TPI 9080 Vibration And Bearing Condition Analyser (Choice of Kit)
The TPI 9080 retains all the features of the TPI 9071, plus includes a range of additional features and benefits.
Vibration analysis at the touch of a button
Easy to use with built-in ISO and BDU red, amber and green traffic light alarms. The TPI 9080 makes it simple to spot unbalance, misalignment and looseness in belts, pumps, motors, fans and much more. This unit also calculates vibration signals automatically based on the machine’s running speed.
The units also feature an 800 line spectrum with zoom in order to pinpoint complex issues.
Bearing in mind
Recognising issues early on can help prevent costly breakdowns and failures that may occur if issues are not identified and rectified. The wearing and replacement of bearings is inevitable, however, knowing the correct time to replace them can be difficult. The 7080 specially displays bearing condition (BDU) as well as general vibration, allowing the user to make an informed decision.
The BDU alarm values can be adjusted manually if required. As a default, they are set to:
- GREEN – Below 50
- AMBER – Between 50 – 100 (warn bearing)
- RED – Above 100 (bad bearing)
TPI 9080 vs 9071
The TPI 9080 includes the following features over the TPI 9071.
- Carry case supplied as standard
- USB docking cradle for data download to PC
- Unlimited assets and test points (PLUS and PRO kit only)
- Set designated maintenance routes
- Receive alerts when 9080 is docked
- Collect, email and trend data over time to prevent failures
TPI 9080 specification:
| Size | 200 mm x 60mm x 26mm | |
| Weight | 280g (not including magnet) | |
| Environmental: | ||
| Water, Sand & Dust: | IP67 Waterproof | |
| Operating | 0°C to 50°C | |
| Storage | -20°c to 70°C | |
| Power supply | 2 x AA batteries | |
| Battery life | Auto power OFF – typically 20 hours continuous operating time depending on brightness setting. | |
| Frequency range | 2 Hz to 1kHz (ISO) 1 kHz to 10 kHz (BOU) | |
| Max frequency resolution | 1.25 Hz @ 800 lines FFT setting | |
| Acceleration in g Velocity in mm/s (or inch/s) Bearing noise in BOU (bearing damage units) Displacement (mm, microns, inch) | ||
| Displayed Frequency Units | Hertz (Hz), RPM or CPM | |
| Input range | User selectable with accelerometer sensitivity | |
| Dynamic range | 96 dB (0.01g resolution) | |
| VA diagnostic bands (RPM = run speed) | Unbalance 1x RPM Alignment 2x RPM Looseness 3x RPM | |
| Accessories | • A9081 PC docking cradle – USB connection • A9087 Nylon carrying case | |
| Options | • A9082 Strobe attachment • A9080 Bluetooth ear defenders/headphones • A9084 100mm (4 inch) stinger • A9084 Vibtrend software full version | |
Suitable for any industry
The 9080 is designed for use in virtually any market, there is even an Ex intrinsically safe version available. There are also 3 kits to choose from for the standard TPI 9080, standard kit, pro kit and plus kit.
Enhanced frequencies
- 2/10Hz to 1kHz covers the ISO frequency for Misalignment, Looseness and Imbalance issues
- 1kHz to 10kHz covers the Bearing Condition
Standard kit
- 9080 vibration meter
- A9012 BNC cabled accelerometer
- A9073 magnet mount
- A9081 Docking cradle and USB cable
- A9087 Carry case
- VibTrend PC software limited to 10 assets
Pro-Kit (Standard Kit plus)
- VibTrend PC software with 1 each A9084 PC License for an unlimited number of assets
Plus Kit (Pro-Kit plus)
- A9072 stinger 100m
- A9082 BNC strobe / flashlight
- A9086 magnetic protective rubber boot
Reviews
There are no reviews yet.