Fluke 435 Series II Power Quality and Energy Analyzer

£4,845.95

£5,815.14

SKU
NEW_CODE130
pricematch
  • Comes with i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
  • No matter what goes wrong in your facility, with the 435 II you will always be prepared
  • Equipped with advanced power quality functions and energy monetization capabilities.
  • Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
More Information
Warranty 3 years
Price Match Yes

Fluke 435 Series II Power Quality and Energy Analyzer

Think of the Fluke 435 II Power Quality and Energy Analyzer as your insurance policy. No matter what goes wrong in your facility, with the 435 II you will always be prepared. Equipped with advanced power quality functions and energy monetization capabilities, there is no electrical issue this model can't handle.

Features:

  • Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
  • PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
  • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
  • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
  • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
  • Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex design to fit into the tightest places.
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up.
  • System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
  • Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
  • View graphs and generate reports: With included analysis software.
  • Battery life: Seven hours operating time per charge on Li-ion battery pack.
  • Warranty: Three years (parts and labor) on main instrument, one year on accessories

For full specifications, click on the 'Datasheet' tab above.

For some users, loads switching is a cause of power quality problems. When loads switch on, the current draw sometimes causes the voltage to drop to a level that causes other equipment to malfunction. The PowerWave function available in the 435 and 437 Series II models enables users to capture voltage, current and frequency signals simultaneously at a high speed to see which interaction is potentially causing problems. PowerWave goes beyond standard power quality measurements; PowerWave's fast data capture mode enables system dynamics to be characterized.

Waveforms for voltage and current are continuously captured for the specified time, and are displayed on screen in high detail; the power waveform is derived from the data. In addition, half-cycle RMS values for voltage, current, power and frequency can be stored and retrieved for analysis. This feature is particularly useful for testing of standby generation systems and UPS systems where reliable switch-on can be vital.

Fluke 434 / 435 and 437 comparison

  434-II 435-II 437-II
Energy studies
Measure V, I, kW, Cos/DPF, kWhr
Measure MIN/MAX and AVG values
10-day logging
Waste energy monetization
Basic harmonics study
THD measurement (V & I)
Harmonics 1 to 25 for V & I
Advanced harmonics study
Full harmonic spectrum
Power harmonics
Basic industrial PQ troubleshooting
Oscilloscope function
Voltage dips and swells
Advanced industrial PQ troubleshooting
Comprehensive logging capability
Advanced features
Inrush
Flicker
Transients  
Mains signaling  
Power wave  
Event waveform capture  
400 Hz    
Shipboard power    
Power inverter efficiency
Communications
USB
Wireless download
Fluke Connect app
Safety
CAT IV/600 V

 

What's included:

  • Fluke 435 II
  • BC430 Power Adapter
  • International plug adapter set
  • BP290 (Single capacity Li-ion battery) 28 Wh (8 hours or more)
  • TLS430 Test lead and Alligator clip set
  • WC100 color coding clips and regional decals
  • i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
  • 8 GB SD card
  • PowerLog on CD (includes operator manuals in PDF format)
  • USB cable A - Mini B
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account