HT IMP57 High Resolution Impedance Measurements Adapter
The HT IMP57 is a slave instrument with a resolution of 0.001Ω and high test current of 200A. The instrument works as an accessory with many other HT instruments/testers. It joins to the master instrument using a RS232 serial lead as the IMP57 is blind and has no screen.
It will test L-N, L-L and L-E, calculating the line impedance, and short circuit current to the resolution as above. The instrument is directly supplied by its own test leads and the electrical network under test; therefore it does not require any additional batteries, just a live system.
It is provided with special cables with double-contact alligator clips (the black and red parts of the alligator clip are electrically separated and make two different test points).
The red sides of the alligator clips represent the Current Circuit (C1 and C2), while the black sides (P1 and P2) represent the Voltage measurement reading. Hopefully this will reveal your protective devices are perfectly sufficient.
Features:
- Loop/Line Impedance measurement P-P, P-N and P-PE
- Maximum and Minimum calculation values of prospective short circuit current
- Measures with high resolution (0.1mOhm)
- 4-wire measurement method
- RS-232 interface for connection with Master meters
- LED indication on frontal panel
- Voltage AC measurement
- Frequency measurement
Specificiations:
Measurement mode | 4 wire high resolution Line impedance measurement. |
Max Test Current | 202A |
Conformity | The instrument is according to: EN60909-0, VDE 0413, EN61557-3 |
The instrument complies with | EN 61010, EN61557 |
Insulation | Class 2, double insulation |
Pollution level | 2 |
Maximum height | 2000m |
Overvoltage category | CAT III 240V (to Earth) |
Power supply | 220 – 415V nominal (from P1 and P2 inputs) |
Frequency | 50Hz±5% |
Dimension | 340mm (W) x 300mm (L) mm x 150mm (H) |
Weight | approx. 4100g (without accessories). |
Operating temperature | 0°C to 40 °C, <80 % R.H. |
Storage temperature | -10°C to 60°C, <80 % R.H |
What’s Included?
- C7000 : Set of cables for 10A test, lenght 3m
- C2001 : Optical/RS-232 cable
- B80 : Carrying bag
- ISO9000 calibration certificate
- User manual on CD-ROM
Reviews
There are no reviews yet.