you need today with cost-effective upgrades should these change tomorrow; choose from 350 MHz - Class E/Cat 6, 500 MHz - Class EA/Cat 6A or 1000 MHz - Class FA/Cat 7A all with accuracy verified by ETL. Productivity on the job is assured by 11-second Class D/Cat 5e and a 14-second Class E/Cat 6 autotest times that include full graphical data storage. Certification costs and efficiency are further improved by a patented universal adapter system that lets you certify most cabling with off-the-shelf patch cords. This unique feature eliminates the need for proprietary permanent link adapters.

The LanTEK® II series also offers ultimate versatility with options for Alien Crosstalk testing, certification of TERA, GG45 and EC7 Class F/FA / Category 7/7A, plus M12 Industrial Ethernet, and coaxial test adapters. The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fibre certification for multimode, singlemode and Gigabit applications that’s 3 times faster than existing testers.

The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fibre certification for multimode, singlemode and Gigabit applications that’s 3 times faster than existing testers.

Superior price/performance

Models ranging from 350 MHz to 1000MHz available for ISO Class E/Category 6 through ISO Class FA/ Category 7A certification

High speed testing saves time and money

Largest internal memory capacity of any cable certifier

Store over 1,700 ISO Class E/ Category 6 tests with graphs

Patented test method

Provides lower cost of ownership by eliminating expensive permanent link adapters

Exceptionally fast fibre testing with FiberTEK® FDX

The world’s first dual wavelength, bidirectional fibre certification option

Large, ultra-bright display

11 cm widescreen display with white LED backlighting provides easy viewing of high-frequency data plots

Futureproof your investment

350 MHz & 500 MHz models are fully upgradeable to 1000 MHz

Smart lithium-ion battery technology

Exceptional 18 hour battery life with accurate, self calibrating charge indicator

Superior performance, revolutionary fibre options and outstanding value makes LanTEK® II the ultimate cable certification platform. Choose from three models that provide the test capabilities you need today with cost-effective upgrades should these change tomorrow; choose from 350 MHz - Class E/Cat 6, 500 MHz - Class EA/Cat 6A or 1000 MHz - Class FA/Cat 7A all with accuracy verified by ETL. Productivity on the job is assured by 11-second Class D/Cat 5e and a 14-second Class E/Cat 6 autotest times that include full graphical data storage. Certification costs and efficiency are further improved by a patented universal adapter system that lets you certify most cabling with off-the-shelf patch cords. This unique feature eliminates the need for proprietary permanent link adapters.

The LanTEK® II series also offers ultimate versatility with options for Alien Crosstalk testing, certification of TERA, GG45 and EC7 Class F/FA / Category 7/7A, plus M12 Industrial Ethernet, and coaxial test adapters. The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fibre certification for multimode, singlemode and Gigabit applications that’s 3 times faster than existing testers.

The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fibre certification for multimode, singlemode and Gigabit applications that’s 3 times faster than existing testers.

Superior price/performance

Models ranging from 350 MHz to 1000MHz available for ISO Class E/Category 6 through ISO Class FA/ Category 7A certification

High speed testing saves time and money

Largest internal memory capacity of any cable certifier

Store over 1,700 ISO Class E/ Category 6 tests with graphs

Patented test method

Provides lower cost of ownership by eliminating expensive permanent link adapters

Exceptionally fast fibre testing with FiberTEK® FDX

The world’s first dual wavelength, bidirectional fibre certification option

Large, ultra-bright display

11 cm widescreen display with white LED backlighting provides easy viewing of high-frequency data plots

Futureproof your investment

350 MHz & 500 MHz models are fully upgradeable to 1000 MHz

Smart lithium-ion battery technology

Exceptional 18 hour battery life with accurate, self calibrating charge indicator

Superior performance, revolutionary fibre options and outstanding value makes LanTEK® II the ultimate cable certification platform. Choose from three models that provide the test capabilities you need today with cost-effective upgrades should these change tomorrow; choose from 350 MHz - Class E/Cat 6, 500 MHz - Class EA/Cat 6A or 1000 MHz - Class FA/Cat 7A all with accuracy verified by ETL. Productivity on the job is assured by 11-second Class D/Cat 5e and a 14-second Class E/Cat 6 autotest times that include full graphical data storage. Certification costs and efficiency are further improved by a patented universal adapter system that lets you certify most cabling with off-the-shelf patch cords. This unique feature eliminates the need for proprietary permanent link adapters.

The LanTEK® II series also offers ultimate versatility with options for Alien Crosstalk testing, certification of TERA, GG45 and EC7 Class F/FA / Category 7/7A, plus M12 Industrial Ethernet, and coaxial test adapters. The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fibre certification for multimode, singlemode and Gigabit applications that’s 3 times faster than existing testers.

The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fibre certification for multimode, singlemode and Gigabit applications that’s 3 times faster than existing testers.

Superior price/performance

Models ranging from 350 MHz to 1000MHz available for ISO Class E/Category 6 through ISO Class FA/ Category 7A certification

High speed testing saves time and money

Largest internal memory capacity of any cable certifier

Store over 1,700 ISO Class E/ Category 6 tests with graphs

Patented test method

Provides lower cost of ownership by eliminating expensive permanent link adapters

Exceptionally fast fibre testing with FiberTEK® FDX

The world’s first dual wavelength, bidirectional fibre certification option

Large, ultra-bright display

11 cm widescreen display with white LED backlighting provides easy viewing of high-frequency data plots

Futureproof your investment

350 MHz & 500 MHz models are fully upgradeable to 1000 MHz

Smart lithium-ion battery technology

Exceptional 18 hour battery life with accurate, self calibrating charge indicator

The World’s First Fiber and Copper Gigabit Certifier

SIGNALTEK-FO is the first Certification tester that offers both copper and fiber optic testing on passive and active network links; and SIGNALTEK-FO does it for less than the price of an Optical Test Set alone.

SIGNALTEK-FO allows complete testing and documentation of cabling links to support Gigabit Ethernet and provides comprehensive diagnostic tests on active networks for additional diagnostics or troubleshooting. Unlike other Ethernet Certifiers, SIGNALTEK-FO can perform these task on copper & fiber networks.

Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance. SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Features:

Multimode and single mode capability
Available in 850nm and 1300nm wavelength configurations
Measure cable attenuation with a dynamic range of up to 20dB
Guarantee link operation at 1Gbps within IEEE error tolerances

Gigabit Certification and Active Network Diagnostics

Certify passive cabling to support Gigabit Ethernet and perform active network diagnostics such as DHCP, Ping and ARP (address resolution protocol) tests.

Multimedia Gigabit Certification to TIA & IEEE Standards (Certify copper, multi-mode and single mode fiber)

Certify to TIA 568-B interconnect and IEEE 802.3ab Gigabit performance standards

BERT and Optical Attenuation Measurements

Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links.

Dual Wavelength Capability

Available in both 850nm and 1300nm wavelengths to support virtually all LAN and campus fiber applications.

Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.

Storage and Reporting for Thousands of Reports

Store and print Certification reports for copper and fiber jobs using internal memory or USB “thumb-drives”.

What's included:

1 SIGNALTEK fiber ready near-end and 1 remote-end handset
Carrying case
Copper cable accessory kit with interfaces to RJ45, RJ11,
Coax F-Type cables, and alligator clips
Fiber optic cable accessory kit: 2 duplex LC-SC 50/125μμm (2m/7ft)
cables, 2 duplex LC-SC 62.5/125μμm (2m/7ft) cables, 1 duplex
SC-SC adapter.
8 AA alkaline batteries
2 AC power adapters with international plugs
USB interface cable
1 CD-ROM User Manual
1 Training DVD

The World’s First Fiber and Copper Gigabit Certifier

SIGNALTEK-FO is the first Certification tester that offers both copper and fiber optic testing on passive and active network links; and SIGNALTEK-FO does it for less than the price of an Optical Test Set alone.

SIGNALTEK-FO allows complete testing and documentation of cabling links to support Gigabit Ethernet and provides comprehensive diagnostic tests on active networks for additional diagnostics or troubleshooting. Unlike other Ethernet Certifiers, SIGNALTEK-FO can perform these task on copper & fiber networks.

Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance. SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Features:

• Multimode and single mode capability
• Available in 850nm and 1300nm wavelength configurations
• Measure cable attenuation with a dynamic range of up to 20dB
• Guarantee link operation at 1Gbps within IEEE error tolerances

Gigabit Certification and Active Network Diagnostics

Certify passive cabling to support Gigabit Ethernet and perform active network diagnostics such as DHCP, Ping and ARP (address resolution protocol) tests.

Multimedia Gigabit Certification to TIA & IEEE Standards (Certify copper, multi-mode and single mode fiber)

Certify to TIA 568-B interconnect and IEEE 802.3ab Gigabit performance standards

BERT and Optical Attenuation Measurements

Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links.

Dual Wavelength Capability

Available in both 850nm and 1300nm wavelengths to support virtually all LAN and campus fiber applications.

Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.

Storage and Reporting for Thousands of Reports

Store and print Certification reports for copper and fiber jobs using internal memory or USB “thumb-drives”.

What's included:

1 SIGNALTEK fiber ready near-end and 1 remote-end handset
Carrying case
Copper cable accessory kit with interfaces to RJ45, RJ11,
Coax F-Type cables, and alligator clips
Fiber optic cable accessory kit: 2 duplex LC-SC 50/125μμm (2m/7ft)
cables, 2 duplex LC-SC 62.5/125μμm (2m/7ft) cables, 1 duplex
SC-SC adapter.
8 AA alkaline batteries
2 AC power adapters with international plugs
USB interface cable
1 CD-ROM User Manual
1 Training DVD
2x 850nm SPF Modules
2x 13X0 SPF Modules

The World’s First Fiber and Copper Gigabit Certifier

SIGNALTEK-FO is the first Certification tester that offers both copper and fiber optic testing on passive and active network links; and SIGNALTEK-FO does it for less than the price of an Optical Test Set alone.

SIGNALTEK-FO allows complete testing and documentation of cabling links to support Gigabit Ethernet and provides comprehensive diagnostic tests on active networks for additional diagnostics or troubleshooting. Unlike other Ethernet Certifiers, SIGNALTEK-FO can perform these task on copper & fiber networks.

Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance. SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Features:

• Multimode and single mode capability
• Available in 850nm and 1300nm wavelength configurations
• Measure cable attenuation with a dynamic range of up to 20dB
• Guarantee link operation at 1Gbps within IEEE error tolerances

Gigabit Certification and Active Network Diagnostics

Certify passive cabling to support Gigabit Ethernet and perform active network diagnostics such as DHCP, Ping and ARP (address resolution protocol) tests.

Multimedia Gigabit Certification to TIA & IEEE Standards (Certify copper, multi-mode and single mode fiber)

Certify to TIA 568-B interconnect and IEEE 802.3ab Gigabit performance standards

BERT and Optical Attenuation Measurements

Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links.

Dual Wavelength Capability

Available in both 850nm and 1300nm wavelengths to support virtually all LAN and campus fiber applications.

Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.

Storage and Reporting for Thousands of Reports

Store and print Certification reports for copper and fiber jobs using internal memory or USB “thumb-drives”.

What's included:

1 SIGNALTEK fiber ready near-end and 1 remote-end handset
Carrying case
Copper cable accessory kit with interfaces to RJ45, RJ11,
Coax F-Type cables, and alligator clips
Fiber optic cable accessory kit: 2 duplex LC-SC 50/125μμm (2m/7ft)
cables, 2 duplex LC-SC 62.5/125μμm (2m/7ft) cables, 1 duplex
SC-SC adapter.
8 AA alkaline batteries
2 AC power adapters with international plugs
USB interface cable
1 CD-ROM User Manual
1 Training DVD
2x 13X0 SPF Modules

The World’s First Fiber and Copper Gigabit Certifier

SIGNALTEK-FO is the first Certification tester that offers both copper and fiber optic testing on passive and active network links; and SIGNALTEK-FO does it for less than the price of an Optical Test Set alone.

SIGNALTEK-FO allows complete testing and documentation of cabling links to support Gigabit Ethernet and provides comprehensive diagnostic tests on active networks for additional diagnostics or troubleshooting. Unlike other Ethernet Certifiers, SIGNALTEK-FO can perform these task on copper & fiber networks.

Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance. SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Features:

• Multimode and single mode capability
• Available in 850nm and 1300nm wavelength configurations
• Measure cable attenuation with a dynamic range of up to 20dB
• Guarantee link operation at 1Gbps within IEEE error tolerances

Gigabit Certification and Active Network Diagnostics

Certify passive cabling to support Gigabit Ethernet and perform active network diagnostics such as DHCP, Ping and ARP (address resolution protocol) tests.

Multimedia Gigabit Certification to TIA & IEEE Standards (Certify copper, multi-mode and single mode fiber)

Certify to TIA 568-B interconnect and IEEE 802.3ab Gigabit performance standards

BERT and Optical Attenuation Measurements

Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links.

Dual Wavelength Capability

Available in both 850nm and 1300nm wavelengths to support virtually all LAN and campus fiber applications.

Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.

Storage and Reporting for Thousands of Reports

Store and print Certification reports for copper and fiber jobs using internal memory or USB “thumb-drives”.

What's included:

1 SIGNALTEK fiber ready near-end and 1 remote-end handset
Carrying case
Copper cable accessory kit with interfaces to RJ45, RJ11,
Coax F-Type cables, and alligator clips
Fiber optic cable accessory kit: 2 duplex LC-SC 50/125μμm (2m/7ft)
cables, 2 duplex LC-SC 62.5/125μμm (2m/7ft) cables, 1 duplex
SC-SC adapter.
8 AA alkaline batteries
2 AC power adapters with international plugs
USB interface cable
1 CD-ROM User Manual
1 Training DVD
2x 850nm SPF Modules

SIGNALTEK™ – High-Performance Gigabit Ethernet Testing

SIGNALTEK™ is the most cost-effective Gigabit Ethernet cable performance tester in the world. It tests the link’s ability to support applications by transmitting Ethernet packets on the link and measuring performance according to the IEEE 802.3ab Gigabit Ethernet standard, the ultimate performance indicator for any network.

Features:

• Full IEEE 802.3ab compliant Gigabit Ethernet testing
• BERT testing for VoIP, data, and video-over-IP applications
• Supports DHCP and IP Ping
• Comprehensive wire-mapping capabilities including TDR
• Customisable test reports
• Intuitive graphical user interface
• Expandable data storage
• Can be upgraded to fiber optic version by IDEAL service center

What's included:

• 1 SIGNALTEK™ near-end and 1 remote-end handset
• Carrying case
• Copper cable accessory kit with interfaces to RJ-45, RJ11, Coax F-Type, and alligator clips.
• 8 AA alkaline batteries
• USB cable
• 2 AC power adapters with international plugs
• CD-ROM User Manual
• Training DVD

FiberMASTER provides all the features professionals require to certify and troubleshoot any type of fibre optic cabling. Measure fibre optic power in milliwatts (mW) and decibel-milliwatts (dBm) to test and troubleshoot active LANs. Quickly measure cabling loss with the automatic calibration feature that stores reference power from any light source for quick dB loss calculations. Plus, the 1490nm wavelength measurement mode is perfect for troubleshooting emerging Fibre To The Home cabling systems.

• Instantly displays direct power measurement when connecting the power meter to the output of a fibre optic device by determining whether the device is operating within its specifications.
• dB calibration feature enabling you to store a reference value and thereby allowing you to directly read the loss of the link without having to calculate the value.
• Unique form factor for easy storage of the light source allowing full operation of both light source and power meter.

Features:

Power Meter:

• 850, 1300/1310, 1490 and 1550 nm measurements
• Power measurement in dBm and mW, loss display in dB
• Auto Power Off
• Includes universal 2.5mm adaptor and fixed FC adaptor
• Operates on standard AAA batteries, (3)

Light Source:

• 850 /1300nm (LED) as well as 1310/1550nm (Laser)
• Includes ST, SC and FC adaptors
• Docks in the bottom of the power meter for easy storage
• Operates on standard AAA batteries, (3)
• Low battery indication

Accessories:

• 2x SC-SC 50um multimode cables
• 1x SC-SC 9um single mode cable
• 1 SC calibration coupler
• Carrying case
• User manual in English, Spanish, German, French, Portuguese, Italian and Chinese

For use with Ideal FiberMASTER™ MM/SM Fiber Optic Test Kits.

FiberMASTER provides all the features professionals require to certify and troubleshoot any type of fiber optic cabling.

Measure fibre optic power in milliwatts (mW) and decibel-milliwatts (dBm) to test and troubleshoot active LANs. Quickly measure cabling loss with the automatic calibration feature that stores reference power from any light source for quick dB loss calculations. Plus, the 1490nm wavelength measurement mode is perfect for troubleshooting emerging Fibre To The Home cabling systems.

Features:

Power Meter:

• 850, 1300/1310, 1490 and 1550 wavelength measurement capability
• Power measurement in dBm and mW
• loss display in dB
• Auto Power Off
• Includes universal adapter
• Operates on standard AAA batteries(3)

Light Source:

• 850 nm light source (33-928 kit)
• Includes ST, SC and FC adapters
• Power LED – lights green when light source is active
• Docks in the bottom of the power meter for easy storage
• Operates on standard AAA batteries, (3)
• Low battery indication

Accessories:

• 2x SC-SC 50um multimode cables
• 1 SC calibration coupler
• Carrying case
• English, Spanish, German, French, Portuguese,Italian and Chinese user’s manual

The IDEAL FiberMASTERTM fibre optic testing kit allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths.

Absolute power measurements are helpful when trouble shooting equipment that may not be operating properly. The dB calibration feature allows the operator to set a reference level to the light source and directly read the loss of fibre optic links without needing to manually calculate the values. The unique form factor allows the light source to be docked neatly within the power meter. This makes the kit compact for easy storage while still allowing full operation of both the source and meter.

Features:

• 850, 1300/1310, 1490 and 1550 wavelength measurement capability
• Power measurement in dBm and mW
• loss display in dB
• Auto Power Off
• Includes universal adapter
• Operates on standard AAA batteries, (3)

Lighter, More Compact Than Ever

Less than 170 grams. Lighter than a paperback, fits in your pocket.

Holds Up To 1,400 Books

Keep your library with you wherever you go.

Most Advanced E Ink Display

Kindle's high-contrast E Ink display delivers clear, crisp text and images.

Read in Bright Sunlight

Kindle's E Ink screen reads like real paper, with no glare. Read as easily in bright sunlight as in your living room.

One Month Battery Life

No battery anxiety - read for up to one month on a single charge.

Books in 60 seconds

Find a book and start reading in seconds with our fast, free wireless delivery.

Simple to Use

Kindle is ready to use right out of the box - no setup, no software to install, no computer required to download content.

Adjustable Text Sizes

Read comfortably with eight different sizes and three font styles.

Faster Page Turns

Kindle's powerful processor is tuned for fast, seamless page turns.

PDF and Personal Documents

Email personal documents and PDFs direct to your Kindle to read and annotate on-the-go. Massive Selection

Over 900,000 books, newspapers, and magazines, including latest bestsellers, Kindle exclusives and more.

Low Book Prices

We check hundreds of prices every day to make sure our prices are the lowest of any ebook store in the UK. Compare our book prices--you'll like what you find.

Free Books

More than one million free books, such as Pride and Prejudice and Treasure Island are available. Learn More

Free Book Samples

Download and read first chapters for free before you decide to buy.

Free Cloud Backup

We automatically back up your library in the cloud, so you never need to worry about losing your books. Re-download wirelessly anytime for free.

Buy Once, Read Everywhere

Kindle books can be read on your Kindle, iPhone, iPad, Android devices, Windows Phone 7, Mac, or PC with our free Kindle Reading Apps.

Built-in Dictionary with Instant Lookup

Seamlessly look up definitions of over 250,000 English words without interrupting your reading.

Whispersync

Our Whispersync technology synchronizes your last page read, bookmarks and annotations across your devices so you can always pick up where you left off.

Suitable for all Kane 455 Gas Analyser Kits.

The kit compises 3 probes with handle/hose assembly that are required for commissioning, servicing and installing new gas appliances.

• One specifically for Grills
• One ideal for Gas Fires
• One for General Purpose use
• The probes are interchangeable on the insulated handle and are designed to BS7697

SecuriTEST™ PRO is the most versatile all-in-one installation and troubleshooting tool for the CCTV professional.

CCTV installers often need to carry a variety of testing tools to complete their work. SecuriTEST™ PRO combines the most needed tools in one easy-to-carry package. Since all connections (video/communications/DMM) attach to a single unit, SecuriTEST™ PRO eliminates the need to juggle several devices while on a ladder or lift, making working conditions safer and increasing productivity.

SecuriTEST PRO offers a tester at a lower price point with all the key features installers need. The tester features video, sync and audio level testing as well as a high-capacity lithium ion battery in a package that´s smaller and lighter than SecuriTEST™. It also includes a colour monitor, PTZ controller with programming capability, protocol analyzer, pattern generator, DMM and UTP cable testing functions.

The SecuriTEST™ PRO has all the features and functionalities that CCTV technicians need to install, test and maintain analogue security camera systems. SecuriTEST™ PRO also includes a custom carrying case.

Features:

• Video Level and Sync Testing
• Audio Level Testing
• Lithium Polymer battery
• Test & Troubleshoot CCTV Cameras
• Access Camera Programming Menus with On Screen Display
• Supports over a Dozen PTZ Protocols
• Programmable Position Presets and Touring
• Integrated UTP Cable Tester
• Full Function Digital Multimeter
• Test Pattern Generator for Monitor Setup/Adjustment
• Now includes carry case

Kit comprising:

• Ideal 33-568 MultiMedia Cable Tester
• Ideal 62-164 Amplifier Probe

Designed to support a full range of Voice, Data and Video (VDV) applications.

The VDV MultiMedia Cable Tester is an easy to use cable testing and verification device that can quickly test all wiring requirements found throughout today's residential and commercial environments.

Voice - tests 3-pair USOC and 6 position RJ11/12 jacks for voice cable testing
Data - tests both shielded and unshielded cable according to T568A/B (RJ45)
Video - tests coax cable for opens and shorts with F-Connector interface

Instantly Verify Wiring Integrity

The VDV Multimedia Cable Tester makes it a snap to quickly verify wiring integrity and assure proper terminations for diverse types of networks.

Features:

Easy to use push button to select between Voice, Data and Video/Security testing functions
Tests for opens, shorts, miswires, reversals and split pairs
Indicates correct wiremap to T568A/B standards
Easy to read LCD display with 'PASS' or 'Miswire' indicator for each test
Identifies voltages on cables
Tone generator supports 4 different tones making fault isolation easier
Integrated remote unit to make storage and carrying easier
Can support additional remotes making it efficient for one person testing

What's included:

33-856 VDV MultiMedia Cable Tester, built in remote, satin RJ11 patchcord, satin RJ45 patchcord.

Designed to Support a Full Range of Voice, Data and Video (VDV) Applications

The VDV PRO Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout today’s residential and commercial environments.

Integrated RJ11/12 (voice), RJ45 (data) and coax F-connector (video) interfaces reducing the time needed when trasitioning between applications and eliminating the need for replacing lost adaptors.

Integrated tone generator with 4 unique analogue tones for constant locating and isolation of wire pairs in voice, data and video testing
Detachable remote with RJ11/12, RJ45 and Coax F-connector interfaces that stores securely in the base of the main unit making it easily available and ready for fast testing.

Voice:

• Tests 3-pair USOC and 6-position RJ-11/12 jacks for voice cable testing
• Will detect RJ-11 (1, 2 or 3 pair)
• Shows Normal or Reverse for pins 1 through 6

• Tests shielded or unshielded twisted pair cable to T568A/B (RJ45) standards
• Shows Pass or Miswire to indicate reversals, shorts, splits, breaks and opens
• Measures length of UTP, STP and coax cable and displays the distance to a specific fault in wiremap format
• Displays wiremap for 10BaseT and Token Ring when connected to its remote
• Blinks network link LED for visual tracing

Video:

• Tests coax cable for opens, shorts and length with F-connector interface
• Coax mapping with up to eight colour-coded coax remotes

What's included:

Carrying case, RCA and BNC adaptors used in cable, satellite and video surveillance systems, 1 remote & 1 probe (62-164).

Features:

• Kit of 8 Remotes for the IENet™ PRO

• Colour coded
• For use with VDV PRO Cable Tester Remotes
• Coax mapping with these up to eight colour coded coax remotes

Features:

• Eight remotes RJ-45, RJ-11 and Coax F-jacks increase testing capabilities of VDV PRO 33-770

IENet™ PRO - the choice for Industrial Ethernet cable testing

The tester features a unique easy-to-use cable test for 2 pair and 4 pair Industrial Ethernet cabling. With shielded 2 pair, M12 and RJ-45 ports, the IENet™ PRO is compatible with most Industrial Ethernet cabling. Test results are displayed in the PROFINET® Industrial Ethernet required format.

