ACT CA60 mA Current Clamp
The ACT CA60 mA Current Clamp measures low current without requiring circuit wires to be disconnected. It handles AC and DC current and provides measurement capability from milliamps through to 60 A. Its narrow 9 mm jaw opening helps the clamp reach conductors in confined circuit panels and closely grouped wire bundles. Connection to a suitable digital multimeter provides a direct current readout.
Two selectable output settings, 1 mV/10 mA and 1 mV/100 mA, support different current measurement needs. The ACT CA60 mA Current Clamp works with multimeters offering 200 mV and/or 2 V ranges and an input impedance of at least 1 MΩ. A red LED gives a clear low-battery indication, while typical alkaline battery life is 100 hours. The clamp is well suited to commissioning, maintenance and alarm inspection work where current readings need to be recorded for future reference and fault finding.
Key Benefits
- Measures current without disconnecting the circuit wire, helping reduce disruption during testing.
- Covers both AC and DC current for flexible use across supported inspection and maintenance tasks.
- Narrow 9 mm jaws make it easier to reach individual conductors in tight circuit panels and wire bundles.
- Provides direct readout through a compatible digital multimeter with suitable voltage ranges and input impedance.
- Offers two selectable output settings to suit different current levels: 1 mV/10 mA and 1 mV/100 mA.
- Supports recording of current readings for commissioning, maintenance and later reference.
- Recorded readings can assist with identifying detector and cable faults linked to abnormal current.
- Red low-battery LED provides a visible indication when clamp power is running low.
- Typical 100-hour alkaline battery life supports extended use between battery changes.
Common Applications
ACT CA60 mA Current Clamp is suitable for a range of testing, maintenance and inspection tasks, including:
- Measuring low mA current in connected circuits
- AC current measurement
- DC current measurement
- Alarm system inspection
- Commissioning current checks
- Routine maintenance inspections
- Recording current readings for future reference
- Investigating detector faults linked to abnormal current
- Investigating cable faults linked to abnormal current
Why Choose This Model?
The ACT CA60 mA Current Clamp combines AC/DC current measurement up to 60 A with a compact 9 mm jaw opening and two selectable output settings. It is designed for direct connection to a compatible multimeter while allowing current measurements to be taken without disconnecting circuit wires.






