Fluke T150 Voltage & Continuity Tester
The Fluke T150 is the most advanced two pole voltage tester from Fluke. The T150 retains all the features of the Fluke T90, T110 and T130, with the addition of resistance measurement up to 1999Ω.
Dual visual voltage indication on the Fluke T150 is provided by the incremental LED indicator and backlit LDC display. Additional indication is provided by an audible tone and vibration feedback. this makes the T150 suitable for reliable indication in almost any environment.
The T150 is designed to be exceptionally rugged, reliable and user friendly. It features dual insulated cable that is tested to 3x the required bend angle, as well as benefiting from Fluke’s unique CableHealth function which alerts the user automatically if there is an issue with the lead. The T150 can be operated whilst wearing PPE, such as gloves, thanks to it large rubberised buttons
Fluke T150 key features
- Four way voltage indication so you can always be sure
- AC/DC voltage detection range of 6V – 690V
- Built in super bright LED torch for use in dark areas
- Secure probe storage for added safety
- carry out resistance measurement up to 1999Ω
- Phase rotation indicator for 3 phase systems
- Display hold function for additional convenience
- Switchable load to avoid ghost voltages
- Cable wear performance up to 6 times better than before
- CableHealth technology automatically alerts the user to any issues
- Backlit LCD display display voltage being measured
- Audible tone can be switched off for use in quiet areas
- Tip protector to prevent accidental injury
- Low battery indicator
Fluke voltage tester comparison
| T90 | T110 | T130 | T150 | |
| Backlit LED Indicator | ● | ● | ● | ● |
| Backlit LCD Digital Display | – | – | ● | ● |
| Continuity Test – Visual Results | ● | ● | ● | ● |
| Continuity Test – Audible Results | ● | ● with on/off |
● with on/off |
● with on/off |
| Vibratory Indicator Under Load | – | ● | ● | ● |
| Display Hold | – | – | ● | ● |
| Voltage Test | ● | ● | ● | ● |
| Indication of Polarity | ● | ● | ● | ● |
| Resistance Measurement | – | – | – | ● |
| Switchable Load | – | ● | ● | ● |
| Single Pole Test for Phase Detection |
● | ● | ● | ● |
| Rotary Field Indicator | – | ● | ● | ● |
| Probe Tip Protection | ● | ● | ● | ● |
| Voltage Display with Discharged Battries |
● | ● | ● | ● |
| Electrical Torch Function | – | ● | ● | ● |
| Wear Indicator Test Lead Wire | ● | ● | ● | ● |
Fluke voltage tester specification
| T90 | T110 | T130 | T150 | |
| Voltage AC/DC | 12V – 690V | 12V – 690V | 6V – 690V | 6V – 690V |
| Continuity | 0-400kΩ | |||
| Frequency | 0/40-400Hz | |||
| Phase Rotation | – | 100V-690V | ||
| Resistance Measurement | – | – | – | Up to 1999Ω |
| Response Time (LED Indicator) | <0.5s | |||
| 200kΩ Input Impedance | Current Draw 3.5mA @ 690V Current Draw 1.15mA @ 230V |
|||
| 7kΩ Input Impedance (with load buttons pressed) | – | Current draw 30mA @ 230V | ||
| Safety Rating | CAT II 690V CAT III 600V |
CAT III 690V CAT IV 600V |
||
| IP Rating | IP54 | IP54 | IP64 |
IP64 |
What’s included
- Fluke T150 Voltage & Continuity Tester
- Probe Storage Accessory
- Instruction Manual
- Push-On Probe Tips
Reviews
There are no reviews yet.