Instantly Verifies Wiring Integrity

With the IENet™ PRO Tester you can now quickly and easily verify wiring integrity and assure proper terminations for a diverse range of industrial cabling.

Features:

• Simple selection between Voice, 2 and 4 pair Data, and Coax testing functions (Voice and Video/Security tests via optional adaptors)
• Tests for opens, shorts, miswires, reversals, split pair (user selectable) and length
• Indicates correct wiremap to T568A/B standards for shielded and unshielded cabling
• Easy-to-read LCD display with “PASS” or “Miswire” indicator for each test
• Identifies presence of voltage on cables
• Tone generator supports four different tones making fault isolation easier
• Integrated remote unit to make storage and carrying easier
• Can support additional optional remotes making it efficient for one person testing
• Blinks network link LED for visual cable tracing
• Numerical indication for UTP “No Shield” and STP - “Shield” to comply with industrial ethernet PROFINET® requirements

IENet™ PRO - the choice for Industrial Ethernet cable testing

The tester features a unique easy-to-use cable test for 2 pair and 4 pair Industrial Ethernet cabling. With shielded 2 pair, M12 and RJ-45 ports, the IENet™ PRO is compatible with most Industrial Ethernet cabling. Test results are displayed in the PROFINET® Industrial Ethernet required format.

Instantly Verifies Wiring Integrity

With the IENet™ PRO Tester you can now quickly and easily verify wiring integrity and assure proper terminations for a diverse range of industrial cabling.

Features:

• Simple selection between Voice, 2 and 4 pair Data, and Coax testing functions (Voice and Video/Security tests via optional adaptors)
• Tests for opens, shorts, miswires, reversals, split pair (user selectable) and length
• Indicates correct wiremap to T568A/B standards for shielded and unshielded cabling
• Easy-to-read LCD display with “PASS” or “Miswire” indicator for each test
• Identifies presence of voltage on cables
• Tone generator supports four different tones making fault isolation easier
• Integrated remote unit to make storage and carrying easier
• Can support additional optional remotes making it efficient for one person testing
• Blinks network link LED for visual cable tracing
• Numerical indication for UTP “No Shield” and STP - “Shield” to comply with industrial ethernet
• PROFINET® requirements

Designed to Support a Full Range of Voice, Data and Video (VDV) Applications

The VDV PRO Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout today’s residential and commercial environments.

Integrated RJ11/12 (voice), RJ45 (data) and coax F-connector (video) interfaces reducing the time needed when trasitioning between applications and eliminating the need for replacing lost adaptors.

Integrated tone generator with 4 unique analogue tones for constant locating and isolation of wire pairs in voice, data and video testing
Detachable remote with RJ11/12, RJ45 and Coax F-connector interfaces that stores securely in the base of the main unit making it easily available and ready for fast testing.

Voice:

• Tests 3-pair USOC and 6-position RJ-11/12 jacks for voice cable testing
• Will detect RJ-11 (1, 2 or 3 pair)
• Shows Normal or Reverse for pins 1 through 6

Data:

• Tests shielded or unshielded twisted pair cable to T568A/B (RJ45) standards
• Shows Pass or Miswire to indicate reversals, shorts, splits, breaks and opens
• Measures length of UTP, STP and coax cable and displays the distance to a specific fault in wiremap format
• Displays wiremap for 10BaseT and Token Ring when connected to its remote
• Blinks network link LED for visual tracing

Video:

• Tests coax cable for opens, shorts and length with F-connector interface
• Coax mapping with up to eight colour-coded coax remotes

What's included:

Carrying case, RCA and BNC adaptors used in cable, satellite and video surveillance systems, 8 remotes & terminators.

Designed to Support a Full Range of Voice, Data and Video (VDV) Applications

The VDV PRO Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout today’s residential and commercial environments.

Integrated RJ11/12 (voice), RJ45 (data) and coax F-connector (video) interfaces reducing the time needed when trasitioning between applications and eliminating the need for replacing lost adaptors.

Integrated tone generator with 4 unique analogue tones for constant locating and isolation of wire pairs in voice, data and video testing
Detachable remote with RJ11/12, RJ45 and Coax F-connector interfaces that stores securely in the base of the main unit making it easily available and ready for fast testing.

Voice:

• Tests 3-pair USOC and 6-position RJ-11/12 jacks for voice cable testing
• Will detect RJ-11 (1, 2 or 3 pair)
• Shows Normal or Reverse for pins 1 through 6

Data:

• Tests shielded or unshielded twisted pair cable to T568A/B (RJ45) standards
• Shows Pass or Miswire to indicate reversals, shorts, splits, breaks and opens
• Measures length of UTP, STP and coax cable and displays the distance to a specific fault in wiremap format
• Displays wiremap for 10BaseT and Token Ring when connected to its remote
• Blinks network link LED for visual tracing

Video:

• Tests coax cable for opens, shorts and length with F-connector interface
• Coax mapping with up to eight colour-coded coax remotes

What's included:

Carrying case, RCA and BNC adaptors used in cable, satellite and video surveillance systems, 1 remote & 1 terminator.

Carbon monoxide (CO) is a colourless, odourless, tasteless, poisonous gas.
The Eikon CO is a tough and rugged fixed life personal Carbon Monoxide alarm, providing two years of maintenance free continuous monitoring.

Features:

• 0-500ppm measuring range
• Intrinsically safe with audible and visual alarms
• Cannot be turned off accidentally
• End of life indication
• Tap Tap test - assures user of correct operation
• Dust and water tight to IP65
• Cam grip pocket clip
• 1 year warranty

Building on the ideals and principles of the MI 3125 brings about the MI 3125B Eurotest COMBO. This marvelous unit contains all the standard tests of a normal multifunction tester with an array of extra features including 3-wire earth spike testing and the ability to download test results onto a computer.

Features:

• Automatic loop evaluation: built in loop impedance tables allow automatic evaluation of loop impedance compared to the regulations.
• B-type RCD testing: instrument can test AC sensitive RCD’s, pulsed DC sensitive RCD’s and DC sensitive RCDs.
• Downloadable: downloads via RS232 or USB cable directly to the PC via the software included with the unit.
• Help screens: unit comes complete with in-built help screens for referencing on site.
• Upgradeable: If changes occur to the regulations, changes can be made to the unit to keep the unit up to date.
• Earth spike testing: unit performs both 2 and 3 wire earth spike testing.
• Online Voltage Monitoring: Monitors all 3 voltages in real-time.
• Polarity swap: automatic polarity reversal on continuity test.
• Insulation: wide range of insulation test voltages from 50 V to 1000 V, reading up to 999 MΩ.
• TripLock function: Zs (RCD) function performs a loop test without tripping the RCD/RCBO.
• Built-in charger & rechargeable batteries: Unit has an in-built charging circuit and comes complete with a set of rechargeable NiMH batteries.
• RCD Auto: Automated RCD testing reduces circuit test time.
• Phase sequence test: required by BS7671:2008 17th Edition.

What's included:

• MI 3125B1 EurotestCOMBO
• A 1003 Mains plug
• A 1296 Test lead 3 x 1.5 m (brown, green, blue)
• A 1147 Rechargeable NiMH AA batteries (6 pcs)
• 83005447 12 V battery charging adapter
• 83005401 UK mains cable for charging adapter
• A 1015 Test probe (blue)
• A 1298 Test probe (brown)
• A 1062 Test probe (green)
• A 1310 Crocodile clip (blue)
• A 1297 Crocodile clip (brown)
• A 1062 Crocodile clip (green)
• A 1291 EuroLink PRO with USB cable and RS232 cable
• A 1303 Hand strap
• Short instruction manual
• Instruction manual on CD
• Calibration certificate

Each test kit is supplied in a highly durable purpose-made soft carrying case for protection and contains an insulation-continuity tester, loop impedance tester, RCD tester and all necessary test leads and accessories for testing at final circuits or at distribution boards.

What's included:

• KMP7036 Insulation-Continuity Tester
• KMP7021 Digital RCD Tester with Ramp Test
• KMP7030 Loop Impedance Tester
• KP1700 Soft Carrying Bag

For further information, please see the datasheets for each individual product above.

Each test kit is supplied in a highly durable purpose-made soft carrying case for protection and contains an insulation-continuity tester, loop impedance tester, RCD tester and all necessary test leads and accessories for testing at final circuits or at distribution boards.

What's included:

• KMP7036 Insulation-Continuity Tester
• KMP7020 Digital RCD Tester with Fast Trip
• KMP7030 Loop Impedance Tester
• KP1700 Soft Carrying Bag

For further information, please see the datasheets for each individual product above.

(Insulation / Continuity / Loop / RCD / Voltage)

Safety and performance are two most critical requirements for every electrical system. The quality of insulation, properly working grounding system and active protection are “must have” to assure safety of the people, electrical systems and buildings against electrocution, fire, and other equipment damage. They are critical to prevent loss of productivity due to power interruption. Robin-Amprobe KTS1625 is a multifunction installation tester measuring various parameters of the electrical system to provide complete safety analysis. It features loop impedance measurements as well as measurement of continuity and insulation resistance of motors, transformers or wires, testing of RCD systems, measuring voltage and frequency.

Features:

Insulation Function:

• Selectable test voltages 250V, 500V and 1000V

Continuity Function:

• Continuity test @ 200mA (short-circuit)

Line / Loop Impedance Functions:

• Non Trip Loop test
• Fast testing
• Prospective earth fault current
• Prospective short-circuit current

RCD Functions:

• Three levels of trip currents (X½, X1, X5) for complete range of testing applications
• Phase switch selection 0° and 180° for positive and negative semi-cycle testing
• RAMP slope measurement
• Tests time-delayed RCD’s (S-type)
• RCD Half-Wave test
• Auto RCD test

• Designed to allow testing to BS7671 IEE 17th Edition regulations
• Voltage and frequency measurements
• Instant correct wiring status check
• Dual measurement result display
• Large, backlit display
• Low battery indication
• Safety CAT III 300V

What's included:

Robin KTS1625 Digital Multifunction Tester, 3-Wires mains test cord set, test leads x 3, test probes x 3, alligator clips x 3, test probe with remote test button, batteries ( 8 x AA), users manual, strap and carrying case.

Properly working grounding system and active protection are a “must have” to assure safety of people, the electrical systems and buildings. Robin-Amprobe KMP7100 is a dual function installation tester designed to check if ground resistance and RCD provide sufficient protection.

Features:

Loop Functions:

• Non trip loop test on passive RCDs
• Fast testing
• 20, 200 & 2000Ω loop measurement ranges
• PSC measurement up to 20kA
• Displays mains voltage before test
• Instant correct wiring status check

RCD Functions:

• Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications
• Phase switch selection 0° and 180° for positive and negative semi-cycle testing
• RCD Half-Wave (DC) test.
• Auto RCD test
• Selectable 25V/50V fault voltage for RCD test

• Designed to allow testing to BS7671 IEE 17th Edition regulations
• Displays mains voltage before test
• “Test lock” for automatic start test when connected to circuit
• Dual measurement result display - primary display for RCD/Loop measurement, secondary display for circuit voltage
• Built-in Volt meter
• Large, backlit display
• Low battery indication
• Safety CAT III 300V

What's included:

Robin KMP7100 Dual Function Loop / RCD Tester, 3-wires mains test cord with UK plug, test leads x 3, test probes x 3, alligator clips x 3, batteries ( 8 x AA), users manual, strap and carrying case.

A residual-current device (RCD) disconnects a circuit whenever the electric current is not balanced between the energized and the neutral conductors. The imbalance indicates that there is a leakage current outside of the system sometimes caused by the person accidentally touching the energized part of the circuit, and sometimes by lack of sufficient insulation (excessive moisture or worn out, poor quality insulation materials). RCDs are designed to disconnect quickly to mitigate the harm caused by such shocks and to avoid current leaks which may lead to fire and other dangerous situations.

Robin-Amprobe RCD testers are simple to use devices designed to check for correct operation of RCD devices. They feature three levels of trip currents with either Fast Trip or Ramp Test for complete range of testing applications.

Features:

• Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications
• Ramp Test
• 3-LED proper connection indicator
• Phase switch selection 0° and 180° for positive and negative semi-cycle testing
• Designed to allow testing to BS7671 IEE 17th Edition regulations
• Large display
• Safety CAT III 300V

What's included:

Robin KMP7021 RCD Tester, 3-Wires mains test cord, test lead set with leads/probes/alligator clips, users manual, strap and carrying case.

A residual-current device (RCD) disconnects a circuit whenever the electric current is not balanced between the energized and the neutral conductors. The imbalance indicates that there is a leakage current outside of the system sometimes caused by the person accidentally touching the energized part of the circuit, and sometimes by lack of sufficient insulation (excessive moisture or worn out, poor quality insulation materials). RCDs are designed to disconnect quickly to mitigate the harm caused by such shocks and to avoid current leaks which may lead to fire and other dangerous situations.

Robin-Amprobe RCD testers are simple to use devices designed to check for correct operation of RCD devices. They feature three levels of trip currents with either Fast Trip or Ramp Test for complete range of testing applications.

Features:

• Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications
• Fast trip function
• 3-LED proper connection indicator
• Phase switch selection 0° and 180° for positive and negative semi-cycle testing
• Designed to allow testing to BS7671 IEE 17th Edition regulations
• Large display
• Safety CAT III 300V

What's included:

Robin KMP7020 Digital RCD Tester, 3-Wires mains test cord, test lead set with leads/probes/alligator clips, users manual, strap and carrying case.

The quality of insulation is critical to assure proper, uninterrupted and safe functioning of electrical circuits. The Robin-Amprobe Insulation-Continuity Tester is designed to diagnose and prevent the breakdown of the insulation in various parts of the electrical system such as wires, transformers and motors. The KMP7036 features three testing voltages covering wide range of commercial and residential applications.

Features:

Tests insulation of wires, cables, transformers and electrical motors
Selectable test voltages 250V, 500V and 1000V
Test button hold to perform the Dielectric Absorption Ratio Test
Continuity test @ 200mA short-circuit
Designed to allow testing to BS7671 IEE 17th Edition regulations
Built in voltmeter and red light warning for live circuit indication
Large, backlit display
Automatic discharge of test object after completion of measurement
Data Hold
Test lead resistance zero facility
Low battery indication
Safety CAT III 600V

What's included:

Robin KMP7036 Insulation-Continuity Tester, Test leads x 2, test probes x 2, alligator clips x 2, batteries ( 6 x AA), users manual, carrying case and strap

Loop testing is a quick, convenient, and highly specific method of evaluating an electrical circuit for its ability to engage protective devices (circuit breakers, fuses, RCD’s). A “loop” is defined by including unsuspected elements, where current has found parallel paths to ground. Because a ground loop determines the effectiveness of protective devices, it is crucial to be able to measure it, in order to detect and correct problems.

Features:

• Non trip loop test on passive RCDs
• Instant reading
• 20, 200 & 2000Ω loop measurement ranges
• PSC measurement up to 20kA
• Displays mains voltage before test
• Instant correct wiring status check
• Designed to allow testing to BS7671 IEE 17th Edition regulations
• Backlight display
• Low battery indication
• CAT III 300V

What's included:

Robin KMP7030 Loop Impedance Tester, mains test cord, test lead set with IEC connector, test probe set, alligtor clip set, batteries (8 x AA), user’s manual, strap and carrying case.

A properly functioning grounding system is a critical safety feature of an electrical system. It is used to mitigate the risk when exposed metal parts come in contact with dangerous voltages in the event an installation fails. The building structures are protected by grounding systems to divert energy of lightning strikes straight to ground. Connections to ground limit the build-up of static electricity when handling flammable products or when repairing electronic devices.

Robin-Amprobe Ground Resistance Testers are designed to measure resistance of the grounding systems to verify that the system has low enough resistance to provide protection for people, equipment and structures.

Features:

• Measures earth ground resistance - 3 point (fall of potential) or 2 point tests
• Voltage measurement prevents false measurements
• Test leads, auxiliary electrodes are included for a complete instrument
• Data hold
• Large, backlit display
• Built-in memory to store 20 measurements
• Designed to allow testing to BS7671 IEE 17th Edition regulations
• Low battery indication
• Safety CAT III 400V

What's included:

Robin KMP7010 Ground Resistance Tester, Test lead set for 3 point test , auxiliary ground rods, test lead set for 2 point test, batteries ( 6 x AA), users manual, strap and carrying case.

The APRV Anton pressure relief valve is designed to simplify let by & tightness testing by enabling the engineer to get the desired gas pressure on their U gauge / pressure meter without having to keep pulling off the hose and making repeated adjustments.

This time saving accessory simplifies the process, and is available from most good trade counters.

What's included:

• Simple thumb relief valve with 'o' ring seal
• 1 metre good quality pressure hose
• Push fit T piece, so hose length can easily be changed to suit

Power flushing has just got easier with the launch of Anton’s new Flowclean Plus, power flushing and descaling pump. As with all Anton products, the unit has been designed to provide simplification of use for the engineer, whilst providing some unique design features to help with van storage, transportation and performance.

Features:

• Easy to use with faceplate diagram to assist you.
• Simple and quick to connect to heating system.
• Handy carry case with shoulder strap to store hoses, funnel and a selection of fittings.
• Magnetic filter to remove black iron oxide particles and sludge during the power flushing process.

Specifications:

• Dimensions: W43 x D48 x H56 (cm)
• Weight: 18 kg with transport trolley
• Tank capacity: 37 litres
• Compatible with all approved chemicals
• Working fluid temperature up to 70ºC
• Efficient cleaning up to 20 radiators
• Flow rate: 5,400 ltrs/hr max
• 0.45 HP motor with IP54 protection
• Max working head: 2 bar
• Flow diverter valve for forward and reverse action
• Double dump facility

What's included:

Flowclean Plus pump with transport trolley Carry case with front pockets & shoulder strap Magnetic in-line filter (supameg compact) System connection fitting kit and chemical funnel Quick guide instructions Full instruction manual 2 x 3 metre flow & return hoses 2 x 3 metre dump & overflow hoses.

The Martindale FD600 fuse finder kit allows for tracing of fuses through mains sockets, light fittings and points in a circuit where there is no power socket available.

The transmitter is supplied with a mains plug and a set of two wire test leads, emitting a signal for the receiver to pick up. The receiver's adjustment wheel increases or decreases the sensitivity. This combination makes tracing fuses much easier, even on a crowded fuse board.

Specifications:

Transmitter

• Transmit Signal: approx 5Hz; 20A (max) pulse of 1.7µS width

General Specifications:

• Temperature Range: -10°C to 40°C at max 60% RH
• Earth Leakage: Nil
• Mains Supply: 230V, 30 - 70Hz
• Power Consumption: 1W approx
• Overvoltage: CAT III 300V
• Protection Class: IP20
• Dimensions: 65 x 65 x 46mm approx
• Weight: 60g
• Supplied with test leads, mini IEC mains lead, hard carry case & instruction manual

Receiver

• Tracing Depth: 0 - 10cm, for fuse assignment (depending on local conditions)
• Sensitivity Control: Rotary thumbwheel on the housing

General Specifications:

• Temperature Range: -10°C to 40°C at max 60% RH
• Protection Class: IP20
• Power Supply: 9V Battery (PP3 / MN1604) alkaline only
• Dimensions: 160 x 55 x 30mm
• Weight: 135g approx
• Units are EMC compliant

What's included:

The FD600 fuse finder is supplied in a hard carry case with a transmitter, mains plug, two wire test leads, receiver, batteries and instruction manual.

The Martindale SB13 is a simple way to test at socket outlets without the need to remove the socket from the wall. Commonly used for carrying out R1 / R2 tests, the SB13 features three standard 4mm banana sockets, making it universally compatible with most test leads.

Whilst stocks last! Simply purchase a qualifying Anton Gas Combustion Analyser from the below list from Test4Less, and you will receive a Free Socket & See Household Energy Meter and Voucher for half-priced first year Calibration at Test4Less!

For full details of the See & Save Household Energy Monitor, please click here.

Choosing Test4Less as your chosen supplier for your Calibration service means that you can be confident of a professional quality service of the highest quality. We are also one of only a few UK service centres approved by Anton so you can be rest assured that there is no better place to book in your Anton - Telegan Gas Combustion Analyser. So why not take advantage and save a bundle on Calibration costs at Test4Less?

Qualifying Anton Products:

• Anton Telegan Sprint V1 Kit Gas Analsyer
• Anton Telegan Sprint V2/LD Gas Analyser
• Anton Telegan Sprint V2 Gas Analyser
• Anton Telegan Sprint V2 Kit 1 Gas Analyser
• Anton Telegan Sprint V2 Kit 2 Gas Analyser
• Anton Telegan Sprint V2 Kit 3 Gas Analyser CPA1 Kit
• Anton Telegan Sprint V4 Gas Analyser
• Anton Telegan Sprint V4 Kit 1 Gas Analyser
• Anton Telegan Sprint V4 Kit 2 Gas Analyser
• Anton Telegan Sprint V5 Kit 2 Gas Analyser

Terms & Conditions:

Valid up to 13 Months after the purchase date stated on the voucher. To redeem, call Test4Less on 01782 567095 when the 12 Month Calibration is due. Offer only applies to the original Anton Combustion Analyser item and the original purchaser. Voucher code must be quoted when booking and voucher must be retained and returned with the product to be calibrated. Voucher has a cash value of 0.0001p. This offer is non transferrable. This voucher can only be redeemed once. Valid in the UK and Isle of Man only. Voucher remains the property of Test4Less which is a Trading Division of Acute Sales Ltd. Not valid with any other offer. For further information, contact Test4Less on 01782 567095.

A must have tool for everyday applications, The Amprobe IR-500 Infrared Thermometer verifies temperature as well as voltage presence and can be used as a flashlight.

Features:

• 8:1 distance to spot ratio
• IR temperature measurement (-10 °C …500 °C) 
• Built-in laser pointer
• Built-in LED flashlight
• Integrated non-contact AC voltage warning
• Holds temperature reading for 10 seconds
• Selectable °F / °C
• Pocket clip for easy carrying
• Pocket size IR thermometer

Specifications:

• Temperature Range: -20°F to 932°F (-30°C to 500°C)
• Accuracy at 23°C ±2°C <80﹪RH:

1. -20°F to 32°F (-30°C to 0°C): ±4°F (±2°C)
2. 34°F to 50°F (1°C to 10°C): ±3°F (±1.5°C)
3. 52°F to 104°F (11°C to 40°C): ±2°F (±1°C)
4. 106°F to 932°F (41°C to 500°C): ±3°F (±1.5°C) or ±1.5% of reading, whichever is greater.

• Best display Resolution: 0.5°F (0.2°C)
• Response Time: 0.5 s
• Wavelength: 6.5um to 18um
• Emissivity: E=0.95
• D:S: 8:1(calculated at 80% energy)
• Repeatability: ±1.8°F (±1°C) or ±0.5% of reading, whichever is greater.
• Display Hold: 10 s
• Non-Contact Voltage: 60VAC ~ 600VAC
• Power: 1.5V AAA alkaline battery
• Weight: Approx. 50g (0.11lb)
• Dimensions (HxWxD): 100 x 20 x 29mm (3.94 x 0.79 x 1.14in)
• Storage Temperature: -40°F to 140°F (-20°C to 60°C) (without battery)

What's included:

1.5V AAA alkaline battery (installed), users manual

Keep your T5 tester in top shape and maintain the integrity of your Fluke equipment with this replacement lead set.

• Replacement test lead set for T5-600 and T5-1000

Secure and store your cables and/or test leads with these handy Fluke branded hook-n-loop fasteners.

• 3 pcs. Hook-n-Loop fasteners for cables and leads

Enhance the usage of your Fluke fused test leads with this large alligator clip set. This accessory enables the use of AC285 alligator clips with FTP-1 fused probes.

Features:

• One pair (red, black) of large alligator clips AC285
• 4 adaptors for Fluke fused test probes
• Recommended for use with FTP-1 and FTPL-1
• CAT III 600 V, CAT IV 600 V, 10 A

TP175 is a modular adjustable length probe for use with most Fluke test lead sets that accept interchangeable probes and select Fluke mainframe units.

Features:

• Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
• New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
• Double insulated silicone leads. TP175 test leads withstand high temperatures and remain flexible in cold temperatures.
• Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.
• Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
• Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
• Probes always show correct category rating for tip being used
• Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)
• Conforms to EN61010-031
• Includes removable 4 mm lantern tips that thread onto the lead tip
• One-year warranty

Specifications:

• Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
• Exposed probe tip length: 19 mm to 4 mm (0.75 inch to 0.16 inch)
• Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)

Fluke TP175 is a modular adjustable length probe for use with most Fluke test lead sets that accept interchangeable probes and select Fluke mainframe units.

