Fluke 88VA Automotive Multimeter Combo Kit

£509.95

£611.94

SKU
FLU/88/V/A
pricematch
  • Complete automotive diagnostic package for everything you need!
  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument.
  • Peak min/max to capture intermittent events as short as 250 micro seconds.
  • Magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.
pdf
(Size: 265.5 KB)
pdf
(Size: 1.7 MB)
More Information
Warranty 1 year
Price Match Yes

Fluke 88VA Automotive Multimeter Combo Kit

A complete automotive diagnostic package with virtually everything you need in an automotive multimeter

Modern cars have more and more electrical systems. This will only increase further with the introduction of hybrid vehicles. For this, perhaps the most important tool you'll use in troubleshooting is the multimeter. The Fluke 88V has improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional as well as new hybrid vehicles.

New Features

  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Conductance for coil testing
  • Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
  • Peak min/max to capture intermittent events as short as 250 microseconds
  • Large digit display with bright, two-level backlight makes the Fluke 88V significantly easier to read than the old Fluke 88

Other Features

  • 0.1 % dc accuracy
  • 20.000 counts (4-1/2 digit) high resolution mode for precise measurements
  • Measure up to 1000 V ac and dc
  • Current measurements up to 10 A, 20 A for up to 30 seconds
  • Built-in thermometer lets you carry one less tool (temperature probe included)
  • Diode test for alternator testing
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity
  • RPM measurements with inductive pickup (included)
  • Millisecond pulse width measurements for fuel injectors
  • Magnetic hanger to attach meter to the vehicle and free your hands for other tasks
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Peak capture to record transients as fast as 250 µs
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • AutoHOLD to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph to track changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved sleep mode draws less current for longer battery life
  • Access door for fast battery changes without opening up the case
  • "Classic" design with new removable holster with built in test lead and probe storage
  • 10 mega-ohm input impedance won't load circuits, and is safe for computers
  • Lifetime warranty

Safety Specification

  • The Fluke 80 V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

Technical Data

Voltage DC

  • Maximum voltage: 1000 V
  • Accuracy: ±(0.1% + 1)
  • Maximum resolution: 10 µV

Voltage AC

  • Maximum voltage: 1000 V
  • Accuracy: ± ([% of reading] + [counts]): 0.5% + 2
  • AC Bandwidth: 5 kHz
  • Maximum resolution: 100 µV

Current DC

  • Maximum current: 10 A (20 A during 30 s)
  • Accuracy: ±(0.4% + 2)
  • Maximum resolution: 0.01 µA

Current AC

  • Maximum current: 10 A (20 A during 30 s)
  • Accuracy: ±(1.2% + 2)
  • Maximum resolution: 0.01 µA

Resistance

  • Maximum resistance: 50 MΩ
  • Maximum capacitance: ±(0.4% + 1)
  • Maximum resolution: 0.01 Ω

Capacitance

  • Maximum capacitance: 10,000 µF
  • Accuracy: ±(1% + 2)
  • Maximum resolution: 0.01 nF

Frequency

  • Maximum frequency: 200 kHz
  • Accuracy: ±(0.01% + 1)
  • Maximum resolution: 0.01 Hz

Temperature

  • -200.0 °C - 1090 °C: 1.0% + 10, excluding probe
  • Maximum resolution: 0.1 °C

Conductance

  • Maximum conductance: 60.00 nS
  • Accuracy: ±(1.0% + 10)
  • Maximum resolution: 0.01 nS

Duty Cycle

  • Maximum duty cycle: 99.9%
  • Accuracy: ≤ 0.2% per kHz + 0.1%
  • Maximum resolution: 0.1%

Pulse Width

  • 0 - 2 s
  • Maximum resolution: 0.1 ms

RPM

  • 30 - 12000
  • Accuracy: 2
  • Maximum resolution: 1

Environmental Specifications

  • Operating Temperature: -20 °C - 55 °C
  • Storage Temperature: -40 °C - 60 °C

Safety Specifications

  • Electrical Safety: CAT III, 1000 V, CAT IV, 600 V

Mechanical & General Specifications

  • Size: 186 x 86 x 32 mm
  • Weight: 625 g
  • Battery Life: Alkaline: >400 hours typical

What's Included?

  • Fluke 88V Automotive Multimeter
  • TL224 1.5 m long heat resistant silicone test leads
  • TP220 Removeable test probes to pierce corroded terminals
  • AC285 SureGrip Large Jaw Alligator Clip Set
  • TPAK Magnetic hanger to position and hold meter to steel surfaces
  • 80BK Temperature probe
  • RPM80 Inductive RPM pick-up probe
  • C800 Hard carrying case
  • 2 Automotive Backprobe pins
  • Insulation Piercing Probe
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account