Fluke 87V True RMS Industrial Digital Multimeter
Fluke 87V Digital Multimeter is built for hard industrial work and fast fault finding. It gives stable readings in busy electrical systems, so users can test with more confidence. As a result, it suits plant work, power distribution and service tasks where clear results matter.
Designed for rough sites, this meter combines strong build quality with broad test functions. It handles True RMS AC and DC checks, and it also measures resistance, capacitance, frequency, duty cycle, temperature, conductance and diode response. In addition, the case is made to withstand drops up to 1 metre.
Accurate Results In Demanding Circuits
Noise can make readings harder to trust, yet the Fluke 87V Digital Multimeter is made for that problem. Its True RMS system gives accurate voltage and current values on non linear signals, while the selectable low pass filter helps on motor drives. Therefore, users can work on difficult circuits with less guesswork.
For more detail, the meter offers a 6000 count display and a 20,000 count mode for fine measurement work. Peak capture records transients as fast as 250 microseconds, and Min Max Average recording tracks changes over time. Touch Hold also helps capture steady values in noisy areas.
Practical Features For Daily Use
Daily use feels simple because the control layout is clear and flexible. Fluke 87V Digital Multimeter offers both auto and manual ranging, plus a bright two level backlight and an analogue bargraph for fast signal changes. A built in thermometer also adds temperature testing without the need for a separate meter.
This model meets CAT III 1000V and CAT IV 600V standards through independent testing, and it uses an input alert to warn against incorrect jack use. It also allows quick battery changes with a secure door that keeps the calibration seal intact.
Key Features
- True RMS measurement supports non linear signals
- Selectable low pass filter aids motor drive testing
- Built in thermometer allows temperature checks
- Touch Hold helps lock stable readings on screen
- Large display uses a bright two level backlight
- Analogue bargraph tracks fast changing signals
- Input alert gives an audible warning for wrong jack use
- Auto and manual ranging support different test styles
- Peak capture stores very fast transient events
- Min Max Average recording tracks changing values
- Battery door allows quick changes in the field
- Supplied holster stores leads and probe during travel
- Relative mode helps remove test lead resistance in low ohms work
Technical Specifications
| Manufacturer | Fluke |
| Manufacturer part code | 3947858 (Standard), 5140033 (Max) |
| Display counts | 6000 counts with 3 3/4 digit display |
| High resolution mode | 20,000 counts in 4 1/2 digit mode |
| DC voltage maximum range | 1000 V |
| DC voltage best resolution | 0.1 mV |
| DC voltage accuracy | ±0.05% + 1 digit |
| AC voltage maximum range | 1000 V |
| AC voltage best resolution | 0.1 mV |
| AC voltage accuracy | ±0.7% + 2 digits |
| DC current maximum range | 10 A with 20 A for up to 30 seconds |
| DC current best resolution | 0.01 µA |
| DC current accuracy | ±0.2% + 2 digits |
| AC current maximum range | 10 A with 20 A for up to 30 seconds |
| AC current best resolution | 0.01 µA |
| AC current accuracy | ±1.0% + 2 digits |
| Resistance maximum range | 50 MΩ |
| Resistance best resolution | 0.1 Ω |
| Resistance accuracy | ±0.2% + 1 digit |
| Conductance range | 60 nS |
| Conductance best resolution | 0.01 nS |
| Conductance accuracy | ±1.0% + 10 digits |
| Capacitance maximum range | 9999 µF |
| Capacitance best resolution | 0.01 nF |
| Capacitance accuracy | ±1.0% + 2 digits |
| Frequency maximum range | 200 kHz |
| Frequency best resolution | 0.01 Hz |
| Frequency accuracy | ±0.005% + 1 digit |
| Temperature range with included 80BK probe | -40.0 °C to 260 °C |
| Temperature range with optional probes | -200.0 °C to 1090 °C |
| Temperature accuracy | 1.0% with 0.1 °C resolution |
| Duty cycle accuracy | ±0.2% per kHz |
| Safety rating | Independently tested to CAT III 1000V and CAT IV 600V |
| Drop resistance | Withstands 1 metre drops |
| ATEX safety rating | II 2 G Ex ia IIC T4 |
| Warranty | Limited lifetime warranty |
Document Downloads
What’s Included
- TL75 test leads
- AC72 alligator clips
- Yellow holster
- 80BK temperature probe
- 9V battery installed
- CD-ROM with user manual and technical notes
- Operator’s guide
You must be logged in to post a review.
Reviews
There are no reviews yet.