Features:

• Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
• New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
• Double insulated silicone leads. TP175 test leads withstand high temperatures and remain flexible in cold temperatures.
• Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.
• Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
• Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
• Probes always show correct category rating for tip being used
  Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)
• Conforms to EN61010-031
• One-year warranty

Specifications:

• Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
• Exposed probe tip length: 19 mm to 4 mm (0.75 inch to 0.16 inch)
• Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)

Monitor environmental build up of Carbon Dioxide (CO2) with this easy to use handheld instrument. Compliant with BS8494, the IAQ8494 offers the ability to review both ambient temperature as well as direct Carbon Dioxide (CO2) on a large, clear, backlit display.

Features:

• 0-9,999ppm CO2 NDIR sensor (anticipated 15 year life)
• Adjustable audible alarm
• Minimum/Maximum levels
• Time weighted averages
• Short time exposure limit
• Backlit for confined spaces
• Auto Power off
• Three year warranty

What's included:

• Anton IAQ8494 CO2 Air Quality Meter
• PC software (optional)
• Rugged blow moulded carry case

The ANT/CO/BS7967 appliance probe kit from Anton has been designed to sample combustion products to include cookers, grills and flueless appliances, as outlined in BS7967:2005 / CPA1 and can be used with most flue gas analysers on the market.

Features:

• Right- angled probe with 5 sampling holes
• Cooker probe with supporting discs
• 1 metre of black nitrile hose
• FIL29001 inline filter housing

The new Drummond MTL20 test lamp safe voltage indication from 50 - 500V AC / DC. In addition to the MTL10, the new model MTL20 incorporates two test buttons, one on the body of the unit and one on the probe. Simultaneous depression of both buttons enables the unit to draw a high current, allowing the user to differentiate between phantom voltages and hazardous persistent voltages. The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician's test lamp (GS38) as well as complying with BS EN 61243-3 and BS EN 61010, CAT III 1000V and CAT IV 600V.

A unique feature of this new Drummond test lamp are the four distinctive bands of illumination, with a 360° viewing angle, providing indication of voltages above 50, 100, 200 & 400 volts, even in bright sunlight. This allows for accurate identification of potentially lethal voltages at 50V and enables the user to distinguish between 110V, 230V and phase to phase voltages in a 3 phase system.

Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that might compromise the user's safety, and is resistant against heat and oil. To enable use in most circumstances, a right angled probe tip is suppled in addition to the two straight tips. For maximum ease of use the right angled probes can be rotated through 90, 180 and 270 degrees.

General Specifications:

• Temperature Range: -10°C to +55°C
• Measurement Category: CAT IV 600V, CAT III 1000V
• Pollution Degree: 2
• Protection Degree: IP64
• Dimensions: 213 x 112 x 72mm
• Weight: 350g approx

Specifications:

Maximum Working Voltage:

• 500V AC, 750V DC

Voltage Ranges:

• 50, 100, 200, 400V AC / DC

Range Detection:

• Automatic

Response Time:

• <0.1s

Frequency Range:

• DC, 0-65Hz

Test Current (500V AC / DC):

• Switches not Operated: <3.5mA
• Switches Depressed: 28mA @ 240V AC, 60mA @ 500V AC

The new Drummond MTL10 test lamp safe voltage indication from 50 - 500V AC / DC. The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician's test lamp (GS38) as well as complying with BS EN 61243-3 and BS EN 61010, CAT III 1000V and CAT IV 600V.

Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that might compromise the user's safety, and is resistant against heat and oil. To enable use in most circumstances, a right angled probe tip is suppled in addition to the two straight tips. For maximum ease of use the right angled probes can be rotated through 90, 180 and 270 degrees.

A unique feature of this new Drummond test lamp are the four distinctive bands of illumination, with a 360° viewing angle, providing indication of voltages above 50, 100, 200 & 400 volts, even in bright sunlight. This allows for accurate identification of potentially lethal voltages at 50V and enables the user to distinguish between 110V, 230V and phase to phase voltages in a 3 phase system.

General Specifications:

• Temperature Range: -10°C to +55°C
• Measurement Category: CAT IV 600V, CAT III 1000V
• Pollution Degree: 2
• Protection Degree: IP64
• Dimensions: 213 x 112 x 72mm
• Weight: 320g approx

Specifications:

Maximum Working Voltage:

• 500V AC, 750V DC

Voltage Ranges:

• 50, 100, 200, 400V AC / DC

Range Detection

• Automatic

Response Time

• <0.1s

Frequency Range

• DC, 0-65Hz

Test Current (500V AC / DC)

• <3.5mA

The Drummond MTL9C test lamp improves on the design of the MTL7, with the addition of a built-in continuity tester. This allows for quick checking of the test lamp circuit to show that neither the fuse or lamp has blown. In addition the continuity tester includes an LED to show voltage presence even if the bulb filament has blown.

Fully compliant with GS38, the MTL9C gives a clear, positive indication of the presence of voltage and is not sensitive to the presence of phantom voltages.

Features:

2 x HRC Fuses
Complies with GS38 & GS9/6
Double insulated, oil resistant and flame retardant cable wit hblack outer and white inner for easy detection of cuts and abrasions

The Drummond range of test lamps offer exceptional build quality and performance. The main body and probe incorporate larger finger guards for improved user safety. Housed in the tough moulded body is a 240V 15W special rough service filament lamp which is shielded by a translucent cover. An HRC fuse is incorporated within the body for electrical protection.

The Drummond MTL7 test lamp complies fully with GS38 and makes it ideal for simple voltage testing. The lamp gives a clear, positive indication of voltage presence and is not sensitive to the presence of phantom voltages.

Features:

• 2 x HRC Fuses
• Complies with GS38 & GS9/6
• Double insulated, oil resistant and flame retardant cable wit hblack outer and white inner for easy detection of cuts and abrasions

This combo kit pairs the new Fluke 117 DMM with a Fluke 322 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation.

Fluke 117 Multimeter:

Designed by electricians. Engineered by Fluke. The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job.

Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments.
And check out other members of the Fluke 110 family: Fluke 113 Utility Multimeter, the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter and the Fluke 116 HVAC Multimeter with Temperature and Microamps.

Features:

• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True-rms for accurate measurements on non-linear loads
• Measures 10 A (20 A overload for 30-seconds)
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™) for hands free operation
• CAT III 600 V safety rated

Fluke 322 Clamp Meter:

The Fluke 322 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The model also offers DC voltage measurements and has a higher resolution for loads below 40 A.

Features:

• New smaller size fits easily into tight places
• Precise measurements with 1.8% basic accuracy
• Resolution up to 0.01A and 0.1 V
• Measures AC current to 400 A
• Measures AC volts to 600 V
• Measures DC volts to 600 V (Fluke 322 only)
• Resistance measurement to 400 Ω
• Continuity for quick checking of shorts
• Automatic low battery indicator
• Display hold function
• Two year warranty

What's included:

Fluke 117 True-RMS digital multimeter with non-contact voltage detection
Fluke 322 Compact clamp meter
TPAK Magnetic Meter Hanging Strap
TL75 Hard Point test lead set
C115 Deluxe soft carrying case with shoulder strap

3 years warranty on Fluke 117 DMM, 2 years warranty on Fluke 322 Clamp meter and 1 year on accessories.

The low weight, small size, one-touch solution

The new Fluke 6200 and 6500 PAT testers have redefined auto test capabilities to help you increase the number of portable appliance tests performed per day. They’re designed to enable you to work faster without compromising safety – yours or your customer’s.

Low weight… Weighing approx. 3 kg, the 6200 and 6500 are lightweight and easy to carry around when working on-site. The hard carrying case (supplied) not only offers protection during transit but also includes extra storage space for accessories and other tools.

Small size… They’re also extremely compact, and have Fluke’s traditional ruggedness to be able to withstand working in the field. Packed with all the features you need for testing portable appliances, a Fluke PAT tester is a complete all-in-one solution.

One-touch solution… Pre-set test routines are initiated from a single button. This not only simplifies testing but also facilitates a faster, more efficient way of working. The fully automatic 6500 also includes user-definable test routines and a QWERTY keyboard for rapid data entry.

Features:

• Dedicated key for each test for ‘one-touch’ testing
• Pre-set pass/fail levels to save time
• Large backlit display for easy reading
• Single mains socket for appliance connection
• Separate IEC socket for easy mains/extension lead testing
• Detachable test leads for quick field replacement
• Integral carrying handle
• Integral QWERTY keyboard for rapid data entry
• Additional Compact Flash memory card capability for back-up data storage and transfer to PC
• Large backlit graphics display
• Pre-set, auto-test sequences for user convenience
• Integral site, location and description codes for faster data processing
• Memory review facility for more on-site control

Whats included:

Fluke 6500 Mainframe
EXTL100 Extension lead test adaptor
DMS 0702/PAT, APPLIANCE TESTER SOFTWARE
Pass560R Appliance pass labels
SPScan15 Barcode scanner
Appliance fail labels

The perfect test lead kit for today’s electronics test and design

What's included:

• Precision electronic probes with multiple spring-loaded sharp tips to maximize contact with SMD test points
• Micro-grabbers and leads to enable fine SMD test
• Mini-alligator clips, grabbers, and probes for virtually every electronics need

Kit includes all the SureGrip™ leads and probes in a handy 6-Pocket roll-up pouch: AC220 SureGrip™ Alligator Clip Set

What's included:

• AC280 SureGrip™ Hook Clip Set
• AC283 SureGrip™ Pincer Clip Set
• AC285 SureGrip™ Large Jaw Alligator Clip Set
• TP238 SureGrip™ Insulated Test Probe Set
• TL224 SureGrip™ Silicone Test Lead Set
• 6-Pocket Storage Pouch

In response to new ESA guidelines, Fluke introduces test probes with built-in fuses for additional measurement protection. And, if the probe fuse does blow, these probes will still allow the meter to indicate live voltage helping to prevent a possible misreading of no voltage present. The new modular FTP probes can mount onto any Fluke modular lead format. The FTPL set includes Fluke TL224 modular leads with the fused test probes. Rated to CAT III 1000 V, these probes also have removable sheathed tips for additional safety.

Features:

• Built-in fuses for additional measurement protection
• Probes allow indication of live voltage even with blown fuse, helping to prevent the user from thinking no voltage is present
• 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts and removable
• GS38 insulated IC caps for probing closely spaced leads
• Operating temperature – 20 °C to 50 °C (-5 °F to 120 °F)
• CAT III 1000 V, CAT IV 600 V, 10 A rating
• FTPL Fused Test Probe and Lead Set includes Fluke TL224 test leads

Specifications:

• Probes allow indication of live voltage even with blown fuse for added security*
• Built-in 1000 V, 11 A fuses with 20 kA interrupt rating
• 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads
• Operating temperature -20 °C to 50 °C (-5 °F to 120 °F)
• CAT III 1000 V, CAT IV 600 V, 10 A rating, Pollution Degree 2
• Recommended for use with Fluke modular TL224 SureGrip™ silicone test leads and compatible with most modular test leads
• Replace fuse by unscrewing probe handle at finger guard. Use only Fluke fuse part number 803293.
• Current mode is non-functional with blown fuse
• FTPL Fused Test Probe and Lead Set includes Fluke TL224 test leads

* Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. See explanation below under “DMM Input Impedance.” Current mode is non-functional with blown fuse.

Handy all-in-one kit that includes:

• AC220 SureGrip™ Alligator Clip Set
• AC285 SureGrip™ Large Jaw Alligator Clip Set
• TP74 Lantern Tip Test Probes
• TL224 SureGrip™ Silicone Test Lead Set
• Large zippered soft case with moveable divider

Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized. This is called stray or ghost voltages and is caused by the capacity between wires. Because of the very high impedance input of the meter, this stray voltage has nowhere to go which will lead to an incorrect reading on the meter.

The solution is to make sure there is a lower impedance across the input terminals of the meter. However, this is not as easy as it seems since it is vital that the safety of the electrician is not compromised.

Features:

• Makes sure the meter has a low input impedance that eliminates stray voltages
• On energized wires, the meter will indicate the real voltage
• On non-energized circuits the meter will read close to zero (even if there are stray voltages)
• It can be used with all modern meters with standard input spacing.
• Rated CAT III 1000 V, CAT IV 600 V
• One year warranty

What's included:

• SV225 Stray Voltage Eliminator
• TL224 SureGrip™ Silicone Test Lead Set (right to straight)
• TP220 SureGrip™ Test Probe Set
• C75 Accessory Case

Features:

• One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm
• Extra hard probe tips to provide long service life
• Flexible silicone insulated test leads
• CAT III 300 V, 3 A rating, UL listed
• One year warranty

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Features:

• One pair (red, black) of silicone insulated leads with straight connectors on both ends
• Reinforced strain relief
• Includes one pair (red, black) of female couplers
• Extends test leads by 1.5 m
• 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed
• One year warranty

FLUKE DMS software - a complete solution

The FLUKE DMS (data management software) is an efficient software for data recording and administration of test results for electrical installation or portable appliance testing. Available is the software FLUKE DMS as the module DMS 0100/INS for the electrical installation testing and DMS 0702/PAT for the appliance testing. Equiped with interesting additional functions is the PROF-version, an ideal software for service providers or facility management. With the COMPL-version FLUKE offers the complete package for electrical installation and appliance testing. One software for FLUKE-1653, FLUKE 1654B and FLUKE-6500.

Features:

• Comfortable, extensible software for administration and reporting of appliance tests in compliances with DIN VDE 0701/0702, ÖVE E 8701
• Clear and logic hierarchy
• Easy to handle directory structure (customer, site, department, UUT, Test) is always visible
• Measurement data transfer from test instrument to PC
• New data records for UUT will be automatically created. Test results can be printed out quickly and easily
• Printing of test results of a test series as listing or test report for individual UUTs
• Export function for listings in text or Excel format
• Supports FLUKE 6500, 1653 & 1654B
• Administration of user authorisation for four different user groups
• Comparision and update of different DMS databases
• Printout of bar-coded test and appliance numbers via software interface to external software for barcode printing (e.g. Brother® P-Touch)
• Ideal software for service providers or facility management

FLUKE DMS software - a complete solution

The FLUKE DMS (data management software) is an efficient software for data recording and administration of test results for electrical installation or portable appliance testing. Available is the software FLUKE DMS as the module DMS 0100/INS for the electrical installation testing and DMS 0702/PAT for the appliance testing. Equiped with interesting additional functions is the PROF-version, an ideal software for service providers or facility management. With the COMPL-version FLUKE offers the complete package for electrical installation and appliance testing. One software for FLUKE-1653, FLUKE 1654B and FLUKE-6500.

Features:

• Comfortable, extensible software for administration and reporting of appliance tests in compliances with DIN VDE 0701/0702, ÖVE E 8701
• Clear and logic hierarchy
• Easy to handle directory structure (customer, site, department, UUT, Test) is always visible
• Measurement data transfer from test instrument to PC
• New data records for UUT will be automatically created. Test results can be printed out quickly and easily
• Printing of test results of a test series as listing or test report for individual UUTs
• Export function for listings in text or Excel format
• Supports FLUKE 6500, 1653 & 1654B

• Compact mini printer for immediate local printing of test data
• Connects to 6500 or 6200 PAT testers
• Lightweight and highly portable

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Features:

• Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm
• CAT III 600V safety rating

Unprecedented measurement flexibility

The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

The new Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. Available in 25 cm (10 in) sizes.

Safety Conformance
IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Features:

• Expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
• CAT IV 600 V, CAT III 1000 V
• 7.5 mm coil diameter allows measurement in tight spaces
• Ergonomic design allows easy operation with one hand
• 1.8 m (6 ft) cable
• Three-year warranty

Voltage, continuity and current tester kit with holster.

Features:

Fluke 1AC II VoltAlert Voltage Detector

• Voltbeat™ technology and continuous self-test so you always know it's working
• Upon detection of voltage, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Expanded range: 90 V to 1000 V ac

Fluke T5-1000 1000V Voltage, Continuity and Current Tester

• All models include:
• 4 mm detachable probes
• Instruction sheet

What's included:

Fluke T5-1000 Voltage, Continuity and Current Tester
Fluke 1AC II Voltage Detector
H5 Holster

The fast and easy solution to voltage, continuity and resistance measurements

Ideal for site conditions, the 3 models of the T100 Series 2-pole testers have a rugged construction and ergonomically formed housing for perfect handling. All models offer a patented three-phase rotation detection system providing quick phase rotation indication. Moreover they have a special electrical torch function for working in low light level environments and have an ingress protection rating of IP65. The T100 Series are compliant with EN 61010-1 and EN61243-3 requirements.

Features:

• Resistance measurement (T140)
• Backlight (T140)
• LED Bargraph (T120, T140)
• Display: 3½ digit LCD
• Voltage test
• Optical and acoustical continuity test
• Rotary field indication
• Single pole test for phase detection
• Indication of polarity
• Electrical torch function

Technical Specifications:

Voltage AC/DC 12 - 690 V
Continuity 0 - 400 kΩ
Frequency 0 - 400 Hz
Phase rotation 100 to 690 V
Resistance measurement Fluke T140: Up to 1999Ω
Fluke T120: -
Fluke T100: -
Response time < 0.1 s

Environmental Specifications:

Operating Temperature -10° C to 55° C
Storage Temperature -10 °C to 55° C
Humidity (Without Condensation) Max. 85% relative
Dust/water resistance IP65
Operating Altitude Max. 2000 m

Safety Specifications:

Electrical Safety EN 61010-1
Protection type 2
Overvoltage category Cat. IV 600 V

Mechanical & General Specifications:

Size 240 x 56 x 34 mm
Weight 180 g
Batteries 2 x 1.5 V Micro, IEC LR03
Warranty 2 years

Get control of power problems

The Fluke 43 Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. All in a rugged handheld package.

Features:

• New! NiMH Battery provides extended operating time of 6.5 hours
• Combines the most useful capabilities of a power quality analyzer, multimeter and scope
• Calculates 3-phase power on balanced loads, from a single-phase measurement
• Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
• Monitoring functions help track intermittent problems and power system performance
• Records two selectable parameters for up to 16 days
• 20 measurement memories to save/recall screens and data with cursor readings
• FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
• Measures resistance, diode voltage drop, continuity, and capacitance
• Users/applications manual and power quality video to help answer tough questions
• Complete package with voltage probes and 400 A current clamp, FlukeView Software and optically isolated interface cable
• 3 year warranty on the Fluke 43B, 1 year on accessories

What's included:

C120 Hard Case
TP1 Flat-tipped Slim-Reach™ Test Probes
TP4 4 mm Round Slim-Reach™ Test Probes
i400s AC Current Clamp
OC4USB Optically Isolated USB Interface Adapter
BP120MH Rechargeable NiMH Battery Pack (installed)
PM 8907 Line Voltage Adapter/Battery Charger
SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM
Shielded Banana-to-BNC Adapter
Users Manual / Application Guide

Power quality logging, electrical load studies and energy consumption testing.
The Fluke 1735 Power Logger is the ideal electrician or technician’s power meter for conducting energy studies and basic power quality logging. Set the Power Logger up in seconds with the included flexible current probes and color display. The power quality meter measures most electrical power parameters, harmonics, and captures voltage events.

Applications:

• Load studies - verify electrical system capacity before adding loads
• Energy assessments - quantify energy consumption before and after improvements to justify energy saving devices
• Harmonics measurements - uncover harmonic issues that can damage or disrupt critical equipment
• Voltage event capture - monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping

Features:

• Record power and associated parameters for up to 45 days
• Monitor maximum power demand over user-defined averaging periods
• Prove the benefit of efficiency improvements with energy consumption tests
• Measure harmonic distortion caused by electronic loads
• Improve reliability by capturing voltage dips and swells from load switching
• Easily confirm instrument setup with color display of waveforms and trends
• Measure all three phases and neutral with included 4 flexible current probes
• View graphs and generate reports with included Power Log software
• Compact, rugged design with IP65 case, 600 V CAT III and two-year warranty

What's included:

Includes soft carrying case
4 flexible current probes (15 A/150 A/3000 A)
Power Log software
Voltage leads and clips
Color localization set
PC interface cable
International ac adapter (115/230 V, 50/60 Hz)
Printed English manual
Multi-language manual CD

Analyze airflow. Easily. The 922 Micromanometer.

Today’s HVAC technicians want a simple solution for diagnosing ventilation issues. Differential pressure measurements only tell part of the story. Technicians also want to measure air velocity and flow, without having to resort to expensive, difficult to use, specialist tools. The Fluke 922 makes airflow measurements easy by combining three tools: differential pressure, airflow, and velocity into a single, rugged meter.

Use the Fluke 922 micromanometer to:

• Measure pressure drops across key HVAC equipment to drive peak performance and extend equipment life
• Match ventilation to occupant loads
• Monitor indoor vs. outdoor pressure relationships and manage the building envelope
• Promote indoor comfort and quality
• Perform duct traversals for accurate airflow readings

Fluke 922 was designed and built for how (and where) you do your job, with performance, ruggedness and ease of use, setting the Fluke 922 apart from the competition. The bright white display and ruggedized holster and wrist strap let you take the Fluke 922 into less than ideal environments. The color-coded hoses help you keep track of where your readings are coming from. The simple, intuitive interface means you can measure pressure, velocity, or airflow at the push of a button. The Fluke 922 helps you analyze airflow. Easily.

Features:

• Powerful meter provides differential and static pressure, air velocity and flow readings
• Convenient colored hoses help proper interpretation of pressure readings
• Easy to use without sacrificing performance
• Bright, backlit display for clear viewing in all environments
• User-defined duct shape and size for maximum airflow accuracy
• Resolution down to 0.001 in H2O
• 99 point data storage capacity
• Min/Max/Average/Hold functions for easy data analysis
• Auto power off saves battery life

What's included:

Fluke 922 Airflow Meter
12 inch pitot tube
Two Rubber Hoses
TPak Magnetic Strip
TPak Strap, 9 inches
TPak Latch Tab
Four AA Batteries 1.5 V Alkaline
Users Manual
Hard Carrying Case

Analyze airflow. Easily. The 922 Micromanometer.

Today’s HVAC technicians want a simple solution for diagnosing ventilation issues. Differential pressure measurements only tell part of the story. Technicians also want to measure air velocity and flow, without having to resort to expensive, difficult to use, specialist tools. The Fluke 922 makes airflow measurements easy by combining three tools: differential pressure, airflow, and velocity into a single, rugged meter.

Use the Fluke 922 micromanometer to:

• Measure pressure drops across key HVAC equipment to drive peak performance and extend equipment life
• Match ventilation to occupant loads
• Monitor indoor vs. outdoor pressure relationships and manage the building envelope
• Promote indoor comfort and quality
• Perform duct traversals for accurate airflow readings

Fluke 922 was designed and built for how (and where) you do your job, with performance, ruggedness and ease of use, setting the Fluke 922 apart from the competition. The bright white display and ruggedized holster and wrist strap let you take the Fluke 922 into less than ideal environments. The color-coded hoses help you keep track of where your readings are coming from. The simple, intuitive interface means you can measure pressure, velocity, or airflow at the push of a button. The Fluke 922 helps you analyze airflow. Easily.

Features:

• Powerful meter provides differential and static pressure, air velocity and flow readings
• Convenient colored hoses help proper interpretation of pressure readings
• Easy to use without sacrificing performance
• Bright, backlit display for clear viewing in all environments
• User-defined duct shape and size for maximum airflow accuracy
• Resolution down to 0.001 in H2O
• 99 point data storage capacity
• Min/Max/Average/Hold functions for easy data analysis
• Auto power off saves battery life

What's included:

Fluke 922 Airflow Meter
Two Rubber Hoses
Four AA Batteries 1.5 V Alkaline
Users Manual
Soft Carrying Case

The ultimate tool for troubleshooting and maintenance.

This thermal imager is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.

IR-Fusion® Technology

See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on Ti10 models.

Features:

• Enhanced problem detection and analysis capabilities with IR-Fusion® Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images.
• Optimized for field use in harsh work environments.
• Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool?
• Withstands dust and water—tested to an IP54 rating.
• Delivers the clear, crisp images needed to find problems fast.
• Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD).
• Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.
• Everything needed to get started is included.
• Adjustable hand strap for left-or right-handed use.
• Manufactured in the U.S.A.

What's included:

AC power supply/battery charger (including mains adapters)
SD memory card
SD card reader (USB) for downloading images into your computer
SmartView™ software with free software upgrades for life
Rugged hard carrying case
Soft transport bag
Hand strap
Users manual
Warranty registration card

The Fluke 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances using only clamps – called Stakeless testing. This method doesn’t require the use of earth ground stakes or the disconnection of ground rods.

