Megger MIT420/2 Industrial Telecom Insulation Tester

Name: Megger MIT420/2 Industrial Telecom Insulation Tester
Brand: Megger
SKU: AVO/MIT420
Price: 611.94 GBP

Be the first to review this product

£509.95

£611.94

SKU

AVO/MIT420

Upgraded version of the MIT410/2
Built in memory storage
600V CAT IV rated
10V to 1kV variable output
Capacitance 1nF-10μF

Megger MIT400 Series Datasheet

(Size: 105.1 KB)

Megger MIT400 Series Manual

(Size: 2 MB)

More Information
Warranty	3 years
Price Match	Yes

FREE additional Megger lead set

Megger 1001-963 2 Wire Test Lead Set
Megger 1001-963 2 Wire Test Lead Set High quality 2 wire test lead set from Megger. Can be used as a replacement or spare set of leads for a range of Megger multi meters, clamp meters, insulation testers and more. The leads include standard 4mm connectors, along with GS38 compliant prods and croc clips. A red elongated finger probe is also included. Safety rated CAT III 1000V / CAT IV 600V What's included <ul> <li>Megger red and black test lead set</li> <li>Red and black pods</li> <li>Red and black crocodile clips</li> <li>Long red finger probe</li> </ul>

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Megger MIT420/2 Industrial Telecom Insulation Tester

The Megger MIT420/2 can test insulation, continuity, voltage, capacitance and more, plus store all test results in its onboard memory. Easily recall saved data at a later date, allowing you to get on with testing and removing the need to manually record results in the field. The MIT420/2 is an upgraded version of the MIT410/2, adding the following additional features...

Variable insulation test range (10 - 1000V)
Capacitance 0.1nF to 10μF
On-board memory with recall

Advanced insulation tester

The MIT420/2 features a full range of insulation test voltages (50, 100, 250, 500 and 1000V) as well as a manual range between 10V and 1000V. It can also be used for insulation testing up to 200GΩ as well as PI (Polarisation Index) and DAR (Dielectric Absorption Ratio).

Continuity, frequency and capacitance

For engineers who require more than a simple insulation test, the Megger MIT420/2 also measures continuity between 0.01Ω to 1MΩ with a lead null feature (<10Ω) for improved accuracy. Furthermore, the MIT420/2 can carry our frequency measurement between 15 to 400Hz and a capacitance range of 0.1nF to 10μF.

Built to last

All testers in the MIT400/2 range are IP54 rated, making them suitable for use indoors and out. The instrument is protected via a rubber boot and hard carry case. A stand is also incorporated at the rear for added convenience.

Megger MIT410 vs MIT420 vs MIT430

	MIT410/2	MIT420/2	MIT430/2
Insulation test voltage
250 V, 500 V and 1kV	●	●	●
50 V and 100 V	●	●	●
Variable from 10 V to 1kV	●	●	●
Insulation resistance to	200 GΩ	200 GΩ	200 GΩ
PI, DAR and timed	●	●	●
Lock on	●	●	●
Continuity
0.01 Ω to 10 MΩ	●	●	●
Auto reverse polarity	●	●	●
Test lead null	>10 Ω	>10 Ω	>10 Ω
Voltage measurement
600V AC/DC	●	●	●
mV AC/DC	●	●	●
Frequency measurement	45 - 450Hz	45 - 450Hz	45 - 450Hz
Capacitance
Capacitance 1nF - 10µF	-	●	●
Additional features
PASS/FAIL LIMIT ALARM	●	●	●
Auto power down	●	●	●
Battery powered	●	●	●
Recharger ready	-	-	●
On-board memory	-	●	●
Bluetooth downloading and software	-	-	●
2-wire silicone lead set	●	●	●
Probe incorporating test button	●	●	●
CAT IV 600V rated	●	●	●
IP54 rated	●	●	●
Free calibration Certificate	●	●	●
Warranty upgradeable to 3 years FREE	●	●	●