Anton Sprint Pro6 Multifunction Flue Gas Analyser (with NO & CO2)

Anton Sprint Pro6 Multifunction Flue Gas Analyser (with NO & CO2)

The Anton Sprint Pro 6 is the flagship model in the Pro range. It combines the additional measurement parameters of the Sprint Pro 4 (dual beam infra-red CO2 sensor) and the Sprint Pro 5 (NO and NOx) in one unit. Therefore, the Pro 6 can be used for commercial catering (COMCAT) applications and incident investigations, as well as measuring NO (Nitric Oxide) and NOx (Nitrogen Oxide).

Anton Sprint Pro6 NO & NOx readings

Anton Sprint Pro6 Ambient Air Monitoring CO & CO2

Full range of tests includes

• Oxygen (O2) measurement
• Carbon Dioxide (CO2) measurement
• CO:CO2 ratios
• NO and NOx measurements
• Efficiency
• Excess air temperature
• Flow and return temperature
• Differential temperature
• Pressure: Let by and tightness tests
• CO ambient air monitoring
• CO sweep test – BS7967

Dual beam infra-red CO2 sensor

The Pro 6 is capable of simultaneously monitoring CO2 and CO, allowing the user to conduct COMCAT, incident and CO/CO2 investigations such as CMDDA1. The Pro6 has a range of run durations from 15 minutes to 7 days with pre-set sample intervals for convenience.

Results can be printed using the infrared printer (available separately) or sent to a smart device via the Sprint Mobile app. Furthermore, to make reporting easier, the user can select only to print or show results for intervals over a certain threshold for both CO and CO2. As the threshold increases, the number of intervals recorded above that threshold is shown on screen. This helps prevent lengthy reports and allows quick demonstration to a customer of any potential issues.

All reports are date and timed stamped for traceability.

NO and NOx measurement

With the Anton Sprint Pro 6 you can measure NO (Nitric Oxide) and NOx (Nitrogen Oxide) during flue gas analysis. Readings are displayed on screen and can be printed or sent to the Sprint Mobile app similar to all other measurements. If a high level is detected by the NO sensor, then an audible warning is given to alert the user.

Features:

• High quality UK manufactured Flue Gas Analyser
• Fully compatible with either the iOS or Android versions of the Sprint Mobile app
• Sprint Pro6 has the addition of a dual beam infra-red CO2 sensor for ambient CO2 monitoring requirements.
• Ideal for commercial catering applications and incident investigations.
• Addition of an NO sensor allowing for NO and NOx measurements when in FGA mode
• Full pressure menu, the ability to connect with the supplied gas leak detector
• Unrivalled double protection against damage from condensate ingress
• Condensate trap design is more robust and easier to empty, complete with washable particulate filter
• Robust construction, ergonomically designed for today’s professional engineer
• Intuitive, easy to navigate menu driven software with new large buttons
• High contrast screen with coloured prompts and warnings
• Easy USB-C charging for analyser & printer* at home, on site or in your vehicle
• Drop-in bag design allows quick removal and replacement of FGA and accessories
• Secure click-in flue probe connector to FGA
• Built-in sensor over range protection
• BSI tested to EN50379-1:2012 & EN50379-3:2012
• Suitable for engineers working with BS7967:2015
• Ideal for COMCAT and CO/CO2 investigations such as CMDDA1

*Please note printer not supplied with Sprint Pro6 but available to buy separately if required

What’s included

• Anton Sprint Pro6 Flue Gas Analyser
• Sprint Pro flue probe
• Sprint Pro Drop in carry case
• USB charger and USB charger / comms lead
• Pro Gas Escape Probe
• Spare sponge filter
• Quick start guide
• Calibration certificate