Testing Methods

• 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
• Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
• Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
• Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
• R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
• Adjustable limits – for quick test result verification

Features:

• One-button measurement concept
• 3- and 4-pole earth ground measurement
• 4-pole soil resistivity testing
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Measuring frequency 128 Hz
• 3- and 4-pole earth ground measurement
• 4-Pole soil resistivity testing
• 2-pole resistance measurement AC
• 2- and 4-pole resistance measurement DC
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Earth impedance measurement at 55 Hz
• Automatic frequency control (AFC) (94, 105, 111, 128 Hz)
• Measuring voltage switchable 20/48V
• Programmable limits, settings
• Continuity with buzzer

What's included:

Fluke 1625 tester
2 test leads
4 earth ground stakes
3 cable reels with wire (2-25 m, 1-50 m)
2 clamps (one inducing, one sensing)
Batteries
Users manual
Rugged carrying case

The Fluke 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances using only clamps – called Stakeless testing. This method doesn’t require the use of earth ground stakes or the disconnection of ground rods.

Testing Methods

• 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
• Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
• Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.

Features:

• One-button measurement concept
• 3- and 4-pole earth ground measurement
• 4-pole soil resistivity testing
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Measuring frequency 128 Hz

What's included:

Fluke 1623 tester
2 test leads
4 earth ground stakes
3 cable reels with wire (2-25 m, 1-50 m)
2 clamps (one inducing, one sensing)
Batteries
Users manual
Rugged carrying case

The Fluke 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances using only clamps – called Stakeless testing. This method doesn’t require the use of earth ground stakes or the disconnection of ground rods.

Testing Methods

• 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
• Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
• Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
• Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
• R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
• Adjustable limits – for quick test result verification

Features:

• One-button measurement concept
• 3- and 4-pole earth ground measurement
• 4-pole soil resistivity testing
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Measuring frequency 128 Hz
• 3- and 4-pole earth ground measurement
• 4-Pole soil resistivity testing
• 2-pole resistance measurement AC
• 2- and 4-pole resistance measurement DC
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Earth impedance measurement at 55 Hz
• Automatic frequency control (AFC) (94, 105, 111, 128 Hz)
• Measuring voltage switchable 20/48V
• Programmable limits, settings
• Continuity with buzzer

What's included:

Fluke 1625 tester
2 test leads
Batteries
Users manual

The Fluke 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances using only clamps – called Stakeless testing. This method doesn’t require the use of earth ground stakes or the disconnection of ground rods.

Testing Methods

3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.

Features:

• One-button measurement concept
• 3- and 4-pole earth ground measurement
• 4-pole soil resistivity testing
• Selective testing, no disconnection of ground conductor (1 clamp)
• Stakeless testing, quick ground loop testing (2 clamps)
• Measuring frequency 128 Hz

What's included:

Fluke 1623 tester
2 test leads
Batteries
Users manual

Accompanies TD01F or TD03F

For consumer units and/or distribution boards with up to 12 ways.

Based on the model forms in BS 7671: 2008

(IEE Wiring Regulations 17th Edition)

A single sided version for up to 15 way boards to support TD01 and TD03

Can also be used in conjunction with TD16

This is used in conjunction with Periodic Inspection Report (TD03)

For certifying an installation in a single dwelling designed, constructed and inspected by one person.

Based on the model forms in BS 7671: 2008
(IEE Wiring Regulations 17th Edition)

AC/DC Current clamps for DMM's
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

Features:

• Battery-powered Hall-effect probe measures 1 A to 1000 A
• 1mV/Amp output guarantees easy reading on your meter
• Take accurate current readings without breaking the circuit

Specifications:

Measurement type: Hall sensor
Nominal current range: 600 A, AC
1000 A, DC
Continuous current range: 1 A - 600 A, AC
1 A - 1000 A, DC
Maximum Non-Destructive Current: 1000 A
Lowest measurable current: 0.5 A
Basic Accuracy: 2% + 0.5 A
(% reading + floorspec)
Useable frequency: DC - 10 kHz
Output level(s): 1 mV/A
Zero error adjustment: Yes

Safety Specifications:

Safety: CAT III, 600 V
Maximum voltage: 600 V

Mechanical & General Specifications:

Warranty: 1 year
Battery Life: 9 V, 60 h
Maximum conductor diameter: 30 mm
2 x 25 mm
Output cable length: 1.6 m
Shrouded banana plugs: Yes

Be ready for anything.
The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365’s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.

Safety Conformance
IEC/EN 61010-1:2001, 600V CAT III

Features:

• 200 A ac and dc current measurement with detachable jaw
• 600 V ac and dc voltage measurement
• Detachable jaw makes accessing wires and viewing the display easier
• Built in flashlight/torch allows for easy illumination and identification of wires
• CAT III 600 V
• Compact design fits in your hand and can be used while wearing protective equipment
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

AC/DC Current clamps for DMM's

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

Features:

• Battery-powered Hall-effect probe measures 1A to 400 A
• 1mV/Amp output guarantees easy reading on your meter
• Take accurate current readings without breaking the circuit
• Maximum conductor Ø 32 mm
• CAT III 600 V safety rating
• Also available with softcase for DMM and clamp (i410 kit)
• One year warranty

Specifications:

Measurement type: Hall sensor
Nominal current range: 400 A, AC/DC
Continuous current range: 1 A - 400 A AC/DC
Maximum Non-Destructive Current: 400 A
Lowest measurable current: 0.5 A
Basic Accuracy: 3.5% + 0.5 A
(% reading + floorspec)
Useable frequency: DC - 3 kHz
Output level(s): 1 mV/A
Zero error adjustment: Yes

Safety Specifications

Safety CAT III, 600 V
Maximum voltage 600 V

Mechanical & General Specifications

Warranty: 1 year
Battery Life: 9 V, 60 h
Maximum conductor diameter: 30 mm
2 x 25 mm
Output cable length: 1.6 m
Shrouded banana plugs: Yes

Small sized AC current clamp

Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters.
The i200 is a single range 200A ac current clamp with current output via safety shrouded banana plugs. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

Features:

• Companion to a DMM to measure up to 200 A AC
• 1mA per Amp output guarantees easy reading on you meter
• Take accurate current readings without breaking the circuit
• Max. conductor Ø 20 mm
• CAT III 600V safety rating

Specifications:

Nominal current range: 200 A
Continuous current range: 0.5 A - 200 A
Maximum Non-Destructive Current: 240 A
Lowest measurable current: 0.5 A
Basic Accuracy: 1% + 0.5 A
(48-65 Hz)
(% reading + floorspec)
Useable frequency: 40 Hz - 10 kHz
Output level(s): 1 mA/A

Safety Specifications:

Safety: CAT III, 600 V
Maximum voltage: 600 V AC

Mechanical & General Specifications:

Warranty: 1 year
Maximum conductor diameter: 20 mm
Maximum conductor size (busbar): 20 x 5 mm
Output cable length: 1.5 m
Shrouded banana plugs: Yes

Optimized for building envelope, restoration and remediation, inspection and roofing applications.

The Fluke TiR1 Thermal Imaging cameras are the perfect imagers for building envelope, restoration and remediation, inspection and roofing applications.

IR-Fusion® Technology
See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on TiR1 models.

Features:

• Includes IR-Fusion® Technology both in camera and software (combines visible image with IR image in full screen or picture-in-picture views) for easy identification and reporting of problems
• Rugged and reliable: Engineered to withstand a 2 m (6.5 ft) drop
• 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
• Temperature range and thermal sensitivity optimized for building diagnostics applications
• Reflected background temperature (reflected temperature compensation)
• Perfect for any application and budget
• Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems)
• No need to carry pen and paper—record findings by speaking into the camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference
• Adjustable hand strap for left- or right-handed users
• Manufactured in the U.S.A

Optimized for building envelope, restoration and remediation, inspection and roofing applications.

The Fluke TiR Thermal Imaging cameras are the perfect imagers for building envelope, restoration and remediation, inspection and roofing applications.
IR-Fusion® Technology
See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on TiR models.

Features:

• Includes IR-Fusion® Technology both in camera and software (combines visible image with IR image in full screen or picture-in-picture views) for easy identification and reporting of problems
• Rugged and reliable: Engineered to withstand a 2 m (6.5 ft) drop
• 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
• Temperature range and thermal sensitivity optimized for building diagnostics applications
• Perfect for any application and budget
• Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems)
• Adjustable hand strap for left- or right-handed users
• Manufactured in the U.S.A.

Entry-level imager shows building heat losses in highest detail
Our new entry-level TiRx Inspector thermal imager shows up building faults and energy waste instantly – and in unrivalled detail. The 160 x 120 pixel resolution is three times that of other entry-level imagers, showing images on a widescreen format LCD. Just point the imager and pull the trigger – the excellent 0.1 °C (NETD) thermal sensitivity at 30 °C highlights even small temperature differences.

Facility managers, building inspectors and energy assessors can all use the instrument to perform rapid building envelope and roofing inspections for restoration and repair. It shows problems like heat loss from HVAC (Heating, Ventilation and Air Conditioning systems), water leakage from pipes and radiators, air leakage from windows, moisture intrusion in insulation and the location of underfloor heating systems. And you can upgrade the TiRx Inspector to a full-featured Fluke TiR thermal imager with Fluke’s IR-Fusion® for advanced analysis and reporting. IR-Fusion® shows a full thermal image, or one combined with a visual image to pinpoint potential faults.

Features:

• Rugged and reliable: Engineered to withstand a 2 m drop
• 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
• Temperature range and thermal sensitivity optimized for building diagnostics applications
• Perfect for any application and budget
• Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems)
• Adjustable hand strap for left- or right-handed users

What's Included:

Fluke TiRx, In-box training DVD,SmartView® analysis and reporting software, 2 GB SD Memory Card, Multi-function Memory Card, Reader for downloading images into your computer, Rugged, hard carry case and portable, soft carry case, Hand strap, adjustable for left of right handed user, Rechargeable battery (TiR32 includes two external smart rechargeable batteries) and AC charger/power supply

Fluke knows temperature, with more than two decades of thermometry experience. Today, we offer the latest in non-contact IR temperature test tools, probes, accessories, and application expertise for a complete range of applications. And Fluke backs its tools with the industry’s best warranty and highest rated customer service.

Reach for a rugged Fluke 60 series IR thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures -40°C to 760°C (-40 °F to 1400 °F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device.

The Fluke 62 Mini non-contact thermometer is the perfect introduction to infrared (IR) thermometers for the professional. With the best accuracy in its class, the Fluke 62 Mini offers quick and reliable surface temperature readings. This compact and portable tool enables professionals to diagnose heating and ventilation problems and monitor the temperature of electrical motors and electrical panels without contact. Rugged enough for industrial environments with its protective rubber “boot, the 62 Mini also comes with a handy nylon holster, keeping quick temperature checks at your fingertips.

Features:

• Single point offset laser sighting
• Best accuracy in its class: + 1% of reading
• Holds temperature readings for 7 seconds
• Dual displays shows current and MAX measurements simultaneously
• Backlit display for poorly lit areas
• Comfortable ergonomic handle with protective rubber boot for added durability
• Fitted carrying case
• Robust, award winning design
• Wide temperature range from -30º to 500ºC (–20º to 932ºF)

What's Included:

Fluke 62 and Instructions

Laboratory accuracy. Wherever you go.

The new Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged, handheld test tool.

Features:

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
• Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• Optional ToolPak accessory allows the thermometer to hang from any metal object (with the rare earth magnet) or secure around a pipe (with hook-and-loop straps) for hands-free operation.
• 3 year warranty

What's Included:

Fluke 51 and Instruction Manual

Fluke knows temperature, with more than two decades of thermometry experience. Today, we offer the latest in non-contact IR temperature test tools, probes, accessories, and application expertise for a complete range of applications. And Fluke backs its tools with the industry’s best warranty and highest rated customer service.

Reach for a rugged Fluke 60 series IR thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures -40°C to 760°C (-40 °F to 1400 °F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device.

Features:

• High-resolution optics
• High accuracy: 1 % and repeatability: 0.5 %
• MAX temperature display
• Laser targeting
• Backlit display
• Expanded measurement range up to 535 °C (999 °F)

What's Included:

Fluke 63 and Instructions

Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. Quickly and conveniently take accurate humidity and temperature readings with the Fluke 971.The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight and easy to hold, the Fluke 971 is the perfect tool for monitoring problem areas. With a rugged holster and protected sensor, the Fluke 971 is built to perform and made to last.

Features:

• Backlit dual display of humidity and temperature
• Measures dew point and wet bulb temperatures
• 99 record storage capacity
• Ergonomic design with belt clip and protective holster
• Quick-response capacitance sensor
• Compact and lightweight (188 g/6.6 oz)
• Temperature range from -20 °C to 60 °C (-4°F to 140 °F)
• Relative humidity from 5 % to 95 %
• Min/Max/Avg Data hold
• Low battery indicator

What's Included:

Fluke 971, Batteries and Instruction Manual

IR Thermometer with K-type thermocouple capability
Lighten up your toolbox. The Fluke 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. It’s fast, efficient, and easy to use, saving you valuable time and effort.

With the Fluke 561 infrared thermometer, you can also take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to-reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections, and wires. Plus, scan ducts, and other hard-to-reach objects from the floor-leave your ladder in the truck. You can use the Fluke 561’s handy flexible pipe probe, or plug in any industry standard type K mini connector thermocouple probe you already own to take super-heat or internal temperatures.

Features:

• IR thermometer for quick measurements up close, or at a distance, without a ladder
• Contact thermometry capability, compatible with all standard mini-connector type K thermocouples, preserves your investment in thermocouples
• Fabric hook-and-loop fastener pipe probe for superheat and sub-cooling and other contact and ambient measurements
• Single-point laser sighting
• Temperature range of -40 °C to 550 ° C (-40 °F to 1022 °F) covers most industrial and residential applications
• Easy emissivity adjustment (Lo, Med, Hi) for measuring pipes and other shiny materials more accurately
• Lightweight (just 12 ounces/340 grams) and portable
• Very easy to use
• Efficient-no need to shut down equipment when making IR measurements
• MIN, MAX, and DIF functions help you quickly identify problems
• Scan large areas or small objects quickly and efficiently

What's Included:

Fluke 561 IR thermometer , K-Type thermocouple fabric hook-and-loop fastener pipe probe , Hard carrying case , 2 AA batteries and Users manual

The Fluke 570 non-contact thermometers are ideal professional diagnostic tools for maintenance professionals requiring the most accurate temperature readings at all distances. The Fluke 570 series infrared (IR) measures surface temperatures, helping to quickly locate lubrication problems, overloads, short-circuits or misaligned and overheated equipment, reducing work and follow-up time, and improving performance.

From close-up electrical connections, to distant room balancing checks, the Fluke 570 series can take IR temperature measurements with ease. Predictive maintenance professionals requiring analysis and documentation use the 574 model with 100-point data logging and included software for graphing and analysis for follow-up reporting and documentation.

Features:

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• Extra bright appearing 635nm laser (tested to the same safety and power standards as less bright laser sights) to clearly highlight the targeted area
• Close-focus option available for specialized applications
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition
• Comfortable, overmolded pistol grip makes target sighting easy
• Adjustable emissivity setting (.01 increments) for more accurate measurement
• Durable hard plastic storage case included

What's Included:

Fluke 572, Hard Case and Batteries

Two-in-one IR and contact thermometers with an innovative dot matrix display.
With a simple, 3-button on-screen menu interface (in 6 languages) the Fluke 568 and 566 digital laser thermometers make even complex measurements easy. Quickly navigate advanced features to adjust emissivity, start data logging, or turn on and off alarms - with just a few pushes of a button.

With a rugged, easy-to-use, ergonomic design, the Fluke 568 and 566 two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), helping you work more efficiently in more applications.

Features:

• Measure -40 °C to 800 °C /-40 °F to 1472 °F
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments
• Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built-in material table
• Capture multiple points of data (up to 99 with the 568, and 20 with the 566), for downloading and recalling later
• Easily adapt to lighting conditions with 2 levels of backlight
• Audible and visual alarms instantly alert you to measurements outside of your set limits
• Quickly identify problems with the MIN, MAX, AVG, and DIF functions
• Make contact thermometer measurements right away with the included Type-K thermocouple bead probe
• Confidently troubleshoot equipment with 1 % measurement accuracy
• Versatile interface with 6 languages from which to choose
• Easily trend and analyze data with included FlukeView® Forms software
• Quickly download stored data with USB connection
• See your data right away without leaving the site, using the USB and your laptop
• Extend your battery life by powering the digital thermometer from your laptop via the USB

What's Included:

Thermocouple K bead probe, Durable hard case , 2 AA batteries , Getting Started guide in 6 languages , USB cable , FlukeView® Forms software on CD , User’s Manual on CD in 6 languages English, Spanish, French, German, Portuguese, and Simplified Chinese)  and 2-year warranty

Laboratory accuracy. Wherever you go.

The new Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged, handheld test tool.

Features:

• Relative time clock on MIN, MAX, and AVG provides a time reference for major events
• Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
  Measures J, K, T, and E-types of thermocouples
• Readout in ºC, ºF, or Kelvin (K)
• Splash and dust resistant case protected by impact absorbing holster
• User-friendly front panel is easy to set up and operate
• Sleep mode increases battery life; typical 1000-hour battery life
• Battery door allows easy battery replacement without breaking the calibration seal
• Optional ToolPak accessory allows the thermometer to hang from any metal object (with the rare earth magnet) or secure around a pipe (with hook-and-loop straps) for hands-free operation.
• 3 year warranty
• Large backlit dual display shows any combination of T1, T2 (52 and 54 only), T1-T2 (52 and 54 only), plus MIN, MAX, or AVG.
• Additional thermocouple types R, S, and N (for a total of 7 different types)
• Recall function allows logged data to be easily reviewed on the meter display
• USB communication port allows data to be exported to optional FlukeView Forms®
• Temperature PC software for further analysis and graphing
• Data Logging up to 500 points of data with user adjustable recording interval

What's Included:

Fluke 54 and Instructions

The Professional Socket Testers. The fast way to check if your sockets are safe.

Fluke has introduced a range of professional electrical socket testers with modern, ergonomic and durable designs. The range includes the Fluke SM100, SM200 and SM300, professional tools designed for contractors to rapidly and reliably test the safety of installed mains sockets.

Features:

• Clear LED indication of wiring status
• Modern, ergonomic design
• Compact and durable
• Simple to use, just plug into a socket

What's Included:

Fluke Socket & See SM100 and Instructions

Take out the guess work - the simple solution for mains wiring testing.

• Logical Green for GO
• Bright, easy to read LED's
• Clear Audible Indication
• Error free testing

Modern production methods ensure great performance and value. Tough, smooth-contoured construction. Eye-catching body colour - easy to find in a toolkit. Advanced electronic circuits mean positive & reliable indication.

The testers are designed to give a quick & easy indication of correct wiring at the socket. Particular emphasis is placed on detecting very dangerous wiring conditions such as reversed live earth connections & disconnected wires.

Features:

• Continuous audible tone gives positive good wiring indication
• Strong warbling tone gives clear warning of faulty wiring
• Advanced electronics include a quad comparator to give clear indication even on noisy circuits
• Detects good plus 13 wiring fault conditions

What's Included:

Testmate ST-220 Socket Tester and Instructions

Fluke SM200 Professional Socket Tester

The Professional Socket Testers. The fast way to check if your sockets are safe.

Fluke has introduced the SM200, a professional electrical socket tester with modern, ergonomic and durable designs. Designed for contractors to rapidly and reliably test the safety of installed mains sockets.

Features:

• Clear LED indication of wiring status
• Audible notification of wiring condition
• Unique soft finger grip
• Handy size - fits in the palm of your hand

Socket & See TELK 400 Test Lead Extension Kit

These innovative adapters will allow the electrician to safely and easily make up and use a wander test lead using an existing 13A extension reel, for connection to the Main Earthing Terminal at the Consumer Unit, to measure R2 and earth bond continuity.

Simply use the Socket & See TELK 400 to convert any extension lead into a wander test lead - any length you want! A three metre earth lead with crocodile clip is supplied with the kit for easy connection to the main earthing terminal. Any brand of test instrument can be used with the operation being perfectly safe, as only the earth path of the cable is used.

Features:

• Easily connects a standard cable reel to make your own wander test lead of any length
• Complete with quality three lead for easy connection to MET (Main Earthing Terminal)
• Can be used for measuring R2 and earth bond continuity
• Compact and lightweight for tool box or pocket
• Low cost alternative to a costly single purpose 50 metre lead plus less cable to handle
• Totally safe in operation - only the earth path of the cable reel is used
• You still have your standard cable reel for everyday use

Thanks to an innovative development, the instrument VEGA78 allow carrying out analysis and tests on single-phase and three-phase electric systems with and without neutral. The instrument display in real time the values of all fundamental electric quantities which characterize the electric system being tested (voltage, current, active power, reactive power, apparent power, power factor, etc.), showing the waveforms of voltages and currents. VEGA78 is used for testing and analysing the quality of the electric service provided by the Electric Power Supplier, for analysing single-phase and three-phase electric users such as offices and industries, when diagnosing voltage anomalies by taking advantage of the possibility of recording electric quantities. The instrument also allows evaluating the harmonic content introduced by non-linear loads such as computers, TV sets, controlled electric motors, etc. which can cause the RCD’s tripping or a neutral overheating. The instrument are supplied with the PC management software, which further expands the analysis possibilities of the data acquired

Specifications:

• TRMS P-N, P-P, P-PE voltage measures (5 inputs)
• TRMS current on phases and neutral (4inputs)
• Active, reactive and apparent powers measures
• Active, reactive and apparent energies measures
• Power factors measure
• Frequency measure
• Max 251 selected parameters at the same time
• Integrated period selectable from 1s to 60min
• Harmonic analysis of voltage and current up to 49th component
• Voltage anomalies (sags, swells) with 10ms resolution
• Numerical and graphical (waveforms) visualization
• Histogram visualization of harmonic analysis
• Vectorial diagram of voltages and currents
• Voltage unbalance
• Predefined recordings of parameters
• TFT colour display with "touch screen"
• 15Mbytes internal memory for recordings saving
• Using of external compact flash and USB pen drives
• USB interface for PC connection
• Windows software for recordings analysis
• Rechargeable Li-Ion battery and external AC/D adapter
• Contextual help selectable on each screen
• Virtual keyboard at display

What's included:

• VEGA78
• KIT800: set of 5 cables with alligator clip
• HTFLEX33D: flexible clamp 3000A AC, 174mm, 4 pcs
• A0055: 100/240V 50Hz /5VDC external adapter
• TOPVIEW2007: PC Windows software + USB cable C2007
• BORSA2051N: carrying bag
• PT400: Pen for touch screen display
• Rechargeable battery Li-ION
• Calibration certificate ISO9000
• User manual on CD-ROM
• Quick reference guide
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1652&product=HT_Italia_PQA823_Professional_Recorder_for_Power_Quality_AnalysisHT Italia PQA823. A new approach on measure, recording, analysis and power quality on electrical installations is possible with family 800 meters of HT ITALIA

Ht Italia PQA823 and PQA824 models, completely designed in Windows CE technology permits an easy and wide fast analysis of a huge quantity of data any other system.
Thanks to an innovative design and a graphic colour TFT "touch screen" wide display these models finally meet all requests from any exigent electrical verifier.
The interface it's incredible "user-friendly" due to the intuitive icon selection of any kind of feature and a contextual help it's available for each screen.
Each internal parameter it's easy to reach for effect of typical Windows tree structure.
Each model permits the visualization of all parameters both in numeric and graphical mode with large use of waveforms and histograms (for harmonic analysis) screens.
The vectorial diagram feature permit also to evaluate the mutual phase angle between voltages and current in order to understand the nature inductive or capacitive of the loads on an installation.
Family 800 meters have a great internal memory (15Mbytes) in order to save recording results for a lot of parameters (e.g: >3 weeks for 251 parameters and integrated period of 15 minutes), but this memory can be expanded by using of external compact flash cards fitted on meters.
Pen drives USB connection it?s also available in order to transfer recordings from meter and realize a practical and sure portable situation of all date.
PQA82x meters are powered by a internal rechargeable Li-Ion battery which permits complete operation for more than 3 hours and are external supplied by using a 100/240V AC adaptor. USB interface permit the connection with PC for download and analysis of recordings with dedicated TOPVIEW Windows software.

