Shop

Showing 469–480 of 1652 results

• 
  In Stock - Express Delivery Available

  Three Phase Power Quality Analyser Calibration

  £125.00 (ex VAT)
  £150.00 (inc VAT)
  • Verifies that your three phase power quality analyser measures electrical parameters accurately across the specified ranges
  • Readings are checked against traceable reference standards to confirm performance
  • Helps ensure reliable measurements of voltage, current, frequency and power quality across three-phase systems for troubleshooting, maintenance and compliance testing
  • 3-or-free turnaround with calibration completed within three working days, including certificate and calibration records
  More info
• 
  In Stock - Express Delivery Available

  Torque Screwdriver Calibration

  £33.00 (ex VAT)
  £39.60 (inc VAT)
  • Verifies that your torque screwdriver applies torque accurately across the specified range
  • Readings are checked against traceable reference standards to confirm performance
  • Helps ensure reliable torque application for assembly, maintenance and quality control processes
  • 3-or-free turnaround with calibration completed within three working days, including certificate and calibration records
  More info
• 
  In Stock - Express Delivery Available

  Torque Wrench Calibration (up to 1100nm)

  £45.00 (ex VAT)
  £54.00 (inc VAT)
  • Verifies that your torque wrench applies torque accurately up to 1100 Nm across the specified range
  • Readings are checked against traceable reference standards to confirm performance
  • Helps ensure reliable torque application for mechanical assembly, maintenance and quality control
  • 3-or-free turnaround with calibration completed within three working days, including certificate and calibration records
  More info
• 
  In Stock - Express Delivery Available

  TPI Flue Gas Analyser Calibration

  £95.00 (ex VAT)
  £114.00 (inc VAT)
  • Verifies that your TPI flue gas analyser measures combustion gases accurately across the specified range
  • Readings are checked against traceable reference standards to confirm performance
  • Helps ensure reliable flue gas measurements for combustion efficiency checks, maintenance and compliance testing
  • 3-or-free turnaround with calibration completed within three working days, including certificate and calibration records
  More info
• 
  In Stock - Express Delivery Available

  TPI 312C Pocket Digital Thermometer

  £14.40 (ex VAT)
  £17.28 (inc VAT)
  • -50°C to +150°C measurement range
  • ±1°C accuracy with 0.1° resolution
  • IP67 rated with auto power off
  • 4.9 inch stainless steel stem probe
  More info
• 
  In Stock - Express Delivery Available

  TPI 368 Infrared Thermometer

  £22.00 (ex VAT)
  £26.40 (inc VAT)
  • Non-contact spot checks in under 2 sec time
  • 1:1.3 close-focus ratio for small targets
  • Fixed 0.95 emissivity, 7–14 µm band sensor
  • Range -22 to 120°C with ±2% accuracy reading
  More info
• 
  In Stock - Express Delivery Available

  TPI 50 Non-Contact AC Volt Tester

  £18.80 (ex VAT)
  £22.56 (inc VAT)
  • Non-contact AC sense from 50–1,000 V
  • Red LED tip and buzzer confirm live AC
  • Slide along insulated wires for quick checks
  • Always-on pen uses 2 AAA batteries supplied
  More info
• 
  In Stock - Express Delivery Available

  TPI 725A Pocket Combustible Gas Leak Detector

  £45.00 (ex VAT)
  £54.00 (inc VAT)
  • 40 ppm sensitivity for fast leak tracing
  • LED display shows gas levels up to 5000 ppm
  • Audible alarm and visual LEDs for alerts
  • Compact pocket unit uses two AAA batteries
  More info
• 
  In Stock - Express Delivery Available

  TPI 9070 Vibration & Bearing Condition Analyser

  £506.00 (ex VAT)
  £607.20 (inc VAT)
  • 2 Hz to 3 kHz frequency range
  • 72 dB dynamic measurement range
  • 800 line FFT spectrum analysis
  • IP67 rated housing protection
  More info
• 
  In Stock - Express Delivery Available

  TPI 9071 Vibration & Bearing Condition Analyser

  £660.00 (ex VAT)
  £792.00 (inc VAT)
  • 4-button operation with traffic light alerts
  • ISO & BDU analysis for machine condition checks
  • Stores 200 readings with 800-line spectrum
  • IP67 rated with accelerometer & magnet
  More info
• 
   Usually ships In 3 to 5 working days

  TPI 9080 Vibration & Bearing Condition Analyser (Choice of Kit)

  From £1,100.00 (ex VAT)
  £1,320.00 (inc VAT)
  • Measures vibration up to 10kHz range
  • 96dB dynamic range with ±60g input
  • 800 line FFT spectrum analysis
  • IP67 rated with Bluetooth and USB
  More info
  This product has multiple variants. The options may be chosen on the product page
• 
   Usually ships In 3 to 5 working days

  TPI 9080-EX Intrinsically Safe Smart Vibration Meter

  £3,500.00 (ex VAT)
  £4,200.00 (inc VAT)
  • Vibrations patterns can be logged over time via the datalogging function
  • IP67 rated outer-casing; ideal for heavy and continual use
  • Intrinsically safe & ATEX/IECEx rated
  • Frequency measurement range of 0 to 10kHZ
  More info