Fluke 113 Digital Multimeter
Fluke’s 113 Multimeter is designed for basic electrical tests and repairing most electrical problems. The 113 features Fluke’s unique VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage (up to 600A) or continuity, meaning you no longer have to carry out two separate tests. There is also improved accuracy with True-rms ac measurements on non-linear loads, a feature more commonly associated with higher priced multimeters.
The Fluke 113 Multimeter also features a large back lit display for use on low light conditions, as well the ability to record signal fluctuations using the Min/Max function. Fluke have also added a diode test function along with capacitance and resistance measurement to make the 113 a toolbox essential.
Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety.
Features at a glance
- Designed for everyday use – Small enough to fit in your hand and drop tested from 1 meter.
- True RMS – Accurate ac measurements on non-linear loads
- Simple to use – Easy turn rotary dial and large back lit LCD screen
- Integral holster with probe holders for easy storage
- Auto and Manual ranging – Selectable for user preference
- Diode test for testing general-purpose germanium, silicon, and power diodes
- Best for: Utility applications involving basic electrical tests.
- Revenue meter tests: Involving meter sets and reconnects, capacitor checks, detection of absence or presence of voltage, and for continuity, connections or basic wiring checks
- Simultaneous voltage and continuity checks: Check LoZ low impedance function allows users to check voltage and continuity simultaneously.
Fluke 113 Multimeter Full Specification
| Fluke 113 | Fluke 114 | Fluke 115 | |
| Counts | 6000 | 6000 | 6000 |
| True-rms readings | AC | AC | AC |
| Auto/manual ranging | ● | ● | ● |
| Voltage AC/DC | 600V | 600V | 600V |
| Current AC/DC | – | – | 10A |
| Resistance | 60kΩ | 40MΩ | 40MΩ |
| Frequency | – | – | 100kHz |
| Continuity/diode test | ● | ● | ● |
| VCHEK | ● | – | – |
| LoZ: low input impedance | ● | ● | – |
| Analog bargraph | ● | ● | ● |
| Backlight | ● | ● | ● |
| Min/Max recording | ● | ● | ● |
| Display Hold | ● | ● | ● |
| Automatic selection, AC/DC volts | ● | ● | ● |
| Closed case calibration | ● | ● | ● |
| Separate battery/fuse access | ● | ● | ● |
| Automatic Power Off | ● | ● | ● |
| Low Battery Indication | ● | ● | ● |
| Warranty (years) | 3 | 3 | 3 |
| IP Rating | IP42 | IP42 | IP42 |
| Safety rating (EN 61010) CAT III | – | 600V | 600V |
| Safety rating (EN 61010) CAT IV | 600V | – | – |
- Best for: Utility applications involving basic electrical tests.
- Revenue meter tests: Involving meter sets and reconnects, capacitor checks, detection of absence or presence of voltage, and for continuity, connections or basic wiring checks
- Simultaneous voltage and continuity checks: Check LoZ low impedance function allows users to check voltage and continuity simultaneously.
What’s Included
- Fluke 113 Multimeter
- Test Leads with 4mm lantern tips
- Protective cap holster
- Installed battery
- User manual
Reviews
There are no reviews yet.