Specifications:

• TRMS P-N, P-P, P-PE voltage measures (5 inputs)
• TRMS current on phases and neutral (4inputs)
• Active, reactive and apparent powers measures
• Active, reactive and apparent energies measures
• Power factors measure
• Frequency measure
• Max 251 selected parameters at the same time
• Integrated period selectable from 1s to 60min
• Harmonic analysis of voltage and current up to 49th component
• Voltage anomalies (sags, swells) with 10ms resolution
• Numerical and graphical (waveforms) visualization
• Histogram visualization of harmonic analysis
• Vectorial diagram of voltages and currents
• Flicker analysis (Pst, Plt) in compliance to EN50160
• Voltage unbalance in compliance to EN 50160
• Inrush currents measures
• 5 predefined recordings of parameters
• TFT colour display with "touch screen"
• 15Mbytes internal memory for recordings saving
• Using of external compact flash and USB pen drives
• USB interface for PC connection
• Windows software for recordings analysis
• Rechargeable Li-Ion battery and external AC/D adapter
• Contextual help selectable on each screen
• Virtual keyboard at display

What's included:

• PQA823
• KIT800: set of 5 cables with alligator clip
• HTFLEX33D: flexible clamp 3000A AC, diameter 174mm, 4 pecs
• A0055: external adapter 100/240V 50Hz
• TOPVIEW2007: Windows software + USB cable C2007
• BORSA2051N: carrying bag
• PT400: Pen for touch screen display
• Rechargeable battery Li-ION (fitted on meter)
• User manual on CD-ROM
• Quick reference guide
• Calibration certificate ISO9000
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1651&product=HT_Italia_PQA824_Professional_Recorder_for_Power_Quality_AnalysisHT Italia PQA824 Professional recorder for power quality analysis in compliance to EN50160 and fast voltage transients (spikes) analysis

A new approach on measure, recording, analysis and power quality on electrical installations is possible with family 800 meters of HT ITALIA. PQA823 and PQA824 models, completely designed in Windows CE technology permits an easy and wide fast analysis of a huge quantity of data any other system. Thanks to an innovative design and a graphic colour TFT "touch screen" wide display these models finally meet all requests from any exigent electrical verifier. The interface it's incredible "user-friendly" due to the intuitive icon selection of any kind of feature and a contextual help it's available for each screen. Each internal parameter it's easy to reach for effect of  typical Windows tree structure.
Each model permits the visualization of all parameters both in numeric and graphical mode with large use of waveforms and histograms (for harmonic analysis) screens. The vectorial diagram feature permit also to evaluate the mutual phase angle between voltages and current in order to understand the nature inductive or capacitive of the loads on an installation.
Family 800 meters have a great internal memory (15Mbytes) in order to save recording results for a lot of parameters (e.g: >3 weeks for 251 parameters and integrated period of 15 minutes), but this memory can be expanded by using of external compact flash cards fitted on meters. Pen drives USB connection it's also available in order to transfer recordings from meter and realize a practical and sure portable situation of all date.
PQA82x meters are powered by a internal rechargeable Li-Ion battery which permits complete operation for more than 3 hours and are external supplied by using a 100/240V AC adaptor. USB interface permit the connection with PC for download and analysis of recordings with dedicated TOPVIEW Windows software.

Specifications:

• TRMS P-N, P-P, P-PE voltage measures (5 inputs)
• TRMS current on phases and neutral (4 inputs)
• Active, reactive and apparent powers measures
• Active, reactive and apparent energies measures
• Power factors measure
• Frequency measure
• Max 251 selected parameters at the same time
• Integrated period selectable from 1s to 60min
• Harmonic analysis of voltage and current up to 49th component
• Voltage anomalies (sags, swells) with 10ms resolution
• Numerical and graphical (waveforms) visualization
• Histogram visualization of harmonic analysis
• Vectorial diagram of voltages and currents
• Flicker analysis (Pst, Plt) in compliance to EN50160
• Voltage unbalance in compliance to EN 50160
• Inrush currents measures
• Fast voltage transients with 5μs resolution
• 5 predefined recordings of parameters
• TFT colour display with "touch screen"
• 15Mbytes internal memory for recordings saving
• Using of external compact flash and USB pen drives
• USB interface for PC connection
• Windows software for recordings analysis
• Rechargeable Li-Ion battery and external AC/DC adapter
• Contextual help selectable on each screen
• Virtual keyboard at display

What's included:

• PQA824
• KIT800: set of 5 cables with alligator clip
• HTFLEX33D: flexible clamp 3000A AC, diameter 174mm, 4 pcs
• A0055: 100/240V 50Hz external adapter
• TOPVIEW2007: PC Windows software + USB cable C2007
• BORSA2051N: carrying bag
• PT400: Pen for touch screen display
• Rechargeable battery Li-ION (fitted on meter)
• User manual on CD-ROM
• Quick reference guide
• Calibration certificate ISO9000
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1650&product=HT_Italia_ZG47_Multifunctional_Bluetooth_MeterHT Italia ZG47 Multifunctional meter for safety test verifies and power quality analysis on electrical networks for connection to device with Bluetooth protocol inside

The innovative HT Italia ZG47 model is another great evolution of HT ITALIA in the field of multifunctional meter dedicated to safety test verifies on civil and industrial electric plants in compliance with IEC 60364 IEC/EN61557-1 and VDE0100 standards and for complete power quality analysis in Single and Three phase systems.

HT Italia ZG47, more than the typical optical/serial/USB interface, can be connected also to PC device with Bluetooth protocol included in order to transfer data in remote way with the specified distance of this kind of protocol. This is  possible thanks to the acknowledgement by the meter of a special remote unit (optional accessory C2008) connected to it and programmed in properly mode. In this way is possible the data transfer of data inside memory also with meter do not strictly connected to PC

Specifications:

• Continuity of earth conductors with 200mA
• Insulation resistance with test voltage of 50, 100, 250, 500, 1000V DC
• Trip out time and trip out current of RCD type A, AC Stabdard and Selective
• Line/Loop impedance and prospective short circuit current calculation at high resolution (0.1mOhm) (with optional accessory IMP57)
• Earth resistance with 2-wire and 3-wire methods
• Earth resistivity with 4-wire method
• Global earth resistance without RCD tripping
• Phase sequence indication
• TRMS measurement and recording electrical parameters in single and three phase systems
• Harmonic analysis of voltages/currents up to 49th order + THD% calculation
• Voltage anomalies (sags, swells) recording with 10ms resolution
• Measurement and recording of environmental parameters (°C, °F, %RH, Lux) with optional probes
• Measurement and recording of leakage currents (with option clamp HT96U)
• Memory for saving data and recordings
• Optical / USB interface
• Possibility to connection with Bluetooth protocol (with optional accessory C2008)


What's included:

• HT Italia ZG47
• C2033X: cable 3-wirE with Shuko plug
• KITGSC5: kit of 4 cables 2m , 4 alligators e 2 test leads
• KITTERRNE bag with 4 cable banana/banana + 4 metal rods
• A0050: power adaptor 230V/50Hz
• HTFLEX33D: flexible clamp AC 3000A, diameter 174mm, 3 pcs
• TOPVIEW2006: PC software + optical/USB cable
• BORSA2051: carrying bag
• Calibration certificate ISO9000
• User manual
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1649&product=HT_Italia_GSC53N_Installation_TesterHT Italia GSC53N Integrated instrument for testing electrical installation and analysis on Single and Three phase electrical plants.

Ht Italia GSC53N is a strong evolution equipment developed by HT ITALIA to perform complete test and verify on electrical installations according to the most common safety standards (IEC 61557, VDE 0100, BS7671) and for power quality analysis on general electric networks.  The HT Italia GSC53N with high accuracy, dedicated to each proof technicians, is a very user-friendly instrument thanks to the followed new integrated features:- Setting up to 5 predefined recordings on power quality (EN50160, Voltage Anomalies, Harmonics, Start-up and Power & Energies) for a easier and rapid analysis of the most common situation on plants.- Use of flexible clamp transducers with integrated control logic.  In this way disappear the problem of  replace batteries of power adaptor typical of transducers with external control logic.GSC53N model can perform LINE/LOOP Impedance and prospective short circuit current measurements with high resolution (0.1 mOhm) with use of IMP57 optional accessory.
In this way is possible realize important measures strictly nearly to power transformer.

Specification:

• Continuity test on protective conductors PE with 200mA test current
• Insulation resistance up to 1000V DC
• Tripping time and current of RCDs (type A, AC, general and selective)
• Line/Loop impedance with calculation of the prospective short circuit current
• Line/Loop impedance with high resolution (0.1mOhm) (with IMP57 optional accessory)
• Global earth resistance without tripping out of RCDs
• Earth resistance and ground resistivity
• Phase rotation
• Measurement and recording of TRMS parameters on Single and Three phase systems
• Harmonic analysis of voltage and current up to the 49th harmonic
• Recording of voltage anomalies (sags, swells) with 10ms resolution
• Measurement and recording leakage current (with HT96U optional accessory)
• Measurement and recording of environmental parameters (Temperature, Humidity, Illuminations


What's included:

• HT Italia GSC53N
• C2033X: cable 3-wire with Shuko plug
• KITGSC5: kit of 4 cables 2m , 4 alligators e 2 test leads
• KITTERRNE: set of 4 cable banana/banana + 4 metal rods
• A0050: power adaptor 230V/50Hz
• HTFLEX33D: flexible clamp 3000A AC, max diameter 174mm, 3 pcs
• TOPVIEW2006: Windows software + optical/USB cable C2006
• BORSA2051: carrying bag
• ISO9000 calibration certificate
• User manual
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1648&product=HT_Italia_GSC57_Electrical_Tester_and_Analysis_of_Single_and_Three_Phase_SystemsHT Italia GSC57 Integrated instrument for complete test verify on electrical installation and equipments and for power quality analysis on single and three phase systems

HT Italia GSC57 is the most complete model of the entire meters designed to verify both on electrical installations according to IEC61557, BS7671, VDE0100 and power quality on generic three phase systems.   Flexibility of this meter consents using by installers, technicians, engineers and testers of electrical plants and equipment. GSC57 performs, from the other things, a fault Loop Impedance with high resolution (0.1 mOhm) nearly power transformer thanks use of IMP57 optional accessory.  As logger meter, GSC57 can recording all values of electrical parameters (Voltages, Currents, Powers, Power Factory, Energies, etc.), performing harmonic analysis of Voltages and Currents (up to 49-th order) and consents a supply voltages quality analysis (sags, spikes, breaks) according to EN50160 standards reference.  With optional probes GSC57 can also performing measures and recordings of environmental parameters as Temperature, Humidity, Illumination (Lux) and Leakage currents very important for troubleshooting problem of RCDs wrong tripping.  Each measure can stored inside instrument memory, recalled on instrument display and transferred to  PC using the management standard software in way to create a professional relation which will improve the quality of work.

Specifications:

• Continuity on protective conductors PE with 200mA
• Continuity on protective conductors PE with 10A
• Insulation resistance up to 1000V DC
• Tripping time and current of RCDs (type A, AC, general and selective)
• Line and Loop impedance with calculation of the prospective short circuit current
• Loop/Line impedance with high resolution (0.1mOhm) (with IMP57 optional accessory)
• Global Earth Resistance without RCDs tripping
• Earth resistance with 3-wire and 2-wire methods
• Ground resistivity with 4-wire method
• Contact voltage
• Phase rotation
• TRMS measure and recording of any parameter of Single and Three phase plants
• Harmonic analysis of voltage and current up to the 49th order
• Voltage anomalies (sags, swells) with a 10ms resolution
• Measurement and recording to leakage current (with HT96U optional accessory)
• Measurement and recording of air temperature  (°C/°F), humidity (HR%)
• Measurement and recording Illuminations (Lux)
• Save results inside memory
• Interface for PC comunication

What's included:

• HT Italia GSC57
• C2033X: cable 3-wire with Shuko plug
• A0050: power adaptor 230V/50 Hz
• KITGSC5: kit of 4 cables 2m , 4 alligators e 2 test leads
• KITTERRNE: bag with 4 cable banana/banana + 4 metal rods
• Hz
• C5700: power cable for 10A continuity test
• TOPVIEW2006: Windows PC software + optical/USB cable C2006
• BORSA2051: carrying bag
• Calibration certificate ISO9000
• User manual
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1647&product=HT_Italia_MPP300_Measuring_Instrument_for_Single_and_Three-phase_Multi-string_SystemsHT Italia MPP300 Measurer and recorder of the efficiency of single-phase and three-phase multi-string systems

The innovative accessory MPP300, used together with SOLAR300N or SOLAR I-V, allows measuring and recording the main parameters which characterize single-phase and three-phase, single-string and multi-string (up to three strings) photovoltaic systems. MPP300 is perfect for use in systems with three-MPPT three-phase inverter and in three-phase systems provided with three single-phase inverters. MPP300 is provided with a practical anti-shock “field” case, lightweight and small in size.
The front panel carries the LEDs for operating information and the DC and AC inputs for upstream and downstream connection of the inverter(s). MPP300 interfaces with SOLAR300N via USB connection and SOLAR I-V via wireless connection. SOLAR300N and SOLAR I-V are used for MPP300 settings, to start/stop recording electrical and environmental parameters and to enable the download of the recorded values.
The master instrument SOLAR300N or SOLAR I-V is only used in the initial and final phase of recording, and it does not play any active role while recording electrical and environmental parameters. Therefore, while MPP300 and SOLAR-02 respectively record the electrical and environmental parameters of the system being measured, it is possible to use the master instrument SOLAR300N or SOLAR I-V for carrying out other measurements. For example, with SOLAR I-V it is possible to measure the I-V characteristics of strings and modules

Specifications:

• DC/AC TRMS voltage meas. (single-phase and three-phase)
• DC/AC TRMS current meas. (single-phase and three-phase)
• DC/AC power measurement (single-phase and three-phase)
• Simultaneous measurements up to 3 strings (max 3 MPPT)
• Connection with master unit SOLAR300N and SOLAR I-V
• Power supply with rechargeable Li-ION battery
• LED operating indications
• USB port for connection to unit SOLAR300N
• RF connection for connection to SOLAR-02 and SOLAR I-V
• Internal memory for saving recordings

What's included:

• MPP300
• KITMPPDCW: set of 2 cables, 2m, for DC voltage measurement, 3pcs
• KITMPPDCC: Set of 2 alligator clips for DC voltage measurement, 3pcs
• KITMPPACW: Set of 4 cables, 2m, for AC voltage measurement
• KITMPPACC: Set of 4 alligator clips for AC voltage measurement
• Li-Ion rechargeable battery
• A0055: Power supply 230V / 50-60Hz EU plug
• C2007: USB cable
• BORSA2051: carrying bag for accessories
• User manual on CD-ROM
• Quick guide
• ISO9000 calibration certificate
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1646&product=HT_Italia_I-V400_Solar_Photovoltaic_Multifunction_InstrumentHT Italia I-V400 Multifunction instrument for verification of I-V characteristic of photovoltaic strings and modules

HT Italia I-V 400 is the ideal solution for the ordinary and scheduled maintenance of photovoltaic systems. With I-V 400, searching for possible failures and problems in systems is extremely rapid, efficient and intuitive. I-V 400 carries out the field measurement of the I-V characteristic and of the main characteristic parameters both of a single module and of module strings. The instrument measures, together with the I-V characteristic of the device being tested, also the values of its temperature and incident irradiation. The acquired data are then processed to extrapolate the I-V characteristic at standard test conditions (STC) in order to proceed with the comparison with the nominal data declared by the modules’ manufacturer, thus immediately determining whether or not the string or the module being tested respects the characteristics declared by the manufacturer. Output current or voltage from the module or string is measured with the 4-terminal method, which allows extending the measurement cables without requiring any compensation for their resistance, thus always providing accurate and precise measures. The detection of I-V curve is possible also performing far irradiance/temperature measurement by using the remote unit SOLAR-02 (optional accessory) and the RF connection with the master unit.
In its internal memory, I-V 400 manages a database of photovoltaic modules, which can be updated at any time both via the management software and directly on the instrument. Together with the measurement of the I-V characteristic and the extrapolation of the characteristic at standard test conditions, I-V 400 compares the obtained values with the values declared by the manufacturer, immediately providing the OK / NO result of the test. The operator must not do any calculation, nor any difficult operation. The instrument carries out the comparison rapidly and automatically.

Specifications:

• Measurement of output voltage from module/string up to 1000V DC
• Measurement of output current from module/string up to 10A DC
• Measurement of solar irradiation [W/m2] with reference cell
• Measurement of environmental/module temperature, automatic or by means probe
• Measurement of output DC and nominal power from module/string
• Numerical and graphical display of I-V characteristic
• Measurement of the resistance of photovoltaic module series
• Mechanical inclinometer for the detection of the incidence angle of solar irradiation
• 4-terminal measuring method
• Comparison with standard conditions (STC 1000 W/m2, 25C)
• Evaluation of testing result: OK / NO
• Management of up to 30 types of photovoltaic modules in the internal database
• Internal memory for data saving
• Recalling results on the display
• Optical/USB port for PC connection
• Help on line at display

What's included:

• I-V 400
• KITGSC4: Kit including 4 cables + 4 alligator clips
• KITPVMC3: Kit including 2 Multi-Contact 3 adapters for MC3 connector
• KITPVMC4: Kit including 2 Multi-Contact 3 adapters for MC4 connector
• HT304: Reference cell with tilt stand and connection cable
• TOPVIEW2006: Software on CD-ROM and optical-to-USB connection cable C2006
• BORSA2051: carrying bag
• ISO9000 calibration certificate
• User manual
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1645&product=HT_Italia_COMBI419_Multifunction_MeterHT Italia COMBI419 Multifunction Meter for safety test verifies, automatic tests and use of remote probe

HT Italia COMBI419 is an innovative meter designed to perform all safety test verifies on electrical installations in compliance to recently standards (VDE0100, BS7671 etc..), more than measure of leakage currents. The meter it's very easy to use and have a wide number of internal features which are selectable by using the multilanguage menu.

The instrument permits, moreover, to start principal measures by using a special remote prove (PR400 optional accessory) particular useful to perform tests in very quickly mode and the AUTO internal function to perform sequential measurements of Global Earth Resistance, test on RCDs' and Insulation directly on sockets of civil installations.

A contextual help menu selectable by user it's available for each measurement function and permits a valid information during connection of meter to the installation.

The newest electronic function selector on the HT Italia COMBI419 gives the meter a extreme rugged structure for perfect using on field".

A wide internal memory permits the saving of any measurements and the transfer to PC by serial port with dedicated software it's possible.

Each measure can be saved with all the sub-results and test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measure was performed. 

Specifications:

• Continuity test with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
• rip out time of RCDs type AC, A Standard and Selective
• Trip out current of RCDs type AC, A Standard and Selective
• Loop Impedance P-P, P-N, P-PE
• Loop Impedance P-P, P-N, P-PE with high accuracy (0.1mOhm with IMP57 optional accessory)
• Prospective short circuit current
• Contact voltage
• Global Earth Resistance without RCD tripping
• Phase sequence indication
• AUTO function: automatic sequence test of Global Earth Resistance + RDC test + Insulation
• AC TRMS voltage and current
• Environmental parameters measure (°C, °F, %RH, Lux)
• Measure with remote probe (PR400 optional accessory)
• Leakage current
• Data HOLD
• Contextual help at display
• Internal memory
• Optical-USB interface with PC connection


What's Included:

HT Italia COMBI419, C2033X: cable 3 wires with Shuko plug, UNIVERSALKIT: set of 3 cable + 3 alligator clips + 1 test lead, BORSA75N: carrying bag, Calibration Certificate ISO9000, User's manual on CD-ROM, Quick reference guide.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1644&product=HT_Italia_COMBI420_Multifunction_MeterHT Italia COMBI420 Multifunction Meter for safety test verifies, power measurements, automatic tests and use of remote probe

HT Italia COMBI420 is an innovative meter designed to perform all safety test verifies on electrical installations in compliance to recently standards (VDE0100, BS7671 and so on, measure and save results of environmental parameters (illuminanance, temperature), leakage currents and active power, harmonics, power factor measurements on single phase systems. The meter it's very easy to use and have a wide number of internal features which are selectable by using the multilanguage menu. The instrument permits, moreover, to start principal measures by using a special remote prove (PR400 optional accessory) particular useful to perform tests in very quickly mode and the AUTO internal function to perform sequential measurements of Global Earth Resistance, test on RCDs' and Insulation directly on sockets of civil installations. A contextual help menu selectable by user it's available for each measurement function and permits a valid information during connection of meter to the installation. The newest electronic function selector give to the meter a extreme rugged structure for perfect using "on field". A wide internal memory permits the saving of any measurements and the transfer to PC by serial port with dedicated software it's possible. Each measure it's saved with all the sub-results and test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measure was performed.

Specification:

• Continuity test with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
• Trip out time of RCDs type AC, A Standard and Selective
• Trip out current of RCDs type AC, A Standard and Selective
• Loop Impedance P-P, P-N, P-PE
• Loop Impedance P-P, P-N, P-PE with high accuracy (0.1mOhm with IMP57 optional accessory)
• Prospective short circuit current
• Contact voltage
• Global Earth Resistance without RCD tripping
• Phase sequence indication
• AUTO function: automatic sequence test of Global Earth Resistance + RDC test + Insulation
• AC TRMS voltage and current
• Active, Reactive, Apparent power and power factor on single phase system
• Harmonics voltage/current up the 49th and THD% on single phase system
• Environmental parameters measure (°C, °F, %RH, Lux, sound level)
• Measure with remote probe (PR400 optional accessory)
• Leakage current
• Data HOLD
• Contextual help at display
• Internal memory
• Optical-USB interface with PC connection


What's included:

COMBI420, C2033X: cable 3 wires with Shuko plug, UNIVERSALKIT: set of 3 cable + 3 alligator clips + 1 test lead, BORSA75N: carrying bag, Calibration Certificate ISO9000, User manual on CD-ROM, Quick reference guide

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1643&product=HT_Italia_HT9022_TRMS_DC,_AC+DC_Clamp_Meter_up_to_1000AHT Italia HT9022 TRMS DC, AC+DC clamp meter up to 1000A with Power/Harmonic, inrush current measurements and data logger

HT Italia HT9022 is a clamp meter that performs DC, TRMS AC+DC measurement of current up to 1000A, AC/DC voltage up to 1000V, frequency, resistance and continuity. This model also perform measures of Active, Reactive, Apparent power, Power Factor, Energy, Voltage/Current harmonics, both in single phase and three phase balanced systems and have a patented phase rotation measures with an innovative one wire method. The meter permits to detect and save also inrush current events and can perform also a recording of all parameters with selectable IP. Recordings can be transferred to PC via Bluetooth connection. The large graphic LCD display (128x128pxl) with backlight permits an easy readability also in critical visual conditions. The instrument is complying with IEC/EN61010-1, CAT IV 600V and is ideal to solve typical problems occurring in industrial environments such as troubleshooting, non-linear loads, frequency driven motors, PCs.

Specifications:

• DC, AC + DC TRMS current up to 1000A
• DC, AC + DC TRMS voltage up to 1000V
• Resistance and continuity test
• Frequency with test leads
• Frequency with jaws
• Phase sequence / Coincidence and with 1 wire
• DC Power
• Active, Reactive, Apparent power on Single/Three phase systems
• Active, Reactive energy on Single/Three phase systems
• Power Factor on Single/Three phase systems
• Harmonic voltage/current up to 25th with THD% calculation
• Inrush current
• Data logger with programmable IP
• Autorange
• Backlight
• Auto Power OFF
• Data HOLD
• MAX/MIN/CREST
• PC connection via Bluetooth

What's included:

HT9022, Couple of test leads, Couple of alligator clip, Batteries, Carrying bag, User manual, ISO9000 calibration certificate.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1642&product=HT_Italia_HT9021_AC/DC_TRMS_Professional_Clamp_Meter_1000AHT Italia HT9021 AC/DC TRMS Professional Clamp Meter 1000A

HT Italia HT9021 professional clamp is designed for DC/AC TRMS current measurement up to 1000A, and AC/DC voltage for achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard. The model have a large LCD 4 digit display (6000counts), with backlight and bargraph to more easy reading in critical environments. The model perform also resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

Specifications:

• TRMS measurement
• AC/DC current up to 1000A
• AC/DC voltage up to 1000V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Frequency with jaws and test leads
• Capacitance
• Diode test
• Duty Cycle
• Temperature with type K probe
• Autorange
• Data HOLD
• MAX/MIN/ZERO
• PEAK CURRENT (<10ms)
• Backlight
• Bargraph
• AutoPowerOFF


What's included:

HT9021, 4413-2: couple of test leads, Type K bead probe + adapter, Carrying bag, Battery, User manual.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1641&product=HT_Italia_HT9019_AC_TRMS_Professional_Clamp_Meter_1000AHT Italia HT9019 AC TRMS Professional Clamp Meter 1000A

HT Italia HT9019 professional clamp is designed for AC TRMS current measurement up to 1000A, and AC/DC voltage for achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard. The model have a large LCD 4 digit display (6000counts), with backlight and bargraph to more easy reading in critical environments. The model perform also resistance and continuity test measurements. The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

Specification:

• TRMS measurement
• AC current up to 1000A
• AC/DC voltage up to 1000V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Autorange
• Data HOLD
• MAX/MIN/ZERO
• PEAK CURRENT (<10ms)
• Backlight
• Bargraph
• AutoPowerOFF


What's included:

HT9019, 4413-2: couple of test leads, Carrying bag, Battery, User manual.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1640&product=HT_Italia_HT9015_AC/DC_TRMS_Professional_Clamp_Meter_HT Italia HT9015 AC/DC TRMS Professional Clamp Meter

HT Italia HT9015 professional clamp is designed for AC/DC TRMS current measurement up to 600A, and AC/DC voltage for achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard. The model have a large LCD 4 digit display (6000counts), with backlight and bargraph to more easy reading in critical environments. The model perform also resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

Specifications:

• TRMS measurement
• AC/DC current up to 600A
• AC/DC voltage up to 1000V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Frequency with jaws and test leads
• Capacitance
• Diode test
• Duty Cycle
• Temperature with type K probe
• Autorange
• Data HOLD
• MAX/MIN/ZERO PEAK CURRENT (<10ms)
• Backlight
• Bargraph
• AutoPowerOFF

 

What's included:

HT9015, 4413-2: couple of test leads, Type K bead probe + adapter, Carrying bag, Battery, User manual.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1639&product=HT_Italia_HT9014_AC_TRMS_Professional_Clamp_Meter_HT Italia HT9014 AC TRMS professional clamp meter

HT Italia HT9014 professional clamp is designed for AC TRMS current measurement up to 600A, and AC/DC voltage for achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard. The model have a large LCD 4 digit display (6000counts), with backlight and bargraph to more easy reading in critical environments. The model perform also resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge

Specification:

• TRMS measurement
• AC current up to 600A
• AC/DC voltage up to 1000V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Frequency with jaws and test leads
• Capacitance
• Diode test
• Duty Cycle
• Temperature with type K probe
• Autorange
• Data HOLD
• MAX/MIN/ZERO
• PEAK CURRENT (<10ms)
• Backlight
• Bargraph
• AutoPowerOFF

 

What's included:

HT9014, 4413-2: couple of test leads, Type K bead probe + adapter, Carrying bag, Battery, User manual.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1638&product=HT_Italia_HT9012_AC_professional_clamp_meter_up_to_600AHT Italia HT9012 AC professional clamp meter up to 600A

HT9012 professional clamp is designed for AC current measurement up to 600A, and AC/DC voltage for achieve safety CAT IV 600V according to IEC/EN61010-1 safety standard. The model have a LCD display with backlight to more easy reading in critical environments. The model perform also resistance and continuity test measurements. The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

Specifications:

• AC current up to 600A
• AC/DC voltage up to 1000V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Manual/Autorange
• Data HOLD
• MAX
• Backlight
• AutoPowerOFF

 

What's included:

HT Italia HT9012, 4413-2: couple of test leads, Carrying bag, Battery, User manual

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1637&product=Seaward_Solar_Survey_100_Irradiance_MeterSeaward Solar Survey 100 Irradiance Meter

The Solar Survey 100 is a unique irradiance meter capable of measuring more than just light intensity. A built-in digital compass measures roof orientation, and a built-in digital inclinometer measures the roof pitch.

