T&R 750ADM MK4 260P High Power 750A Single Unit PCITS

  • Ideal for power system protection testing
  • Primary current injection up to 750A AC
  • 16V 40A output for secondary injection
  • True RMS metering with cycle capture

£9,006.00 (ex VAT)

£10,807.20 (inc VAT)

Earn 9006 points

Contact us for delivery date

Why buy from Test4Less?

  • Ideal for power system protection testing
  • Primary current injection up to 750A AC
  • 16V 40A output for secondary injection
  • True RMS metering with cycle capture
Free Shipping

Spend over £100 on any new goods order and receive automatic free shipping

Rewards

Points make purchases! For every £1 spent, earn back 1p that can be spent on any future new goods purchase

Our Price Promise

We offer a Price Match Promise! Find an equivalent tester for a cheaper price on a competitor site, and we’ll do our best to match it

Express Delivery & Calibration

Express Delivery is currently unavailable for customers wishing to add calibration to their New Goods order. For more information, visit our Delivery Information page. 

£9,006.00 (ex VAT)

£10,807.20 (inc VAT)

Earn 9006 points

Contact us for delivery date

Customers also viewed

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS
T&R 750ADM MK4 260P High Power 750A Single Unit PCITS delivers primary current injection up to 750A for testing power system protection devices and other applications that need a high-current AC source. Its dual outputs cover a range of test conditions, while the separate 16V, 40A output supports secondary injection and higher-impedance trip testing. The compact design makes the unit suitable for both field and workshop use.

Four True RMS metering ranges support accurate test work and let users set the meter scale and trip level independently of the selected output. The system captures times below 20ms and measures the RMS value of a single cycle. Its flexible timing functions measure trip, reset and reclose times, while two contact inputs accept normally open or normally closed contacts and can trigger from a volt-free contact or DC voltage.

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS stores test data on a USB memory key, including waveform and THD information. Electronic overcurrent and thermal protection help safeguard the unit during operation, while the large back-lit liquid crystal display keeps readings clear and easy to view. Automatic mains voltage selection and automatic switch-off at the end of a test further simplify operation.

 

Key Benefits
  • Supplies up to 750A for demanding primary injection tests on power protection equipment.
  • Dual outputs allow low-current and high-current test requirements to be handled by one system.
  • The 16V, 40A output supports secondary injection and higher-impedance trip testing.
  • Four True RMS metering ranges allow the meter scale and trip level to be set independently.
  • Single-cycle capture supports accurate measurement of fast events taking less than 20ms.
  • Flexible timing functions make it easier to measure trip, reset and reclose times.
  • USB data storage provides a convenient way to retain test data, waveform information and THD.
  • Electronic overcurrent and thermal trips provide built-in protection during testing.
  • A large back-lit LCD gives clear access to readings and test information.
  • Automatic switch-off at the end of a test helps simplify the test sequence.

 

Common Applications

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS is suitable for a range of testing, maintenance and inspection tasks, including:

  • Testing circuit breakers.
  • Primary injection testing of over-current relays.
  • Testing auto-reclosers.
  • Testing miniature circuit breakers.
  • CT ratio testing with an external meter for secondary current.
  • Measuring protection device trip times.
  • Measuring reset times.
  • Measuring reclose times.

 

Why Choose This Model?

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS combines up to 750A primary current injection with a 16V, 40A secondary injection output, True RMS metering, flexible timing and USB test-data storage. It is also available in either a metal case or a Pelican transport case to suit different handling requirements.

pdf
pdf
T&R 750ADM MK4 260P High Power 750A Single Unit PCITS

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS is a compact primary current injection test set designed for testing power system protection devices and other applications that require a high-current AC source. It can supply primary injection current up to 750A and provides dual outputs to suit a range of test conditions. A separate 16V, 40A output also supports secondary injection and higher-impedance trip testing.

Accurate test work is supported by four True RMS metering ranges, allowing the meter scale and trip level to be set independently of the selected output. The system can capture times of less than 20ms, including the RMS value of a single cycle, while its flexible timing functions support measurement of trip, reset and reclose times. Two contact inputs can work with normally open or normally closed contacts and may be triggered by a volt-free contact or DC voltage.

