Di-Log DL9118 18th Edition Multifunction Tester
Designed to fully comply with the testing requirements of the 18th Edition. It is designed to be worn around the neck with a comfortable harness, for easy function selecting and testing. Loop Test without tripping any type of RCD or RCBO, with very high accuracy.The DL9118 is also packed full of features, such as a Remote Test Probe, Auto Start Loop & Continuity, Colour Changing LCD display indicating error, and comes complete with a toolbox style Carry Case. All in all, the DL9118 offers incredible value for a feature packed MFT meeting all the safety and performance requirements of BS EN 61557.
Key Features
- Remote Probe Included
- UK’s largest colour LCD display
- RCD-LOC XLT™
- Phase Rotation
- Auto Start Loop & Continuity
- 1000V Insulation Test
Features
- Loop Impedance – Unique auto start RCD-LOC XLT loop test principle will not trip any RCD
- Prospective short circuit current – with auto start and direct readout of PSCC
- High Current Loop Test – auto start loop test with high current Ze measurement
- Phase Rotation Test – will indicate the correct phase sequence
- Continuity test – with auto start & null facility to zero out lead resistance
- RCD testing – Trip time, trip current, auto test and ramp current
- RCD auto test – test RCDs in auto mode and simply recall the test results once finished
- Insulation measurement – with 250, 500 & 1000V test voltages
- Integrated socket polarity test
- Fully protected against damage when accidentally connected across phases
Special Features
- Di-Log’s NEW Xpert Loop Technology provides highly accurate low current loop testing, without the risk of tripping out any RCD or RCBO!
Specifications
| Display | 3½ digit LCD 1999 digits |
| Insulation resistance | 0.05 – 2000 MΩ |
| Test voltage at 1mA | 100, 250,500 V |
| Continuity | 0.05 – 199 Ω |
| Loop Impedance | 0.01 – 2000 Ω |
| PSCC | 0 – 26 kA |
| RCD nominal test currents | 10, 30, 100, 300, 500 mA, ½ x 30 mA, 5 x 30 mA |
| Trip time | 0 – 500 ms |
| Tripping current with ramp test | ½ rated current to 1.1 rated current |
| Voltage | 0 – 440 V |
| Frequency | 45 – 65 Hz |
| Safety standards | EN61010, BS EN 61557 BS 7671 |
| Over voltage category | CAT III 300 V |
| Power supply | 6 x 1.5 V AA batteries |
| Dimensions | 260 x 105 x 55 mm |
| Weight | 836 g |
What’s Included?
- Di-Log DL9118 18th Edition Multifunction Tester
- Test Lead Set Including Remote Probe
- Hard Carry Case
- Certificate Of Calibration
Reviews
There are no reviews yet.