Suitable for both Solar Photovoltaic (solar PV) and Solar Thermal applications, the Solar Survey 100 measures irradiance up to 1250Wm-2 or BTU/hr/ftf2 via a micro-cell, meaning it acts as a solar cell and therefore offers a more relevant reading than other irradiance meters which use photo-diodes. In addition, the Solar Survey 100 also digitally measures ambient air and module temperature simulataneously.

All of the Solar Survey 100 measurements are taken in real time, and a hold function enables the screen to be frozen so that results can be recorded.

Features:

• Measures irradiance as required by IEC 62446
• Built-in compass and inclinometer measure roof orientation and pitch
• Suitable for both photovoltaic and solar thermal installations
• Perfect for surveying potential solar sites
• Rugged, robust and handheld


Technical Specification:

Irradiance Display Range: 0 - 1500 Wm-2 or 0 - 500 BTU/hr/ft2
Measurement Range: 100 – 1250 Wm-2 or 30 - 400 BTU/hr/ft2
Resolution: 1 BTU/hr/ ft2 / 1Wm-2

Temperature Display Range: -30°C to +100°C
Measurement Ranges: -30°C to +100°C
Resolution: 1°

Compass Bearing Display Range: 0° to 360°
Measurement Ranges: 0° to 360°
Resolution: 1°

Inclinometer Display Range: 0° to 90°
Measurement Ranges: 0° to 90°
Resolution: 1°

General Specifications:

Display: Custom LCD
Power Supply: 2AA Alkaline Batteries
Auto Power Down: After 2 minutes

Serviceability:

Warranty: 2 year
Calibration: 1 year

What's included:

Seaward Solar Survey 100 Irradiance Meter, Temp Probe, Quick Start Guide and Manufacturer Calibration Certificate.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1636&product=Fluke_TL165_UK_Test_Lead_SetFluke TL165 UK Test Lead Set

This set contains:

• Rugged test leads (red, blue, green)
• Fused test probes (red, blue, green)
• Standard unfused test probes (red, blue, green)
• Alligator clips (red, blue green)
• Adapter (x3)
• Probe tip covers (x3)
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1634&product=Kewtech_KT77_Downloading_Portable_Appliance_TesterKewtech KT77 Downloading Portable Appliance Tester

The Kewtech KT76 PAT Tester is a simple to use dual voltage, manual PAT tester suitable for use on Class 1 and Class 2 appliances including both 230V domestic and 110V industrial appliances.

Features:

• Full Tests for 230V appliances
• Full Tests for 110V appliances
• Standard and programmable test sequences
• Sophisticated data capture with querty keyboard and fast recording systems
• Fast versatile download via USB stick
• Help screens
• Expert and normal mode
• Table of lead resistances
• 100 mA, 10A & 25A Continuity
• 250 / 500V Insulation
• 230V Earth leakage – differential measurement
•  Substitute leakage
• 230V Touch leakage
• Large clear display
• Extension lead and IEC lead tests
• Calibrated earth bond lead
• Selectable pass limits
• Uses high impact resistance rotomoulded case with room for test leads to provide for a self-contained tester
• Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment

 

What's Included:

Kewtech KT77, IEC mains cord 1.5m, Black Test Lead 1m, Printed Instruction manual and USB stick

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1633&product=Kewtech_KT76_Manual_Portable_Appliance_TesterKewtech KT76 Manual Portable Appliance Tester

The Kewtech KT76 PAT Tester is a simple to use dual voltage, manual PAT tester suitable for use on Class 1 and Class 2 appliances including both 230V domestic and 110V industrial appliances.

Features:

• Tests 230V appliances
• Tests 110V appliances
• 200 mA Continuity
• 250 / 500V Insulation
• 230V Earth leakage – differential measurement
• Substitute leakage
• 230V Touch leakage
• Large clear display
• Extension lead and IEC lead tests
• Calibrated earth bond lead
• Adjustable pass / fail limits
• Reference inner lid label
• Uses high impact resistance rotomoulded case with room for test lead to provide for a self-contained tester
• Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment

 

What's Included:

Kewtech KT76, IEC mains cord 1.5m, Black Test Lead 1m and Printed Instruction manual


]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1630&product=Socket_&_See_SOK13SO_Socket_Opener_(Single)newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1629&product=Amprobe_SV-U_Carrying_CaseAmprobe SV-U Carrying Case
• Soft pouch zippered carrying case
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1628&product=Amprobe_TL245A_PVC_insulated_standard_test_leadsAmprobe TL245A PVC insulated standard test leads
• CAT III 1000V rated
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1627&product=Amprobe_VC30A_Vinyl_Carrying_Casenewavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1626&product=Amprobe_SC-5000_4”_Signal_Clamp_for_AT-5000_series_newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1625&product=Amprobe_BR-5000_Rechargeable_battery_pack_for_receiver_AT-5000_seriesnewavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1624&product=Amprobe_BT-5000_Rechargeable_battery_pack_for_transmitter_AT-5000_seriesnewavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1623&product=Amprobe_EPS-5000_International_Charging_Kit_for_AT-5000newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1622&product=Amprobe_M-5000_Sonde_Pipe_transmitter_for_AT-5000_seriesnewavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1621&product=Amprobe_SC-3500_4”_Signal_Clamp_for_AT-3500newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1620&product=Amprobe_MLS55-3_Pipe_transmitter_for_AT-3500newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1619&product=CK_T3672_Solar_PV_Installation_Tool_KitCK T3672 Solar PV Installation Tool Kit

Solar Installation Tool Kit comprising of the following components:

Solar PV ratchet crimping pliers for solar PV MC3 & MC4 connectors (2.5 - 4.0 - 6.0mm²)

• Heavy duty construction, tested up to 40,000 cycles, guaranteed for 30,000 crimps per tool.
• Auto-stop ratchet system releases when correct pressure is applied to ensure precise crimping.
• Precision engineered dies for quality crimps and safe connections.

Solar PV cable strippers (2.5 - 6.0mm²)

• Razor sharp, preset stripping blades for fast, precise and damage free stripping of solar power cables.

Redline VDE cable cutters 160mm

• Shearing action for clean results.
• Razor sharp, parrot beak blades for effortless cuts.
• VDE approved - individually tested to 10,000v for safe live working up to 1,000v.
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1618&product=Summit_85_Backlit_Digital_MultimeterSummit 85 Backlit Digital Multimeter

Free gift with selected TPI products

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1617&product=Summit_45_Digital_MultimeterSummit 45 Digital Multimeter

Free gift with selected TPI products.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1616&product=Understanding_Circuit_Protection_Series_Part_1:_Intro_to_Protection_for_Safety_Understanding Circuit Protection Series Part 1: Intro to Protection for Safety and Fault Protection (DVD7)

The Understanding Circuit Protection Series helps to reinforce electrical understanding for anyone who specifies or installs equipment for an electrical installation. The first video in the series "Introduction to Protection for Safety and Fault Protection” is a comprehensive examination of the following topics:

• The fundamental requirements for Protection for Safety detailed in the 17th Edition
• The concepts and practical aspects behind electrical hazards and electrical safety
• The different faults and Fault Currents
• TN and TT supply systems and how they can affect Fault Currents
• Explanation of Earth Fault Loop Impedance
• Introduction to different types of circuit protection device (Fuses, Circuit Breakers, MCCBs and RCDs) and the types of fault and fault current they protect against
• Example of a shock current for which there is no protection.

Presented by NICEIC’s Tony Cable and learninglounge.com presenter Dave Austin, this video combines practical examples and excellent computer imagery and animated diagrams to present the topics in an interesting and dynamic way; really helping viewers to understand the subject.
This video is ideal for anyone who wants to refresh or improve their existing understanding of circuit protection, especially with regards the 17th Edition of the Wiring Regulations, or for those learning about the subject for the first time.

Duration: 0:49:31

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1615&product=Code_of_practice_for_in_service_Inspection_and_Testing_of_Electrical_Equipment_(PAT)Code of practice for in service Inspection and Testing of Electrical Equipment (PAT)

The IEE Code of Practice for In-Service Inspection and Testing of Electrical Equipment gives guidance to those responsible for the inspection testing and maintenance of electrical appliances.

It also provides advice on compliance with health and safety legislation. The text specifies the frequency and scope of inspections and testing in different environments

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1614&product=New_Snags_and_Solutions_Part_3:_Inspection_&_Testing_17th_Edition_1st_Amendment__(SNA3)New Snags and Solutions Part 3: Inspection & Testing 17th Edition 1st Amendment  (SNA3)

Snags and Solutions Part 3 contains 50 of the most common problems associated with Inspection and Testing.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1613&product=Seaward_PAT_Training_Course_DVDSeaward PAT Training Course DVD

This new PAT training course DVD features full-length demonstrations and detailed animations explaining PAT testing principles, electrical safety tests, legislation and code of practice. The DVD also includes a FAQ’s section, answering commonly asked questions. An online exam and a personalised, printable certificate showing you’ve passed are included.

The DVD divides into interactive chapters so you can navigate from section to section until you’ve understood each subject fully and you’re ready for the exam.

Chapters:

1. Introduction
2. PAT Testing Explained
3. The Principles of PAT Testing
4. Test Demonstrations
5. Common Problems and FAQs
6. Online Exam

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1612&product=Seaward_PATGuard_Elements_PAT_Testing_SoftwareSeaward PATGuard Elements PAT Testing Software

PATGuard Elements is a manual entry PAT software program, designed for use with manual PAT testers, enabling a formal log of portable appliance test results to be stored and called upon as required.

This easy-to-use programme is surprisingly clever for an entry level program, boasting several useful features. One of the main benefits of PATGuard Elements is the range of test reports it offers. Another is its test history feature which enables any new test results to be added to the history of an appliance. An easy set up wizard and upgrade path to the PATGuard Elite PAT software program make PATGuard Elements a prudent choice for those starting out in PAT testing or with an in-house responsibility.

Features:

• Rapid data entry
• Range of test reports for trend analysis
• Full test history against each appliance
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1611&product=Seaward_PrimeTest_50_PATBAG_PAT_Testing_Kit_with_Elements_SoftwareSeaward PrimeTest 50 PATBAG PAT Testing Kit with Elements Software

The Seaward PrimeTest 50 PAT testing kit has been designed to offer an all-inclusive solution to basic pass/fail PAT testing. PATGuard Elements software (optional) enables fast manual data-entry for record-keeping of all test results including a full test history against each appliance, and invoice generator - ideal for the efficient running of your PAT business.

Features:

Earth Continuity:
Test Current +/- 200mA DC
PASS/FAIL Threshold 0.2ohms


Insulation Resistance:
Test Voltages 500V DC
PASS/FAIL Threshold 2Mohms


IEC Lead Test:
Tests Performed Earth Continuity
Insulation Resistance
Live / Neutral Checks for o/c, s/c and crossed

Power Socket Test
Input Voltage Range 230V +10%, -15% AC
Indicators Phase to Earth Voltage
  Phase to Neutral Voltage
  Neutral to Earth

Weight and Dimensions:
Weight and Dimensions 800g/11cm (w) x 5.5cm (d) 27cm (l)

Power Source:
Power Source 6 x AA Type disposable cells

PATGuard Elements System Requirements:
IBM Compatible PC
Processor Speed 500Mhz or higher
Microsoft Windows XP/VISTA/Windows 7
32 & 64 bit operating systems
512Mb RAM
150Mb available hard disk space
Colour monitor with 32 bit colour or greater video card
CD ROM drive

Licences:
PATGuard Elements Licence (387A912)

What's included:

Primetest 50, PATBag carrying case, PATGuard Elements, 110V adaptor, Training DVD, Guide to PATtesting, Reference Card, Business Builder, PATlog Book, 500 PASS labels, 500 Fail labels ]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1610&product=NICEIC_Leakage_Clampmeter_LCMNICEIC Leakage Clampmeter LCM

An invaluable aid to detecting faulty circuits that may be causing a RCD to operate.

Versatile and accurate with a range 1 mA to 150 A + / - 2% making it suitable for many applications.

Incorporating a ""Hold option"" which is useful for difficult to access positions.

Special Offer: Whilst stocks last get a free CB1 Checkbox worth £103.38 inc VAT

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1609&product=NICEIC_Socket_Interface_Adapter_SIANICEIC Socket Interface Adapter SIA

The NICEIC has launched the new, inexpensive, time and problem saving Socket Interface Adaptor that is fast becoming an essential piece of equipment for every electricians toolkit.


Just plug the adaptor into the socket outlet, then plug the leads from your digitol insulation/continuity tester to the adaptor, then you are ready to go!

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1608&product=NICEIC_Proving_Unit_PU1NICEIC Proving Unit PU1

The NICEIC PU1 Proving unit provides the electrician with a safe method of proving the operation of 2 pole Voltage and Continuity Testers.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1607&product=NICEIC_Electrical_Tester_-_LCD_ET2NICEIC Electrical Tester - LCD ET2

The NICEIC's new ET1 and ET2 Electrical Testers provide electricians with a versatile high quality Voltage and Continuity tester.
Screw-on Tip caps provide compliance with the Health & Safety Executives GS38 Guidance note.

Features:

 

• High resolution LCD Display
• AC/DC Voltage Indication
• Polarity Detection
• Single-pole phase test
• Continuity test
• Rotary field indication
• Flashlight
• HSE GS38 compliant Tip caps
• IP64
• Overvoltage class CAT III 1000v / CAT IV 600V Self Test Button
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1606&product=NICEIC_Electrical_Tester_-_LED_ET1NICEIC Electrical Tester - LED ET1

The NICEIC's new ET1 and ET2 Electrical Testers provide electricians with a versatile high quality Voltage and Continuity tester.
Screw-on Tip caps provide compliance with the Health & Safety Executives GS38 Guidance note.

Features:

• Clear LED indication
• AC/DC Voltage Indication
• Polarity Detection
• Single-pole phase test
• Continuity test
• Rotary field indication
• Flashlight
• HSE GS38 compliant Tip caps
• IP64
• Overvoltage class CAT III 1000v / CAT IV 600V Self Test Button
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1605&product=NICEIC_Advanced_Checkbox_3_CB3NICEIC Advanced Checkbox 3 CB3

The NICEIC Advanced check box provides a quick and simple method of checking the ongoing accuracy of electrical installation test instruments. It does not replace the calibration requirements but provides a ready check on instrument accuracy helping to minimise incorrect certification and costly revisits to confirm installation compliance.

 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1604&product=Onsite_PAT_Awareness_Training__Course_for_Three_PeopleOnsite PAT Awareness Training  Course for Three People

This course gives those involved in the in-service inspection and testing of electrical equipment the opportunity to gain an insight into the subject of portable appliance testing. Using the latest series of portable appliance testers and software, delegates will learn how to carry out the full range of tests required on a variety of typical appliances.

The course starts with an introduction to the subject of portable appliance testing and an overview of the functions and operation of the test instruments required.

The course then develops to look at the types of appliances and classes of equipment usually encountered and the tests that are applied to each appliance.

Each test will be demonstrated using sample equipment and delegates will have the opportunity to use and operate the test instruments.

The course concludes with a Q&A session giving those attending the chance to ask individually questions and seek clarification and guidance on all electrical issues.

This course is aimed at those with basic electrical knowledge who are new to portable appliance testing and require an introduction to PAT with a portable appliance tester. Those who have recently purchased a tester or need further information prior to purchasing would be ideal candidates for this course.

The duration of the course is 4 hours.

This is only available to UK Mainland Customers.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1603&product=Onsite_PAT_Awareness_Training_Course_for_One_PersonOnsite PAT Awareness Training Course for One Person

This course gives those involved in the in-service inspection and testing of electrical equipment the opportunity to gain an insight into the subject of portable appliance testing. Using the latest series of portable appliance testers and software, delegates will learn how to carry out the full range of tests required on a variety of typical appliances.

The course starts with an introduction to the subject of portable appliance testing and an overview of the functions and operation of the test instruments required.

The course then develops to look at the types of appliances and classes of equipment usually encountered and the tests that are applied to each appliance.

Each test will be demonstrated using sample equipment and delegates will have the opportunity to use and operate the test instruments.

The course concludes with a Q&A session giving those attending the chance to ask individually questions and seek clarification and guidance on all electrical issues.

This course is aimed at those with basic electrical knowledge who are new to portable appliance testing and require an introduction to PAT with a portable appliance tester. Those who have recently purchased a tester or need further information prior to purchasing would be ideal candidates for this course.

The duration of the course is 4 hours.

This is only available to UK Mainland Customers.

 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1602&product=Fluke_TP220_SureGrip™_Industrial_Test_ProbesFluke TP220 SureGrip™ Industrial Test Probes

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Features:

• One pair (red, black) of Industrial test probes
• Sharp, 12 mm stainless steel tip provides reliable contact
• Flexible finger barrier improves grip
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed
• One year warranty
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1601&product=Fluke_TL75_Hard_Point_Test_Lead_SetFluke TL75 Hard Point Test Lead Set

Features:

• One pair (red, black) of comfort grip probes
• 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
• One year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1600&product=Fluke_TL71_Test_Lead_SetFluke TL71 Test Lead Set

Features:

• One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
• Recommended for µV measurements
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
• One year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1598&product=Fluke_2042T_Spare/Additional_TransmitterFluke 2042T Spare/Additional Transmitter
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1595&product=Fluke_TLK291_Fused_test_probe_setFluke TLK291 Fused test probe set

Provides firm and secure contact

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1593&product=Fluke_TL81A_Deluxe_Electronic_Test_Lead_SetFluke TL81A Deluxe Electronic Test Lead Set

The TL81 kit consists of a quadfold nylon pouch containing two each (one black and one red) of the following items:

• One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures
• Insulated alligator clip rated up to 5A
  Insulated probe tip extender rated up to 3A
• Modular test probe with banana connector in the handle, rated up to 10A
• Modular hook-style clip test lead with banana connector, rated up to 5A
• Modular pinch-style clip test lead with banana connector, rated up to 5A
• Modular alligator clip with banana connector, rated up to 5A
• Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers
• Bare spade lug with banana connector, rated up to 10A
• CAT III 300V
• Compatible with Fluke and other multimeters that accept safety shrouded, standard diameter banana connectors
• UL approved
• One year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1592&product=Fluke_TL76_All-in-one_Test_Lead_SetFluke TL76 All-in-one Test Lead Set

Features:

• One pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plug
• Lantern tip (removable) for use with European wall sockets (4 mm Ø )
• Lantern tip can be removed for easy access to terminal blocks (2 mm Ø)
• Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38.
• Cat IV 600 V, CAT III 1000 V, 10 A rating, UL listed
• One year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1591&product=Fluke_TL28A_Automotive_Test_Lead_SetFluke TL28A Automotive Test Lead Set

Large jaws, long leads and a piercing needle inside the jaws. Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth. Large piercing needle for penetrating larger gauge wires located inside the jaws. 1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F). Rated for 30 V, 10 A. One red, one black.

Features:

• Flexible silicone insulated leads are heat and cold resistant
• Cat I 30 V, 10 A
   
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1590&product=Fluke_TL27_Heavy_Duty_Test_Lead_SetFluke TL27 Heavy Duty Test Lead Set

Features:

• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
• Heavy duty EPDM insulation
• Length 1.5 m
• CAT III 1000 V, 10 A rating. UL listed
• One year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1589&product=Fluke_TL238_SureGrip™_Test_Lead_Set_for_High_Energy_EnvironmentsFluke TL238 SureGrip™ Test Lead Set for High Energy Environments

An accessory kit especially designed for working in high energy enviroments. The SureGrip™ Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertant shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5 cm (8").

What's included:

TP238 SureGrip™ Insulated Test Probe Set
TP280 SureGrip™ Test Probe Extender
TL224 SureGrip™ Silicone Right Angle/Straight Test Lead Set

TP238 and TL224 conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, 600V CAT IV, Pollution Degree 2, 10A

Probe extenders conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, Pollution Degree 2, 10A

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1588&product=Fluke_TL224_SureGrip™_Silicone_Test_Lead_SetFluke TL224 SureGrip™ Silicone Test Lead Set

Fluke SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Features:

• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
• Right angle connector on one end and straight connector on the other
• Reinforced strain relief
• 1.5 meter silicone-insulated wire resists heat & cold
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
• One year warranty
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1586&product=Fluke_H6_Infrared_Thermometer_Holster_Fluke H6 Infrared Thermometer Holster

Features:

• Durable nylon construction protects your thermometer while keeping it within reach
• Cuff hook attachment closure provide quick access and a secure closure
• Extra accessory pocket for storing temperature probe
• Snap-open loop attaches easily to your belt
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1585&product=Fluke_EXTL100_Extension_lead_test_adapterFluke EXTL100 Extension lead test adapter

Adapter for easy testing of extension leads.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1582&product=Fluke_CXT170_Extreme_CaseFluke CXT170 Extreme Case

Features:

• Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof
• Buoyancy allows case to float in salt water with 3.6 kg (7.94 lb) load
• Includes an automatic purge valve for quick equalization after changes in atmospheric pressure
• Features an exclusive 6.4 mm (0.25 in) neoprene O-ring and ABS latches for excellent seal
• For use with the following test tools:
   Air Quality: 922
   Insulation Testers: 1503, 1507, 1577, 1587
   Multimeters: 77 III, 77 IV, 114, 115, 116, 117, 177, 179
   Process Tools: 712, 714, 715, 717, 718, 787
   Temperature: 51, 51-2, 52, 52-2, 53, 53-2, 54, 54-2
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1579&product=Fluke_C35_Soft_Carrying_CaseFluke C35 Soft Carrying Case

Features:

• Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool.
• Durable polyester 600D case construction for long life
• Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools
• One-year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1576&product=Fluke_C23_Soft_Carrying_CaseFluke C23 Soft Carrying Case

Features:

• Zippered carrying case with durable vinyl exterior
• Has belt loop and an inner pocket to store test leads or small accessories
• Ideal companion case to:
   Fluke 61 & 65 Infrared Thermometers
   Fluke 320 series Clamp Meters
• 1 year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1575&product=Fluke_AC89_Heavy_Duty_Insulation_Piercing_Test_ClipFluke AC89 Heavy Duty Insulation Piercing Test Clip

Features:

• Single probe pierces 0.25 to 1.5 mm insulated wire
• Small pin allows self-healing of the insulation
• CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed
• One year warranty
  
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1574&product=Fluke_AC87_Heavy_Duty_Bus_Bar_Clip_SetFluke AC87 Heavy Duty Bus Bar Clip Set

Features:

• One pair (red, black) of flat, right angle design for connecting to bus bars
• Adjustable collar provides 2 ranges of jaw openings up to 30 mm
• CAT III 600 V, 5 A rating. UL listed
• One year warranty
]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1573&product=Fluke_AC285_SureGrip™_Alligator_Clip_SetFluke AC285 SureGrip™ Alligator Clip Set

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Features:

One pair (red, black) of large alligator clips with nickel-plated steel jaws
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V; CAT III 1000 V, 10 A rating, CCSAUS Rating EN/IEC 61010-031:2002 +A1:2008
One year warranty


 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1572&product=Fluke_AC220_SureGrip™_Alligator_Clip_SetFluke AC220 SureGrip™ Alligator Clip Set

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Features:

One pair (red, black) of small, insulated, nickel plated jaws
Blunt tip grabs round screw heads up to 9.5 mm
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty
 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1571&product=Amprobe_DM-II_Plus_Power_Analyser_with_Data_LoggerAmprobe DM-II Plus Power Analyser with Data Logger

The Amprobe DM-II PLUS is a full-featured three phase power quality recorder used to maintain, diagnose andtroubleshoot electrical systems. It measures and records a broad spectrum of power quality parameters. Easy to use, it’s capable of measuring and recording voltage, current, voltage anomalies (sags or surges), harmonics, energy and power (active, reactive and apparent), power factor (true and displacement), and frequency.

