TPI 9080 Vibration And Bearing Condition Analyser (Choice of Kit)



  • Collect data using VibTrend software
  • Standard Cable mounted accelerometer with magnet
  • Built-in Bluetooth communication capability
  • USB docking station to download to a PC
(Size: 2.3 MB)
More Information
Warranty3 years
Price MatchNo

TPI 9080 Vibration And Bearing Condition Analyser (VibTrend PC software included)

The TPI 9080 retains all the features of the TPI 9071, plus includes a range of additional features and benefits.

Vibration analysis at the touch of a button

Easy to use with built in ISO and BDU red, amber and green traffic light alarms. The TPI 9080 makes it simple to spot unbalance, misalignment and looseness in belts, pumps, motors, fans and much more. This unit also calculates vibration signals automatically based on the machine's running speed.

The units also features an 800 line spectrum with zoom in order to pinpoint complex issues.

Bearing in mind

Recognising issues early on can help prevent costly breakdowns and failures that may occur if issues are not identified and rectified. The wearing and replacement of bearings is inevitable, however, knowing the correct time to replace them can be difficult. The 7080 specially displays bearing condition (BDU) as well as general vibration, allowing the user to make an informed decision.

The BDU alarm values can be adjusted manually if required. As a default they are set to…

  • GREEN – Below 50
  • AMBER – Between 50 – 100 (warn bearing)
  • RED – Above 100 (bad bearing)

TPI 9080 vs 9071

The TPI 9080 includes the following features over the TPI 9071.

  • Carry case supplied as standard
  • USB docking cradle for data download to PC
  • Unlimited assets and test points (PLUS and PRO kit only)
  • Set designated maintenance routes
  • Receive alerts when 9080 is docked
  • Collect, email and trend data over time to prevent failures

TPI 9080 specification:

 Size 200 mm x 60mm x 26mm
 Weight 280g (not including magnet)
 Water, Sand & Dust: IP67 Waterproof
 Operating 0°C to 50°C
 Storage -20°c to 70°C
 Power supply 2 x AA batteries
 Battery life Auto power OFF - typically 20 hours continuous operating time
 depending on brightness setting.
 Frequency range 2 Hz to 1kHz (ISO) 1 kHz to 10 kHz (BOU)
 Max frequency resolution 1.25 Hz @ 800 lines FFT setting
 Acceleration in g
 Velocity in mm/s (or inch/s)
 Bearing noise in BOU (bearing damage units)
 Displacement (mm, microns, inch)
 Displayed Frequency Units Hertz (Hz), RPM or CPM
 Input range User selectable with accelerometer sensitivity
 Dynamic range 96 dB (0.01g resolution)
 VA diagnostic bands (RPM = run speed) Unbalance 1x RPM
 Alignment 2x RPM
 Looseness 3x RPM
 Accessories • A9081 PC docking cradle - USB connection
 • A9087 Nylon carrying case
 Options • A9082 Strobe attachment
 • A9080 Bluetooth ear defenders/headphones
 • A9084 100mm (4 inch) stinger
 • A9084 Vibtrend software full version

Suitable for any industry

The 9080 is designed for use in virtually any market, there is even an Ex intrinsically safe version available. There are also 3 kits to choose from for the standard TPI 9080, standard kit, pro kit and plus kit.

Enhanced frequencies

  • 2/10Hz to 1kHz covers the ISO frequency for Misalignment, Looseness and Imbalance issues
  • 1kHz to 10kHz covers the Bearing Condition

Standard kit

  • 9080 vibration meter
  • A9012 BNC cabled accelerometer
  • A9073 magnet mount
  • A9081 Docking cradle and USB cable
  • A9087 Carry case
  • VibTrend PC software limited to 10 assets

Pro Kit (Standard Kit plus)

  • VibTrend PC software with 1 each A9084 PC License for unlimited number of assets

Plus Kit (Pro Kit plus)

  • A9072 stinger 100m
  • A9082 BNC strobe / flashlight
  • A9086 magnetic protective rubber boot

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account