Di-LOG Advanced 18th Edition Multifunction Tester
The DL9100 series multifunction tester has been designed to fully comply with the testing requirements of the 18th Edition.
Made in Britain, the DL9100 also incorporates many of the features that we have come to expect with modern MFTs and more.
The DL9120 has many exciting new features including a brand new RGB colour-changing screen visually indicating potential pass/fail conditions, a Type B RCD test, a fully automated Continuity & Earth Loop Auto Start with a secondary display to capture the recorded results, 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection and a variable RDC test feature to dial in bespoke mA values.
The DL9120 offers incredible value for a feature-packed MFT meeting all the safety and performance requirements of BS EN 61557.
A comparison table of recent di-log 18th edition MFT’s is below
DL9110 | DL9118 | DL9120 | DL9130EV | |
Loop testing | ||||
2-wire no-trip test | – | – | ● | ● |
Conventional 3-wire no-trip test L-PE | ● | ● | ● | ● |
Max. Zs display | – | – | – | ● |
R Max (Max R1+R2 recording) | – | – | – | ● |
PSCC and PFC (26kA max.) (L-PE/L-N) | ● | ● | ● | ● |
Phase-Phase Line Test (L-L) | – | ● | ● | ● |
Auto Start Loop & Continuity | ● | ● | ● | ● |
Insulation testing | ||||
250V, 500V voltages | ● | – | – | – |
250V, 500V and 1kV test voltages | ● | ● | ● | |
Alarm Warning Audible | ● | ● | ||
Alarm Warning Audible & Screen | – | – | ● | ● |
Continuity and resistance | ||||
200mA test current for certification | ● | ● | ● | ● |
15mA test current to prolong battery life ( 200mA Selectable) | – | – | – | ● |
Auto start continuity test | ● | ● | ● | ● |
Voltage / Frequency and Phase Rotation | ||||
0V to 440V | ● | ● | 0-480V | 0-480V |
Frequency 45Hz to 65Hz | ● | ● | ● | ● |
Phase Rotation | – | ● | ● | ● |
RCD testing | ||||
10, 30, 100, 300, 500mA RCDs | ● | ● | ● | ● |
High Speed auto RCD test | ● | ● | ● | ● |
Ramp test for RCD fault finding | ● | ● | ● | ● |
Type A, type AC and Type S RCDs | ● | ● | ● | ● |
Variable RCDs | – | – | – | 1mA – 500mA |
Type B RCDs | – | – | ● | ● |
6 mA RDC-CC (EVSE) | – | – | – | ● |
Auto EV RCD Test Sequence | – | – | – | ● |
Additional benefits | ||||
CATIII 600V rated IEC61010 | ● | ● | ● | ● |
Remote test probe | – | ● | – | ● |
Colour RGB display | ● | ● | ● | ● |
Colour change indicates error | ● | ● | ● | ● |
Hard plastic carry case | ● | ● | ● | ● |
IP40 Rating | ● | ● | ● | ● |
Calibration certificate included | ● | ● | ● | ● |
DiLog DL9120 18th Edition Advanced EV Multifunction Tester Key Features
- RGB colour changing screen visually indicating potential pass/fail conditions
- Type B RCD test
- Fully automated Continuity & Earth Loop Auto Start with a secondary display
- 2/3 wire high current loop with intelligent detection
- Variable RDC test feature to dial in bespoke mA values
- Loop Impedance/PSCC – The unique auto-start RCD-LOC XLT loop test principle will not trip any RCD or RCBO
- Phase to Phase Loop with Phase Rotation Test – will indicate the correct phase sequence
What’s Included
- Di-LOG Advanced EV 18th Edition Multifunction Tester
- Hard plastic carry case
- Calibration certificate included
Reviews
There are no reviews yet.