This unique product comes as a complete kit with current transducers and an increased memory size for data storage, larger display size, and real-time downloading using Amprobe's unique download suite software.

Features:

• AC Current up to 1000A, AC voltage, active, reactive and apparent power, energy, peak demand & power factor
• All readings are True-rms
• 5 built-in selectable languages: English, French, Italian, German and Spanish
• User selectable rates allow recording from one hour to several months
  Works with single & three phase systems (Y & delta)
• Readings and charts can be viewed on the DM-II LCD screen or downloaded to a PC
• Capable of recording all parameters (single or three phase) simultaneously
• Optional transducers available for 100A and 3000A (flexible) current capability

 

What's included:

DM-II, external power supply,3 clamp meters 1000 A/1 V, voltage test leads,PC software and USB cable, users manual

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1570&product=Amprobe_TX900_Microwave_Leakage_DetectorAmprobe TX900 Microwave Leakage Detector

The Amprobe TX900 Microwave Leakage Detector has been designed to assist domestic and commercial appliance engineers with microwave ovens. The Amprobe TX900 can be used to verify if the oven operates in accordance with current standards and regulations.

Features:

• Measures for wave leakage and tests oven power
• 8 dipole sensors – allows detection of plane wave signals of any polarization
• Temperature compensation – accurate reading regardless of ambient temperature changes
• Compact, ergonomic design
• Low battery indication
• Analog Bar Graph
• Auto-zero
• Accessories supplied: Two 500 ml Plastic Beakers, Spirit

What's included:

TX900, 2 x 500 ml plastic beakers, spirit (Alcohol), glass thermometer, battery (installed), carrying case, user manual

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1569&product=Amprobe_MT-10_Moisture_MeterAmprobe MT-10 Moisture Meter

Measure moisture content for wall board, wood or other building materials to determine places of harmful mold growth or unseen water damage.

Typical application also include checking moisture of concrete slab and wood before installation of floors, determining wood moisture content during drying process, and checking wood moisture before material is used for woodworking applications.

Features:

• Checks for moisture content in wood, paper or cardboard and building materials such as sheetrock, concrete, mortar, plaster, etc.
• Measurement ranges: Wood/ Paper: 8 ~ 60%
• Building material: 0.3 - 2.0% Temperature: 0°C ~ 40°C or 32°F ~ 99°F
• Used in indoor air quality applications for detecting moisture in the walls, floors and ceilings stimulating mold growth
• LCD display provides moisture or temperature measurement
• Three color LED provides quick moisture indication:
  Green - air-dry conditions
  Yellow - increased moisture
  Red - excess moisture
• Backlight for operation in dark areas
• Low battery indication
• Auto power off

 

What's included:

MT-10, users manual, battery

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1568&product=Amprobe_TMD-56_Multi-logging_Digital_Thermometer_with_.05%_Basic_AccuracyAmprobe TMD-56 Multi-logging Digital Thermometer with .05% Basic Accuracy

The Amprobe TMD-56 Thermometer offers multi-logging capabilities to monitor and track temperatures along with a USB computer download feature. This model with dual inputs allows for easy super-heat and sub-cool temperature measurement as well as cut-out and in temperature measurements.

Features:

• Backlit triple-display
• Built in memory: 16 sets, Maximum 16000 data points
• Data-logging:256 samples with real-time data per channel
• Easy Data Recall with up and down key: T1, T2, T1-T2, Time and Memory Location
• Thermocouple Offset Adjustment
• REC, MAX, MIN, MAX-MIN, Average, Relative Zero and HOLD functions
• Resolution 0.1°C/1°C, 0.1°F/1°F
• Warning beeper with Hi/Lo setting
• User selectable recording interval
• Real time clock with calendar

What's included:

USB wireless module, USB cable and software CD, user manual, 2-k type thermocouple, batteries (installed)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1567&product=Amprobe_TMD-53_Thermocouple_Thermometer_K/J-TypeAmprobe TMD-53 Thermocouple Thermometer K/J-Type

The Amprobe TMD-53 thermometer is a perfect choice for HVAC/R technicians and electricians, as well as research, industrial process, and quality control applications. The dual inputs allow easy super-heat and sub-cool temperature measurement as well as cut-out and in temperature measurements.

Features:

• K/J-type thermocouple selection
• Dual input
• MAX/MIN with elapsed time, AVG, REL, HOLD functions
• TIME setting, REL setting
• Warning beeper with Hi/Lo setting
• Resolution 0.1°C to 0.2°F
• User selectable °C/°F

What's included:

USB wireless module, users manual, 2-k type thermocouple, batteries (installed)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1566&product=Amprobe_TMD-50_Thermocouple_Thermometer_K-typeAmprobe TMD-50 Thermocouple Thermometer K-type

The Amprobe TMD-50 Thermometer is the professional choice for HVAC technicians, electricians, research, industrial process, and quality control, these thermometers offer dual inputs for easy super-heat and sub cool temperature measurements.

To monitor and track temperatures, the multi-logging thermometers feature real-time clocks with calendar, user-selectable recording intervals, and easy data recall using up and down keys.

Features:

• Highly accurate thermometer with 0.1% basic accuracy for precise measurements
• Dual input T1, T2, T1-T2
• Large, backlit easy to read display
• In-field thermocouple offset adjustment
• °C/°F selection
• Robust protective Holster
• Auto-Power Off
• MIN/MAX/HOLD functions
• Average /Relative Zero Functions

What's included:

Users Manual, 2-type k thermocouple, 4 batteries (installed)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1565&product=Amprobe_ULD-300_Ultrasonic_Leak_DetectorAmprobe ULD-300 Ultrasonic Leak Detector

When leaks occur they often generate an ultrasonic frequency that is beyond human hearing. Amprobe’s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurized air lines, refrigeration systems, and steam lines for leaks. Quickly and easily locate a leak location with this unique device.

Features:

Detects the ultrasonic noise created by pressure or vacuum leaks of any gas, regardless of type: CFC's, HFC's, Nitrogen, CO2, Steam, etc.
Unaffected by contaminants, or windy conditions
Identifies failing solenoids, valves and bearings
Includes headphones, extension tube, parabola (reflector
Audible & Visual Leak Indicators
Battery condition indicator

What's included:

Flexible tubing adapter, tubular extension, carrying case, power parabola, headphone, batteries(installed)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1564&product=Amprobe_TMULD-300_Ultrasonic_Leak_Detector_with_TransmitterAmprobe TMULD-300 Ultrasonic Leak Detector with Transmitter

When leaks occur they often generate an ultrasonic frequency that is beyond human hearing. Amprobe’s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurized air lines, refrigeration systems, and steam lines for leaks.

Quickly and easily locate a leak location with this unique device. The TMULD-300 includes an ultrasonic transmitter that is great to use in areas where leaking gases are not sufficiently pressurized. Check for door or trunk seals, windshield leaks. The transmitter creates ultrasonic sound waves for detecting cracks and leaks.

Features:

The UT-300 transmits an ultrasonic signal for non pressurized applications
Tests the “air-tightness” of weather seals, tanks, ovens, refrigerators, etc.
Locating leaks in duct work
Finds the ends of buried PVC pipes
Detects any pressurized gas leak regardless of type CFC’s, HFC’s, Nitrogen, etc. (unaffected by contaminants)

What's included:

Flexible tubing adapter, tubular extension, carrying case, power parabola, head phones, batteries (installed) UT-300 transmitter

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1563&product=Amprobe_AT-5005_Professional_Underground_Cable_and_Pipe_Locator_System_Amprobe AT-5005 Professional Underground Cable and Pipe Locator System

 Buried utilities represent a major challenge to electricians who need to trace and trouble shoot such systems. They also represent a hazard to excavation crews. Improperly performed digging can cause cable or pipe damage resulting in personal injury, costly repairs and penalties. This product is faster and more accurate than what’s available on the market today.

The Signal Select and Distortion Alert provide superior accuracy by visually indicating a clean signal of the traced line, versus “ghost and ‘return’ path of false signals coming from the neighboring lines, and keeping the user on the target line.

Features:

• Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires
• New technology makes tracing much faster, accurate and unambiguous when compared to standard locators
• Signal select and distortion alert icon indicates clean signal of the traced line, versus “ghost and ‘return’ path signals coming from the neighboring lines
• Forward-looking guidance coil alerts for bends and “T
• Distance sensitive left/right guidance guides the user to the exact location of the buried utilities and eliminates "blind" searches for the line
• Three testing modes for best accuracy:
  - Passive power mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current
  - Passive radio mode (RF) – using surrounding radio waves to traceunderground object
  - Active mode - T-5000 signal generator with broad frequency selection between 491 Hz and 166 kHz with induction mode or directly connected to the cable with test leads or optional clamp
• Active mode depth measurement up to 20’ (6m)
• Bright color ¼ VGA receiver graphical display and audible signal indicators provide clear reading to the user
• Strong testing signal generated by 10 watt variable output transmitter for dependable depth and distance locating
• Powerful digital signal processing in both receiver and transmitter provides outstanding performance in tracing when compared to analog devices
• Automatic or manual gain mode allows respectively quick and easy tracing of the line or precise pinpointing of the fault
• Receiver Bluetooth® wireless communication for downloading relevant images and archiving of meaningful digital information (previous survey results)
• Ground fault locating with A-Frame adapter for power and telecom cables (optional for AT-5000)
• Precise pinpointing of buried services and exceptionally fast sound and meter response
• Rugged durable construction, weatherproof and drop resistant to 3’

 

What's included:

Receiver (R-5000), transmitter (T-5000), connection cable, ground stake, ground cable, and carrying case and A-Frame]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1562&product=Amprobe_AT-5000_Professional_Underground_Cable_and_Pipe_Locator_SystemAmprobe AT-5000 Professional Underground Cable and Pipe Locator System

Buried utilities represent a major challenge to electricians who need to trace and trouble shoot such systems. They also represent a hazard to excavation crews. Improperly performed digging can cause cable or pipe damage resulting in personal injury, costly repairs and penalties. This product is faster and more accurate than what’s available on the market today.

The signal select and distortion alert provide superior accuracy by visually indicating a clean signal of the traced line, versus “ghost and ‘return’ path of false signals coming from the neighboring lines, and keeping the user on the target line.

Features:

• Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires
• New technology makes tracing much faster, accurate and unambiguous when compared to standard locators:
• Signal select and distortion alert icon indicates clean signal of the traced line, versus “ghost and ‘return’ path signals coming from the neighboring lines
• Forward-looking guidance coil alerts for bends and “T
• Distance sensitive left/right guidance guides the user to the exact location of the buried utilities and eliminates “blind searches for the line
• Three testing modes for best accuracy:
  - Passive power mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current
  - Passive radio mode (RF) – using surrounding radio waves to traceunderground object
  - Active mode - T-5000 signal generator with broad frequency selection between 491 Hz and 166 kHz with induction mode or directly connected to the cable with test leads or optional clamp
• Active mode depth measurement up to 20’ (6m)
• Bright color ¼ VGA receiver graphical display and audible signal indicators provide clear reading to the user
• Strong testing signal generated by 10 watt variable output transmitter for dependable depth and distance locating
• Powerful digital signal processing in both receiver and transmitter provides outstanding performance in tracing when compared to analog devices
• Automatic or manual gain mode allows respectively quick and easy tracing of the line or precise pinpointing of the fault
• Receiver Bluetooth® wireless communication for downloading relevant images and archiving of meaningful digital information (previous survey results)
• Ground fault locating with A-Frame adapter for power and telecom cables (optional for AT-5000)
• Precise pinpointing of buried services and exceptionally fast sound and meter response
• Rugged durable construction, weatherproof and drop resistant to 3’

 

What's included:

Receiver (R-5000), transmitter (T-5000), connection cable, ground stake, ground cable, and carrying case]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1561&product=Amprobe_AT-3500_Underground_Cable_and_Pipe_LocatorAmprobe AT-3500 Underground Cable and Pipe Locator

Keep productivity high and operational costs low, with the Amprobe AT-3500 Underground Cable and Pipe Locator System. It’s the rugged, economical solution for locating underground energized and de-energized wires, cables and pipes. Great for parking lot and airport lighting applications, it precisely pinpoints buried services, with exceptionally fast sound and meter response.

The backlit, multiple-segment, bar-graph, digital display plus audible indicators show and tell. The AT-3500 employs the proven 33 kHz frequency for most locating applications. To avoid lines at utility construction sites, it also offers the highly sensitive power and radio modes. Take depth measurements with the press of a button.

Features:

• Locates underground energized and de-energized wires, cables and pipes
• Three testing modes for best accuracy
  – Passive power (50/60 Hz)
  – Passive radio (RF)
  – Active T-3500 signal generator with induction mode directly connected to the cable with test leads or optional clamp
• Active mode depth measurement up to 16’ (4.9m)
• Semi-automatic gain control – fast signal location and control
• 33 kHz active frequency – best frequency for general locating
• Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple multiple-segment
• Complete instrument, ready for use with receiver, transmitter, connection cable, ground stake and ground cable

 

What's included:

Receiver, transmitter, connection cables, ground stake, carrying case, users manual, batteries(installed)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1559&product=FLIR_i3_Thermal_Imaging_Camera_+_Amazon_WiFi_Kindle_BundleFLIR i3 Thermal Imaging Camera + Amazon WiFi Kindle Bundle

 

 

FLIR i3 Thermal Imaging Camera

Features and Specification as per standalone i3 product. Also includes Free FLIR Thermal Imaging Booklet.

 

Amazon WiFi Kindle Bundle

Lighter, More Compact Than Ever

Less than 170 grams. Lighter than a paperback, fits in your pocket.

Holds Up To 1,400 Books

Keep your library with you wherever you go.

Most Advanced E Ink Display

Kindle's high-contrast E Ink display delivers clear, crisp text and images.

Read in Bright Sunlight

Kindle's E Ink screen reads like real paper, with no glare. Read as easily in bright sunlight as in your living room.

One Month Battery Life

No battery anxiety - read for up to one month on a single charge.

Books in 60 seconds

Find a book and start reading in seconds with our fast, free wireless delivery.

Simple to Use

Kindle is ready to use right out of the box - no setup, no software to install, no computer required to download content.

Adjustable Text Sizes

Read comfortably with eight different sizes and three font styles.

Faster Page Turns

Kindle's powerful processor is tuned for fast, seamless page turns.

PDF and Personal Documents

Email personal documents and PDFs direct to your Kindle to read and annotate on-the-go. Massive Selection

Over 900,000 books, newspapers, and magazines, including latest bestsellers, Kindle exclusives and more.

Low Book Prices

We check hundreds of prices every day to make sure our prices are the lowest of any ebook store in the UK. Compare our book prices--you'll like what you find.

Free Books

More than one million free books, such as Pride and Prejudice and Treasure Island are available. Learn More

Free Book Samples

Download and read first chapters for free before you decide to buy.

Free Cloud Backup

We automatically back up your library in the cloud, so you never need to worry about losing your books. Re-download wirelessly anytime for free.

Buy Once, Read Everywhere

Kindle books can be read on your Kindle, iPhone, iPad, Android devices, Windows Phone 7, Mac, or PC with our free Kindle Reading Apps.

Built-in Dictionary with Instant Lookup

Seamlessly look up definitions of over 250,000 English words without interrupting your reading.

Whispersync

Our Whispersync technology synchronizes your last page read, bookmarks and annotations across your devices so you can always pick up where you left off.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1558&product=Megger_1000-362_Cable_Reel_30m_Green_(for_Professional_Earth_Test_Kit)Megger 1000-362 Cable Reel 30m Green (for Professional Earth Test Kit)

30m green cable reel for use with Megger 6320-245 Professional Earth Test Kit.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1557&product=Megger_1000-361_Cable_Reel_30m_Yellow_(for_Professional_Earth_Test_Kit)Megger 1000-361 Cable Reel 30m Yellow (for Professional Earth Test Kit)

30m yellow cable reel for use with Megger 6320-245 Professional Earth Test Kit.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1556&product=Megger_1000-350_Cable_Reel_50m_Black_(for_Professional_Earth_Test_Kit)Megger 1000-350 Cable Reel 50m Black (for Professional Earth Test Kit)

50m black cable reel for use with Megger 6320-245 Professional Earth Test Kit.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1555&product=Megger_1000-349_Cable_Reel_50m_Red_(for_Professional_Earth_Test_Kit)Megger 1000-349 Cable Reel 50m Red (for Professional Earth Test Kit)

50m red cable reel for use with Megger 6320-245 Professional Earth Test Kit.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1554&product=Megger_6320-245_Professional_Earth_Test_KitMegger 6320-245 Professional Earth Test Kit

Electrode & Soil Resistivity stake and wire kit.

Can be used with any of the DET3 or DET4 Megger earth testers

• Easy wind reels
• Easy use, easy pack away
• Auger style spikes
• Tough storage case

 

The Megger Professional Earth Test Kit is designed to be as practical as possible. Housed in a tough polyethylene carry case, the kit is stored neatly, well-protected and easy to transport. In use the reels are fitted and retained on the spike handles, simply run out the test lead to the instrument and plug in, plug the other end directly into the spike, and test, easy. When the test is complete, unplug the test leads and wind them in, whilst still on the spike.

Auger Style Spikes

• Easy to twist into the ground.
• Easy to determine insertion depth.
• Test leads simply plug in.
• Knurled screw for connection of bare wire test cables.

 

Unique test lead cleaning brush mechanism

• Brush cleans debris off test leads as you wind them in
• Reduces likely hood of test lead tangles
• Less likely to “birds nest” when running out test leads.

 

What's included:

• Cable reel – 50m red
• Cable reel - 50m black
• Cable reel – 30m yellow
• Cable reel – 30m green
• Earth electrode lead – 4m green, 4mm shrouded plug and large croc clip
• Auger style spikes – 4 off
• 50m Fibreglass measuring tape
• Carry case – moulded polyethylene

 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1553&product=Megger_1001-991_3-Lead_Red_Green_Blue_Unfused_Large_TipMegger 1001-991 3-Lead Red Green Blue Unfused Large Tip]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1552&product=Megger_6220-810_SIA10_Socket_Interface_Adaptor_UK_to_3x4mmnewavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1551&product=Megger_1001-977_Fused_10A_Test_Lead_Set_with_Prods_and_Clips_Right_Angle_PlugsMegger 1001-977 Fused 10A Test Lead Set with Prods and Clips Right Angle Plugs

Replaces 6220-827

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1548&product=FLIR_i7_Thermal_Imaging_CameraFLIR i7 Thermal Imaging Camera

With FREE FLIR Thermal Imaging Booklet!

For an interactive demo of the i5 Thermal Camera, please click here.

Features:

Fully automatic
Produces instant, point-and-shoot JPEG thermal imagery that carries all required temperature data and can be stored internally or externally, sent and analyzed.

Focus free
The fixed focus free lens makes using the FLIR i5/i7 a snap.

SD card storage
Stores images with unique ID in radiometric JPEG format, containing all temperature data on a standard miniSD card. USB file transfer to PC.

Reporting and analysis software included
FLIR QuickReport software is included and the camera is also compatible with the more powerful FLIR Reporter.

Outstanding measurement/accuracy
High accuracy of ±2°C or ±2% produces sensitive thermal images for general purpose maintenance analysis. Measures temperatures up to +250°C and detects temperature differences as small as 0.10°C.

Measurement functions
Spotmeter, box with max./min. temperatures, isotherm above/below (depending on model).

Technical Data:

• Field of view/min focus distance: 25° x 25°/0.6 m
• IR Resolution: 120 x 120 pixels
• Thermal sensitivity: 0.10°C
• Measurement modes: Center Spot, box with max./min. temp., isotherms above/below selected temperature interval

 

Imaging performance
Spectral range: 7.5 - 13 µm
Spatial resolution (IFOV): 3.71 mrad
Image Frequency: 9 Hz
Focus: Fixed
Focal Plane Array (FPA): Uncooled microbolometer

Image Presentation
Display : 2.8" color LCD

Measurement
Object temperature range: -20°C to +250°C
Accuracy: ±2 °C or ±2% of reading

Measurement analysis
Emissivity correction: Variable from 0.1 to 1.0 or selected from list of materials
Reflected apparent temperature correction: Automatic, based on input of reflected temperature

Setup
Color palettes: Iron, Rainbow and Black/White
Set-up controls: Local adaptation of units, language, date and time formats; automatic shutdown , display intensity
 
Image Storage
Type: MiniSD card
File format: Standard JPEG - 14 bit measurement data included
 
Power
Battery Type: Li-lon rechargeable
Battery operating time: 5 hours , display shows battery status
Charging system: In camera, AC adaptor; 3 hours to 90% capacity
AC operation: AC adaptor 90-260 VAC input
Power management: Automatic shutdown (user selectable)
Adaptor voltage: 5 VDC out
 
Environmental specificatons
Operating temperature range: 0°C to +50°C
Storage temperature range: -40°C to +70°C
Humidity: Operating and storage IEC 60068-2-30/24 h 95% relative humidity
Shock: 25G, IEC 60068-2-29
Vibration: 2G, IEC 60068-2-6
Encapsulation: Camera housing and lens: IP43
 
Physical characteristics
Dimensions: 223 x 79 x 83 mm
Weight: <340g, including battery
Shipping size: 120 x 400 x 320 mm
Shipping weight: 2.8 kg

What's included:

FLIR i7 thermal imaging camera, FLIR QuickReport CD, Printed Getting Started Guide, User documentation CD-ROM, Calibration certificate, Hand strap, Battery (inside camera), Power supply charger with EU, UK, US and Australian plugs, USB cable, miniSD card (512 MB) with SD card adaptor

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1547&product=CK_T49193_DextroVDE_Screwdriver_SLP/PZD_Set_Of_8CK T49193 DextroVDE Screwdriver SLP/PZD Set Of 8

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blades, hardened and tempered for optimum performance. Grip tip technology to reduce the risk of cam out and slipping (excl 2.5x75 & PZ0x60). Ergonomically shaped dual component handles with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handles for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. Convenient storage case.

What's included:

Contains slotted 2.5x 75, 4x100, 5.5x125, 6.5x150, PZ0x60, PZ1x80, PZ2x100, mainstester

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1546&product=CK_T49183_DextroVDE_Screwdriver_Slotted_Parallel_&_PZD_Set_Of_6CK T49183 DextroVDE Screwdriver Slotted Parallel & PZD Set Of 6

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blades, hardened and tempered for optimum performance. Grip tip technology to reduce the risk of cam out and slipping (excl 2.5x75). Ergonomically shaped dual component handles with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handles for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. Convenient storage case.

