Fluke 324 True-RMS Clamp Meter

Fluke 324 True-RMS Clamp Meter

The Fluke 324 is a versatile clamp suitable for many commercial and residential troubleshooting applications. The Fluke 324 forms part of the affordable Fluke 320 range of clamp meters. The 320 range includes a great range of benefits such as a 2 year warranty, wide 30mm jaw and display hold as standard. Every unit in the range, the 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts.

Measure temperature and capacitance

Stepping up from the Fluke 323, the Fluke 324 adds both temperature (-10.0°C to 400.0°C) and capacitance (100.0μF to 1000μF) measurement, further adding the the units versatility. The Fluke 324 still retains its ergonomic form and is ideal for those who require a reliable and advanced clamp meter but without paying extra for DC current measurement. HVAC engineers will benefit from the addition of temperature measurement on the 324.

What makes the Fluke 324 clamp meter a great measurement tool?

• 400A AC/DC current measurement
• True-rms ac voltage and current for accurate measurements on irregular waveforms
• Range of measurements
  • AC current & voltage
  • Resistance
  • Continuity
  • DC volts
  • Temperature
  • Capacitance.
• Backlit LCD display for use in low light conditions.
• Auto off to save battery power
• 2 year warranty
• 30mm (1.18 in) jaw opening
• Display hold so you don't lose your reading

Fluke 324 full specification.

• AC Current Range: 40.0A / 400.0A
• AC Current Accuracy: 1.5% ± 5 digits (45Hz to 400Hz) (Note: add 2% for position sensitivity)
• AC Voltage Range: 600.0V
• AC Voltage Accuracy: 1.5% ± 5 digits
• DC Voltage Range: 600.0V
• DC Voltage Accuracy: 1.0% ± 5 digits
• Resistance Range: 400.0Ω / 4000Ω
• Resistance Accuracy: 1.0% ± 5 digits
• Continuity: ≤ 30Ω
• Capacitance: 100.0μF to 1000μF
• AC Response: True-RMS
• Backlight: Yes
• Data Hold: Yes
• Contact Temperature: -10.0°C to 400.0°C (14.0°F to 752.0°F)
• Dimensions: 207mm x 75mm x 34mm (H x W x D)
• Weight: 208g
• Category Rating: CAT III 600V, CAT IV 300V

Fluke 320 series comparison

Easily compare the Fluke 323 vs 324 vs 325 using the comparison table below

Fluke 324 calibration

Test4less are an approved Fluke calibration and servcie centre. Test4less can calibrate you Fluke 324 clamp meter before despatch. Simply add the calibration before adding to basket. There is a charge for this service.

Already got a Fluke 324? Book your calibration online.

If you require DC current measurement, then take a look at the Fluke 325 clamp meter which also includes frequency measurement.

What's included

• Fluke 324 clamp meter
• Test leads
• Soft case
• User manual