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS also combines practical recording, protection and handling features for field and workshop use. Test data can be stored to a USB memory key, including waveform and THD information, while electronic overcurrent and thermal protection help protect the unit during operation. A large back-lit liquid crystal display, automatic mains voltage selection and automatic switch-off at the end of a test further support clear and convenient use.

 

Key Benefits
  • Supplies up to 750A for demanding primary injection tests on power protection equipment.
  • Dual outputs allow low-current and high-current test requirements to be handled by one system.
  • The 16V, 40A output supports secondary injection and higher-impedance trip testing.
  • Four True RMS metering ranges allow the meter scale and trip level to be set independently.
  • Single-cycle capture supports accurate measurement of fast events taking less than 20ms.
  • Flexible timing functions make it easier to measure trip, reset and reclose times.
  • USB data storage provides a convenient way to retain test data, waveform information and THD.
  • Electronic overcurrent and thermal trips provide built-in protection during testing.
  • A large back-lit LCD gives clear access to readings and test information.
  • Automatic switch-off at the end of a test helps simplify the test sequence.

 

Common Applications

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS is suitable for a range of testing, maintenance and inspection tasks, including:

  • Testing circuit breakers.
  • Primary injection testing of over-current relays.
  • Testing auto-reclosers.
  • Testing miniature circuit breakers.
  • CT ratio testing with an external meter for secondary current.
  • Measuring protection device trip times.
  • Measuring reset times.
  • Measuring reclose times.

 

Why Choose This Model?

T&R 750ADM MK4 260P High Power 750A Single Unit PCITS combines up to 750A primary current injection with a 16V, 40A secondary injection output, True RMS metering, flexible timing and USB test-data storage. It is also available in either a metal case or a Pelican transport case to suit different handling requirements.

Product Comparison
Feature T&R 750ADM MK4 260P High Power 750A Single Unit PCITS T & R 750ADM-H Primary Current Injection Test Set
Maximum primary injection current Up to 750A Up to 750A
Secondary injection output 16V, 40A 16V, 40A
Metering True RMS digital metering with single-cycle capture True RMS metering ranges
Timing system Multi-function timing system Measures trip, reset and reclose times
Protection Electronic overcurrent and thermal protection Electronic overcurrent and thermal trips
Automatic mains voltage selection Yes Yes

 

General Specifications
Specification Details
Product type Primary current injection test set
Output arrangement Dual outputs for primary and secondary injection requirements
Display Large back-lit liquid crystal display
Metering type True RMS digital metering
Data storage USB memory key storage including waveform and THD data
Timing system Multi-function timing system for trip, reset and reclose time measurements
Contact inputs Two inputs, triggered by volt-free contact or DC voltage; auto-sensing for normally open or normally closed contacts
Protection Electronic overcurrent and thermal protection
End-of-test function Automatic switch-off at end of test
Mains selection Automatic mains voltage selection
Case options Available in metal or Pelican case

 

Measurement and Accuracy Specifications
Specification Details
Maximum primary injection current Up to 750A AC
Low-voltage primary output 4V output
Secondary injection output 16V, 40A
Metering ranges Four True RMS metering ranges
Meter and trip-level setting Meter scale and trip level can be set independently of the selected output
Fast-event timing Capture of times below 20ms
Single-cycle measurement RMS value of a single cycle can be measured
Timing measurements Trip time, reset time and reclose time

 

Mechanical and General Information
Specification Details
Metal case weight 23.5 kg
Metal case dimensions 380 × 314 × 221 mm
Pelican case weight 27.4 kg
Pelican case dimensions 560 × 456 × 265 mm
Construction and handling Compact and portable design
Connection arrangement Industry-standard connectors
User interface Clear and simple user interface

 

Specification Notes
  • Current measurement uses four True RMS ranges, and single-cycle RMS capture is supported for fast events.
  • The two contact inputs automatically sense normally open or normally closed contacts and accept volt-free contact or DC voltage triggering.
  • Overall weight and dimensions vary according to whether the metal case or Pelican transport case is selected.
What’s Included
  • T&R 750ADM MK4 primary current injection test set
  • User manual / operating manual
  • Calibration certificate
  • Mains lead
  • Spare fuses / spare fuse set

Ask a question

Ask a question | Product pages