What's included:

Contains slotted 2.5x 75, 4x100, 5.5x125, PZ1x80, PZ2x100, mainstester

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1545&product=CK_T49144-040_DextroVDE_Screwdriver_Slotted_Parallel_4.0x100mmCK T49144-040 DextroVDE Screwdriver Slotted Parallel 4.0x100mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blade, hardened and tempered for optimum performance. Grip tip technology to reduce the risk of cam out and slipping. Ergonomically shaped dual component handle with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handle for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1544&product=CK_T49144-035_DextroVDE_Screwdriver_Slotted_Parallel_3.5x100mmCK T49144-035 DextroVDE Screwdriver Slotted Parallel 3.5x100mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blade, hardened and tempered for optimum performance. Grip tip technology to reduce the risk of cam out and slipping. Ergonomically shaped dual component handle with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handle for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1543&product=CK_T49144-030_DextroVDE_Screwdriver_Slotted_Parallel_3.0x100mmCK T49144-030 DextroVDE Screwdriver Slotted Parallel 3.0x100mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blade, hardened and tempered for optimum performance. Grip tip technology to reduce the risk of cam out and slipping. Ergonomically shaped dual component handle with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handle for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1542&product=CK_T49144-025_DextroVDE_Screwdriver_Slotted_Parallel_2.5x75mmCK T49144-025 DextroVDE Screwdriver Slotted Parallel 2.5x75mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blade, hardened and tempered for optimum performance. Ergonomically shaped dual component handle with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handle for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1541&product=CK_T49143-2_DextroVDE_Screwdriver_PZD2x100mmCK T49143-2 DextroVDE Screwdriver PZD2x100mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Features: Premium quality chrome molybdenum/vanadium steel blade, hardened and tempered for optimum performance. Grip tip technology to reduce the risk of cam out and slipping. Ergonomically shaped dual component handle with long fine neck for precise fingertip control and ridges along the head for extra grip in the last quarter turn. Tip type marking on the end of the handle for easy identification. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved

 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1540&product=CK_T39071-3180_RedLine_CombiCutter3_Max_180mmCK T39071-3180 RedLine CombiCutter3 Max 180mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Wire stripping notches for effortless and damage free stripping of 1.5 and 2.5mm2 wire. Wire bending anvil for quick and damage free doubling back of copper wire. Patress screw shear for damage free cutting of 3.5 and 4mm screws. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1539&product=CK_T39071-1180_RedLine_CombiCutter1_Max_180mmCK T39071-1180 RedLine CombiCutter1 Max 180mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Patress screw shears for damage free cutting of 3.5 and 4mm screws. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1538&product=CK_T3659A_300_Water_Pump_Pliers_300mmCK T3659A 300 Water Pump Pliers 300mm

Drop forged chrome vanadium steel construction combined with a box joint design offers high strength and durability. 7 position adjustment. Parallelogram shaped jaws offer a powerful grip on smooth and irregular materials. Slim head and jaws for use in confined spaces. PVC coated handles for grip and comfort.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1537&product=CK_T4729_Triton_XLS_Insulated_Screwdriver_-_5_Piece_SetCK T4729 Triton XLS Insulated Screwdriver - 5 Piece Set

Tip type marking for easy identification. Large soft grip tri-lobe handle for exceptional comfort and high torque turns. Handle injection moulded directly to blade giving the ultimate bond for increased reliability and durability. Anti roll flats to prevent the screwdriver rolling off sloping surfaces. Toughened alloy steel blade for excellent durability. Precision machined tips to reduce the risk of tip breakage. Conform to EN60900:2004 tested to 10,000v. Safe for live working up to 1000v.

What's included:

SL/PH contains Slotted parallel 2.5x75, 4x100, 5.5x125, PZ1x80, PZ2x100

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1536&product=CK_T3963_240_Cable_Cutters_240mmCK T3963 240 Cable Cutters 240mm

Drop forged high alloy steel construction with razor sharp, induction hardened cutting edges offering efficient long term cutting performance. The specially profiled blades are designed for stripping and cutting a wide range of cables including aluminium, copper and plastic sheathed up to 13mm diameter.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1535&product=CK_T3963_Cable_Cutters_210mmCK T3963 Cable Cutters 210mm

Drop forged high alloy steel construction with razor sharp, induction hardened cutting edges offering efficient long term cutting performance. The specially profiled blades are designed for stripping and cutting a wide range of cables including aluminium, copper and plastic sheathed up to 11mm diameter.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1534&product=CK_T3676_Ratchet_Crimping_Pliers_For_Bell_Mouth_Ferrules_6-25mmCK T3676 Ratchet Crimping Pliers For Bell Mouth Ferrules 6-25mm

Designed for the safe and secure crimping of bell mouth ferrules to wire sized between 6 and 25mm². Featuring: Heavy duty body construction with hardened steel jaws - guaranteed for up to 30,000 cycles. Factory set crimp pressures for the optimum connection safety. Full cycle ratchet mechanism for safe, repeatable results and comfortable ergonomic handles.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1533&product=CK_T3659A_240_Water_Pump_Pliers_250mmCK T3659A 240 Water Pump Pliers 250mm

Drop forged chrome vanadium steel construction combined with a box joint design offers high strength and durability. 7 position adjustment. Parallelogram shaped jaws offer a powerful grip on smooth and irregular materials. Slim head and jaws for use in confined spaces. PVC coated handles for grip and comfort.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1532&product=CK_T2943-25_Fast4_Wood_Drill_Bit_25mmCK T2943-25 Fast4 Wood Drill Bit 25mm

4 blades offering faster waste removal and 100% more cutting blade than a flat or auger bit. Cutting edges ground with spur blades for clean hole profile and breakout. Screw point allows accurate positioning and pulls the bit through with less effort. Class leading cutting speeds. Hex drive shaft with fast change docking facility.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1531&product=CK_T1634_Tool_Systems_Tool_ToteCK T1634 Tool Systems Tool Tote

Large open topped tote for carrying tools. 100% waterproof and crackproof rubberised base. Roll-away cover for protection. The strong rigid handle, detachable for easy access, can be used as a cable reel dispenser. 32 Separate pockets and straps for tools. Padded pocket for sensitive equipment. Reinforced knife pocket. Padded detachable shoulder strap. Metal tape clip. Durable polyester construction.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1530&product=CK_T1632_Tool_Systems_Technicians_Tool_Case_PlusCK T1632 Tool Systems Technicians Tool Case Plus

Our most rugged Technician's Tool Case ever which offers outstanding protection for tools, manuals and sensitive electronic equipment. 100% waterproof and crackproof rubberised base. soft, comfortable carry handle. Detachable padded shoulder strap. Heavyweight zips and reinforced stitching. 50 internal and external pockets / straps. The padded central compartment offers excellent protection for a laptop. 2 separate side compartments for tools. 2 internal document pockets. Reflective strip for visibility. Durable polyester construction.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1529&product=CK_T1631_Tool_Systems_Technicians_RucksackCK T1631 Tool Systems Technicians Rucksack

For tradespeople on the move. 48 pockets and holders including 2 fold out panels for easy tool access. Padded central laptop section. Mobile phone holder. Internal and external document pockets. Meter pocket. Reflective strip for visibility. Durable polyester construction.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1528&product=CK_T1630_Tool_Systems_Technicians_Tool_CaseCK T1630 Tool Systems Technicians Tool Case

This award winning case offers protection for tools, manuals and sensitive electronic equipment. 50 internal and external pockets. The padded central compartment offers excellent protection for a laptop. Separate side compartments for tools. Two internal zipped document pockets. Detachable padded shoulder strap. Reflective strip for visibility. Durable polyester construction.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1527&product=CK_T0957_Trimming_Knife_Soft_Grip_RetractingCK T0957 Trimming Knife Soft Grip Retracting

Heavy duty die cast aluminium handle with safety interlocking joint and soft grip handle for comfort and control. Retractable blade for safe storage. Magnetic blade retainer and captive body screw for fast and convenient blade changes. String/wire cutting notch for convenience.

What's included:

Supplied with 10 heavy duty C.K blades in a safety dispenser.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1526&product=CK_T0831_Plasterboard_Saw_CK T0831 Plasterboard Saw

Induction hardened coarse ground cutting teeth and pointed blade - Designed for fast cutting of  holes in plasterboard for sockets and conduits. (Also known as a dry wall saw)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1525&product=CK_T0814_Quick_Change_Hacksaw_12CK T0814 Quick Change Hacksaw 12"

Heavy duty premium quality hacksaw with rubber grips for comfort and control. Featuring: Quick release blade change mechanism for convenience. 45 and 900 blade positions.

What's included:

Spare blade storage in back frame for convenience. Complete with top quality cekaflex HSS Bi Metal 24tpi blade.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1524&product=CK_595003_Electrician's_Premium_Tool_KitCK 595003 Electrician's Premium Tool Kit

What's included:

A complete Electrician's tool kit featuring combicutter3TM side cutters and DextroTM screwdrivers, all contained in the award winning C.K technicians toolcase . Contents: Redline VDE Combicutter3 side cutters 165mm, Combination pliers 185mm, Snipe nose pliers 175mm, Dextro VDE Screwdrivers PZ1, PZ2, PH1, PH2, Slotted 2.5x75, 4x100, Modulo Size 2, Junior hacksaw, 5m/16ft ST Tape, Electrician's knife, Automatic wire strippers, Pocket level, VDE Mainstester, Claw hammer & M3.5 Re-threading tool.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1523&product=CK_495033_Punch_Down_ToolCK 495033 Punch Down Tool

For the fast and secure seating of data wires into terminals - automatically seats and trims excess wires during punch down action. Suitable for a wide range of terminal blocks, including KRONE and similar.

What's included:

The handle includes wire extractor hook and spudger.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1522&product=CK_495002_Switch_Key_WrenchCK 495002 Switch Key Wrench

A multipurpose key designed for use on the locking systems of electrical, gas and water cupboards commonly found in industry and on technical equipment in buildings such as air conditioning, stop valves, mains consoles etc. The key is light and strong and comes complete with 6mm bit driver adapter and double ended screwdriver bit.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1521&product=CK_495001_Automatic_Wire_StripperCK 495001 Automatic Wire Stripper

Strips wire in a fraction of the time of traditional tools. Automatically adjusts to give damage free stripping of flat and round wires. Featuring hardened steel blades for a longer life the wire strippers are also equipped with a micro adjustment knob for stripping wires smaller than 0.2mm², strip depth stop, crimping jaws for insulated/non-insulated terminals and wire cutting jaws. 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1520&product=CK_431031_RedLine_VDE_Heavy_Duty_Cable_Shears_210mmCK 431031 RedLine VDE Heavy Duty Cable Shears 210mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for high cutting performance. Shearing action with high leverage handles cuts through larger cables cleanly and effortlessly. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1519&product=CK_431030_RedLine_VDE_Heavy_Duty_Cable_Shears_165mmCK 431030 RedLine VDE Heavy Duty Cable Shears 165mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for high cutting performance. Shearing action cuts through cables cleanly and effortlessly. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1518&product=CK_431014_RedLine_VDE_Snipe_Nose_Pliers_200mmCK 431014 RedLine VDE Snipe Nose Pliers 200mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for high cutting performance. Serrated inside jaws for secure gripping. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5745

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1517&product=CK_431009_RedLine_VDE_CombiCutter2_160mmCK 431009 RedLine VDE CombiCutter2 160mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Wire stripping notches for effortless and damage free stripping of 1.5 and 2.5mm2 wire. Patress screw shear for damage free cutting of 3.5mm patress screws. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1516&product=CK_431008_RedLine_VDE_CombiCutter3_160mmCK 431008 RedLine VDE CombiCutter3 160mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Wire stripping notches for effortless and damage free stripping of 1.5 and 2.5mm2 wire. Wire bending anvil for quick and damage free doubling back of copper wire. Patress screw shear for damage free cutting of 3.5mm patress screws. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1515&product=CK_431007_RedLine_VDE_Heavy_Duty_Side_Cutters_200mmCK 431007 RedLine VDE Heavy Duty Side Cutters 200mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. High leverage design with induction hardened and precision ground cutting edges for unsurpassed cutting performance. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1514&product=CK_431006_RedLine_VDE_Heavy_Duty_Side_Cutters_175mmCK 431006 RedLine VDE Heavy Duty Side Cutters 175mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. High leverage design with induction hardened and precision ground cutting edges for unsurpassed cutting performance. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1513&product=CK_431005_RedLine_VDE_Side_Cutters_180mmCK 431005 RedLine VDE Side Cutters 180mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1512&product=CK_431003_RedLine_VDE_Combination_Pliers_205mmCK 431003 RedLine VDE Combination Pliers 205mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Extra long induction hardened and precision ground cutting edges for high cutting performance. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5746

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1511&product=CK_431002_RedLine_VDE_Combination_Pliers_185mmCK 431002 RedLine VDE Combination Pliers 185mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Extra long induction hardened and precision ground cutting edges for high cutting performance. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5746

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1510&product=CK_430021_Ratchet_Crimping_Pliers_For_Insulated_Terminals_Red,_Blue_&_YellowCK 430021 Ratchet Crimping Pliers For Insulated Terminals Red, Blue & Yellow

Designed for the safe and secure crimping of red, blue or yellow insulated terminals. The C.K ratchet crimping pliers feature: Heavy duty body construction with hardened steel jaws - guaranteed for up to 30,000 cycles. Factory set crimp pressures for the optimum connection safety. Full cycle ratchet mechanism for safe, repeatable results and comfortable ergonomic handles.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1509&product=CK_430007_Ratchet_Cable_Cutters_190mmCK 430007 Ratchet Cable Cutters 190mm

A compact heavy duty cutter with ratchet mechanism for effortlessly cutting cable. Featuring high quality chrome molybdenum profiled steel blade for easy cutting of hard drawn copper, aluminium cable or 200 pair communications cable. Full ratching cycle for easy use. Integral locking mechanism and anti-slip handles for safety. (Not for use on steel armoured cable)

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1508&product=CK_431004_RedLine_VDE_CombiCutter1_160mmCK 431004 RedLine VDE CombiCutter1 160mm

VDE certified and individually tested to 10,000v for complete safety when working on live equipment up to 1000v. Drop forged chrome vanadium steel for strength and durability. Induction hardened and precision ground cutting edges for unsurpassed cutting performance. Patress screw shear for damage free cutting of 3.5mm patress screws. Ergonomic dual component handles offering the perfect balance of grip and comfort. Certified to VDE 0682/201:2005 01 & IEC 60900:2004. GS approved. DIN ISO 5749

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1507&product=CK_430003_Ratchet_Conduit_CuttersCK 430003 Ratchet Conduit Cutters

Heavy duty ratchet action PVC pipe cutters with aluminium body and extra sharp stainless steel blade offers effortless straight cutting of PVC conduit pipes and similar materials e.g. blue water mains plastic pipe, rubber hose, pneumatic pipe, electrical sleeving, etc. Supplied with special adaptor allowing straight or mitre cutting of small rectangular cross-section trunking.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1506&product=CK_430001_PVC_Pipe_CutterCK 430001 PVC Pipe Cutter

A lightweight yet strong glass fibre reinforced body housing a razor sharp stainless steel blade makes this an ideal tool for efficient one handed, straight cutting of PVC conduit pipes and similar materials e.g. blue water mains pipe, rubber hose, pneumatic pipe, electrical sleeving, etc. 

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1505&product=CK_424041_Drill_Bit_For_Hole_Saw_Arbor_424037CK 424041 Drill Bit For Hole Saw Arbor 424037

Replacement HSS pilot drill bit for C.K holesaw arbor 424037

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1504&product=CK_424040_Hole_Saw_Arbor_With_8mm_Shaft_For_32-152mm_Hole_SawsCK 424040 Hole Saw Arbor With 8mm Shaft For 32-152mm Hole Saws

Heavy duty hole saw arbour for use with C.K holesaws from 32mm - 114mm. Fixing pins are locked in place with a screw down collar securing the holesaw for heavy duty use. 11mm hexagonal drive shaft. Supplied with replaceable 1/4˝ HSS pilot drill.


]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1503&product=CK_424039_Hole_Saw_Arbor_With_11mm_Shaft_For_32-152mm_Hole_SawsCK 424039 Hole Saw Arbor With 11mm Shaft For 32-152mm Hole Saws

Quick-release hole saw arbour for use with C.K holesaws from 32mm - 114mm. Fixing pins are spring loaded for easy withdrawal making holesaw changes fast and efficient. 11mm hexagonal drive shaft. Supplied with replaceable 1/4˝ HSS pilot drill.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1502&product=CK_424038_Hole_Saw_Arbor_With_11mm_Shaft_For_14-30mm_Hole_Saws_424038CK 424038 Hole Saw Arbor With 11mm Shaft For 14-30mm Hole Saws

Hole saw arbour for use with C.K holesaws from 32mm and larger. 11mm hexagonal drive shaft. Supplied with replaceable 1/4˝ HSS pilot drill.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1501&product=CK_424037_Hole_Saw_Arbor_With_8mm_Shaft_For_14-30mm_Hole_SawsCK 424037 Hole Saw Arbor With 8mm Shaft For 14-30mm Hole Saws

Hole saw arbour for use with C.K holesaws up to 30mm. 8mm hexagonal drive shaft. Supplied with replaceable 1/4˝ HSS pilot drill.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1500&product=CK_424025_Hole_Saw_73mm_2.7/8CK 424025 Hole Saw 73mm 2.7/8
Professional quality HSS bi-metal holesaw with hardened vari-pitch teeth for fast clean cutting of holes in steel, stainless steel, die cast metals, nail embedded wood, hardwood floors, plywood, plastics etc.]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1499&product=CK_424006_Hole_Saw_25mm_1CK 424006 Hole Saw 25mm 1"

Professional quality HSS bi-metal holesaw with hardened vari-pitch teeth for fast clean cutting of holes in steel, stainless steel, die cast metals, nail embedded wood, hardwood floors, plywood, plastics etc.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1498&product=CK_424003_Hole_Saw_20mm_25-32CK 424003 Hole Saw 20mm 25-32"

Professional quality HSS bi-metal holesaw with hardened vari-pitch teeth for fast clean cutting of holes in steel, stainless steel, die cast metals, nail embedded wood, hardwood floors, plywood, plastics etc.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1497&product=ATP_HTD-625_High_Accuracy_Thermo-HygrometerATP HTD-625 High Accuracy Thermo-Hygrometer

A high accuracy combined humidity & air temperature meter with wet bulb and dewpoint temperatures. Ideal for a wide range of industrial and laboratory applications. Suitable for single handed operation.

Features:

•    -30°C to 100°C x 0.1°, 0 to 100%RH x 0.1
•    Displays temperature in °C or °F
•    Dew Point & Wet Bulb temperatures displayed at the touch of a button
•    43mm LCD dual display with backlight
•    Connected probe with 1.8m coiled cable
•    Probe mounting clip allows single-handed use
•    Data Hold freezes displayed measurements
•    Min/Max Memory for both temperature and humidity
•    Low Battery indication
•    Auto Power Off – adjustable from 1 to 120 minutes, can be user disabled
•    Impact-resistant ABS case with rubber boot and flip-out desk stand

What's included:

Supplied with carry bag & strap, rubber boot and battery

Technical Specifications:

See the above datasheet for technical specifications.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1496&product=Advanced_Testmate_Solar_PV_Kit_2_(with_FREE_carry_case)Testmate Solar PV Kit 2 (with FREE carry case)

Solar kit consisting of Testmate SMM-100 Solar Professional Irradiance & Multimeter, Mastech MS2138R AC/DC Clampmeter and Socket & See PDIT360 Part P Insulation Tester with FREE carry case with document pouch.

Testmate SMM-100 Solar Professional Irradiance & Multimeter

The Testmate SMM-100 Professional Solar Irradiance & Multimeter has been designed to assist in the installation of Solar PV Systems. The dual display allows for the simultaneous measurement of Irradiance levels and Voltage output ensuring the testing of each Solar panel is performed in an accurate and efficient manner before installation.

Features:

• Solar Irradiance to 1999 W/m2
• AC/DC Voltage to 600V
• Dual display for simultaneous
• Irradiance and Voltage measurement

  

Mastech MS2138R AC/DC Clampmeter

Superb Low Cost, High Performance AC/DC Clampmeter from Mastech.

Ideal for Solar Installations.

Features:

• Conform to the IEC1010-1 & IEC1010-2-032 standard
• Double insulation(protection class 600v cat? and pollution degree 2
• Display :4000 counts and 42 segments bar graph True RMS for AC voltage and current
• Auto/manual range
• Auto zero key for DCA Data hold MAX/MIN function
• Back light Jaw light
• Auto power off
• DC Voltage 4/40/400V±0.8%

 

 

Socket & See PDIT360 Part P Insulation Tester

Features:

• 2 way-250, and 500 volt insulation plus full 200mA continuity test
• Full 17th Edition verification
• Continuity measurement up to 10K ohms
• Uses only 4 x AA alkaline batteries giving over 5000 tests at 500V
• Supplied complete with quality test leads, carrying case & manual
• Fully protected against accidental live voltage contact up to 600V AC
• Null function to eliminate lead resistance up to 2 Ohms
• Intelligent auto shut-off to preserve battery life

 

Technical Specifications:

See the above datasheet for technical specifications

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1495&product=Advanced_Testmate_Solar_PV_Kit_1_(with_FREE_carry_case)Testmate Solar PV Kit 1 (with FREE carry case)

Solar kit consisting of Testmate SMM-100 Solar Professional Irradiance & Multimeter, Mastech MS2138R AC/DC Clampmeter with FREE carry case with document pouch.

Testmate SMM-100 Solar Professional Irradiance & Multimeter

The Testmate SMM-100 Professional Solar Irradiance & Multimeter has been designed to assist in the installation of Solar PV Systems. The dual display allows for the simultaneous measurement of Irradiance levels and Voltage output ensuring the testing of each Solar panel is performed in an accurate and efficient manner before installation.

Features:

• Solar Irradiance to 1999 W/m2
• AC/DC Voltage to 600V
• Dual display for simultaneous Irradiance and Voltage measurement

 

Mastech MS2138R AC/DC Clampmeter

Superb Low Cost, High Performance AC/DC Clampmeter from Mastech.

Ideal for Solar Installations.

Features:

• Conform to the IEC1010-1 & IEC1010-2-032 standard
• Double insulation(protection class 600v cat? and pollution degree 2
• Display :4000 counts and 42 segments bar graph True RMS for AC voltage and current
• Auto/manual range
• Auto zero key for DCA Data hold MAX/MIN function
• Back light Jaw light
• Auto power off
• DC Voltage 4/40/400V±0.8%

 

Technical Specifications:

See the above datasheet for technical specifications.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1494&product=ATP_SL-8851_Precision_Logging_Sound_Level_MeterATP SL-8851 Precision Logging Sound Level Meter

Precision sound level meters designed to meet IEC 61672-1 Class 2 with accuracy of ±1.4dB. A ½" electret condenser microphone ensures accurate and repeatable readings. A modern ergonomically shaped grip, high-intensity backlight and USB interface make these sound level meters extremely convenient to use.

Features:

•    Auto Ranging 30 to 130dB,Manual Ranges 30 to 80dB, 50 to 100dB, 80 to 130dB
•    0.1dB resolution
•    selectable ‘A’ & ‘C’ frequency weighting
•    Fast or Slow response filters
•    58mm LCD display with function indicators, bargraph and backlight
•    Min/Max, Data Hold with Peak Max and Peak Min
•    Over Range and Under Range indication
•    Auto Power Off after 15 min’s of no activity (Can be user disabled)
•    Low Battery indication
•    USB interface for real time transfer of readings to a PC
•    Standard 4mm camera bush for tripod mounting

What's included:

ATP SL-8851, wind muffler, tripod, USB cable (2m), software & hard carry case.

Technical Specifications

See the above datasheet for technical specifications.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1492&product=ATP_LX-1309_USB_Logging_400,000_Lux_Light_MeterATP LX-1309 USB Logging 400,000 Lux Light Meter

Easy-to-use light meter with USB interface, wide measuring range up to 400,000 Lux, large LCD display, 40-segment analogue bargraph, relative mode and user-selectable measuring units. Ideal for environmental monitoring, health and safety checks, and industrial applications.

Features:

•    Measures both Lux and Foot Candles (FC), user selectable
•    Range selection of 4 ranges (Lux), 4 (FC)
•    Impact-resistant ABS case with protective rubber boot
•    Silicon photo diode sensor and spectral response filter
•    Fully cosine corrected
•    Sensor connected to the instrument by a fixed approx 1.5 metre coiled cable
•    Measuring rate of 1.5 times per second
•    43mm LCD display with backlight, 42 segment bar graph and function indicators
•    Data Hold freezes measured values
•    Max/Min Memory
•    Peak Min Hold, Peak Max Hold
•    Relative reading from user set value
•    Over Range indication
•    Reset function
•    Auto Power Off after 30 minutes
•    USB interface for data output to PC
•    Impact-resistant ABS case with protective rubber boot

What's included:

Supplied with carry pouch, rubber boot, Software, USB interface cable, protective lens cap & battery

Technical Specifications:

See the above datasheet for technical specifications.

]]>newavailable for orderhttp://www.test4less.co.uk/details.asp?productID=1491&product=ATP_LX-1308_400,000_Light_Lux_-_Foot-Candles_MeterATP LX-1308 400,000 Light Lux, Foot-Candles Meter

Easy-to-use light meter with wide measuring range up to 400,000 Lux, large LCD display, 40-segment analogue bargraph, relative mode and user-selectable measuring units. Ideal for environmental monitoring, health and safety checks, and industrial applications.

Features:

•    Measures both Lux and Foot Candles (FC), user selectable
•    Manual range selection of 5 ranges (Lux), 4 (FC)
•    Silicon photo diode sensor and spectral response filter
•