Martindale PD690SX Proving Unit with CALCHECK
The Martindale PD690SX makes proving your voltage tester, quick, safe and very easy. With the addition of the CALCHECK feature, the PD690SX can also be used to verify the insulation and low resistance ranges on 18th Edition multifunction instruments and single function insulation testers. Checking correct operation between calibrations is a procedure recognized by electrical contractor assessment bodies.
Prove you voltage indicator
The PD690SX units voltages are stepped, with clear LED indication at each voltage of 50V / 120V / 230V / 400V and 690V. This is matched to the ranges of many common voltage testers, such as the Martindale VIP150.
To operate, simply push the prods of the voltage tester into the holes on the PD690SX. The voltage will begin at the maximum of 690V and step down through each level until it reaches 0V. At the end, the continuity of voltage testers is checked.
Check continuity and resistance on site
It is best practice to check the ongoing accuracy of your 18th edition tester between calibrations. The PD690SX can be used prior to certifying new wiring installations, or issuing a condition report.
With this proving unit from Martindale, you can check continuity at 0.5Ω and 1.0Ω, as well as resistance at 0.5MΩ and 1.0MΩ.
Easy to take with you
The PD690SX is small and lightweight. It is powered by six AA batteries and will fit in almost any tool bag. A low battery warning will trigger to alert the user to change the batteries.
What’s included
- Martindale PD690SX Proving Unit with CALCHECK
Reviews
There are no reviews yet.