Di-LOG Advanced EV 18th Edition Multifunction Tester & EVSE Adaptor Complete Kit DL9130EVKIT
The DL9130EVKIT has been designed specifically for service engineers that offer EV installation as part of their electrical installation portfolio. The kit includes Di-LOG’s latest EV capable MFT along with the DLEV1 EVSE Charge Station Adaptor.
Features & Benefits
- 6mA pure DC test for RDC-DD verification and a full Auto EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection
- Loop Impedance/PSCC – Unique auto start RCD-LOC XLT loop test principle will not trip any RCD or RCBO
- 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection
- RGB colour changing screen visually indicating potential pass/fail conditions
DL9130EV has many new and exciting features critical to the safe verification of EVSECharge Station Installation including 6mA pure DC test for RDC-DD verification and a full EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection.
A totally new feature added specifically to the DL9130EV is Rmax, this brand-new concept will automatically capture the maximum R1+R2 continuity test reading registering the result on the secondary display for recording once testing is complete. In addition, Di-LOG has added the Zmax feature.
Along with a brand new RGB colour changing screen that visually indicates potential pass/fail conditions, the DL9130EV offers, at the press of a button, Zmax, which will record the maximum Zs test recorded during a recording session, the addition of a Type B RCD test, a fully automated Continuity & Earth Loop Auto Start with a secondary display to capture the recorded results, 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection and a variable RDC test feature to dial in bespoke mA values.
The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger. Supplied with a type 1 and type 2 connector plug specifically designed for testing, the DLEV1 kit will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection.
The DLEV1 has a 13A socket for MFT mains lead or can be used for inline load connection. In addition to this, there are also 4mm input terminals for single or 3-phase connections.
The DL9130EVKIT offers incredible value for a feature-packed MFT meeting all the safety and performance requirements of BS EN 61557.